circular saw guide track jig for precise cutting [woodworking] 

Great idea for accuracy if you don't have a table saw and not making too deep of cuts. Keep up the great work as the goal is to continue to inspire others to DIY and build something awesome!

I built 2 (much simpler versions), 1 is 4' and the other is 8'. On both, I put anti-slip tape on the bottom so I don't have to clamp them down. I still will if I REALLY need to be extremely precise and get paranoid, but for all the jobs I've done so far, the tape works perfectly well as long as you don't put a lot of sideways pressure on the saw (which you shouldn't be doing anyway).

지금까지 본 가운데 제일이라고 말해도 좋고, 아주 멋진 완벽한 지그입니다.

You should put a block of wood under the sled itself to help mitigate tear out, beyond that, awesome job. I’m definitely gonna make one of these!

You make such a useful videos I love all of them so far. I am not in the habit, but now I felt to write something positive comment . You are doing great, keep up uploading videos like this!

Very nice. I will make something similar in the near future. I wanted to ask if you have or plan to add an outfeed table for your table saw? I notice that when you make cuts that you hold the board down at the end of the cut and either turn the saw off or lower the blade. I used to do that then I added an outfeed table to support the wood. It was a way to make using the saw safer. You are very skilled and I enjoy watching your videos a great deal. If you have children or grandchildren you could teach them about wood working too. Thank you again for all you do. Stay safe and I hope everyone is happy and healthy.

Thanks, just what I need.

fantastic 100% accurate

Felicitaciones (chile)

Great idea & Good job 👏👏👏👍👌

احسنت

Very nice work

The machine run in the channel, what is the point of the fence?

Very nice. One question why do you need a guide fence on the jig if the saw carriage is riding in a Dado grove?

Wood working SKIL..

Wawww mantap good

❤️😊❤️❤️

👍👍👍👍👍👍💐💐💐💐💐💐💐💐💐💐💐💐💐💐💐💐💐

👍👍😎😎

За счёт большой толщины приблуды, да + еще и направляющей, просто украл 3 см по глубине пропила. Монстра какого то наваял.

안녕하세요. 혹시 구매가능할까요ㅡ^^??

The base is too thick. You will lose some of the depth when cutting thicker board.

I have made a very simple one before but I need to be careful that the saw doesn't come to the right ans ruin the cut as it doesn't have anything to hold on place. Your design is much better. I tho k it is my favorite so far and I will one just like yours but maybe out of 12mm instead of 18mm. Awesome idea. I love it. Keep up the good work.

Зачем делать направляющую, если есть настольная пила... Некоторые товарищи не работали с деревом, за то пытаются умничать. Мастеру спасибо за идею 👍

I loved the sound of the rain, and I really like the music you use at the end of the video too. I always look forward to that!

Hello, Thanks for your share, can you give me dimension of your sled, I like to made one same as you

How many cm is the saw blade? How much wood can a machine cut on 2 floors?

I like this, but I think that the piece of wood you are using as the shoe of the saw is too thick. It robs the blade of its maximum cutting depth. I think you could have used a piece of 5mm thick acrylic just as successfully. Thanks for sharing.

Excellent work, man! Really fantastic jig!!! 😃 Stay safe there with your family! 🖖😊

Hey J. What a great take on this tool. As always, bringing fresh insight, perspectives, and innovations to tried and trusted methods. I REALLY need to make one of these. I've neglected my handheld saw so badly that I haven't even changed the blade since the 90s...I'm just awful sometimes. It's a great saw too but I just hardly ever use the thing. But, if I'd make something like this, I'd get more use out of it because it would be better to use. Thanks for visiting this technique. Great video.

Am I missing something? 3/4” of cutting depth sacrificed from the sled?

Hi sir good video but what about 2mm saw blead you have to add 2 mm more all the time in cutting cut right size

Nice ! You are sacrificing some cutting depth. How did you decide the thickness of the plates?

Колхозник... Украл рабочую область у пилы ахаха )))

Nice ... but what if u have to cut board 2m long , 5 cm width to 2.5 cm 😐😐😐 This is a massive problem... can't find good solution... 😓😠😕

Great idea and so calming to watch. You have a special gift in teaching table saw safety by going slow and carefully planning all of your cuts. 👏

Buen Video, una consulta... ese separador que coloca en minuto 4:46 para que sirve? que funcion cumple? pues despues ya no lo utliza. Gracias por responder.

I didn't understand the purpose of the fence at the end of the build attached to the track. If the saw runs in the track, it shouldn't be able to move.

좋은영상 잘보고는 갑니다. 목공을 시작하는 초심자에겐 너무 부담스러운 영상이네요....원형톱 하나 사서 합판 자르고 각재 가르고 이것저것 해보다 원하는 절단면을 만들지 못하던 중 가이드 트랙이란걸 알게 되어서 이런 영상까지 보게 되는데...가이드 트랙을 만들려면 저런 장비(테이블쏘 ?)가 필요한건지? 아니면 나 좋은 장비로 필요없는 트랙 만들고 놀면서 일기 쓰는 사람이야...하는건지???? 18mm plywood(합판)이 두껍단 소리나 하고...혹시 핵심은 원형톱 가이드 트랙엔 18mm 합판이 두꺼우니 12mm를 추천한다 이건가요?

Ahem!!! There are two simple ways to make this jig. One way is to fix the wood strip to the moving panel, and cut a groove in the main board to accommodate the strip. Do not use the narrow board. Another way is to fix the narrow board onto the wide board and do not cut a groove in the main board, or fix a strip to the sliding panel.

Hello your are not allowed to ware long sleeve jacket while working on high speed cutting machines, mind itt ! Your not professional understood dont miss guide innocent people or be prospective to give such idea 💡

Perfect for small projects. Not got a lot of power so if the wood starts to flex it stops the saw pretty easy. Use it for small tasks and you will be happy. Safety system Works great ru-vid.comUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c .lose your grip on the saw it shuts off and the sheath closes over exposed saw.

홈파기날 이름이 먼지요 혹시 구매처 알수있을가요? 디월트테이블쏘에 호환되나요?

딱한가지 마음에 안드는건 바닥에 붙어있지 않고 10mm 이상 절단면과 떠 있다는것 어쩔수 없다는걸 알면서 . . .

Excellent work. Thanks for sharing your knowledge, Congratulations from Spain.

J, why do you use both a miter groove and the fence? Can you just use the saw with the miter without the fence. Seems to me that the fence would do nothing when the miter slot is keeping the saw in line.

Когда чел в одежде с длинными рукавами потянулся к дальнему от себя краю, чтобы убрать обрезок, я подумал, что он отчаянный парень.. 🤔

이거 10인치 circulat saw인가보죠...나무가 아깝게 느껴짐.

Thank you very much the tutorial,i try already and usefull

Merci beaucoup pour la vidéo

The best. Sorry that I'm 2 years late for this video.

Thta is a great job 👍👍👍 but the boards were a bit too thick wernt they, lose a fair bit of cutting room

ok.... you made a tool guide track at a low cost.

Danke für das Hochladen 👍 👍 👍 Und auch für das Zeigen, da es für meine Handkreissäge keine Anschlagscchiene mehr giebt. L ♥️ 🌞 G Bleiben Sie Gesund

Prats for using wrong screws they are not wood screws the are plasterboard screws

어린이날도 작업하시네요 쌤이 만드신건 1220에서 사용하기 적당한것 같습니다 혹 2440에도 사요가능한 지그도 부탁 드리면 안될까요?

Kamsahamnida for this! 1st is Korean Drama, now... Korean Woodworking!

congratulations to master success bi vidoe

Al final,siempre hay que usar prensas para que no se mueba la guia.

Why would it need a fence if there is already a runner running on the slot?

Very nicely done nice jig take care 😀👍

You a true carpenter a see you made your own table saw incert

Great video. Very accurate and effective. Thanks.

awesome jig thanks for share we appreciate that

merci

Simple, rapide, précis ! Excellent.

bau ich nach

💪👏👍

hai j ilike your circular saw hehe...

Пипец полный! Нагородил херни на каретке съел 20мм на направляюшей 16 или 18 мм сколько на рез осталось!? за счет толщины направляющей не прилегает плотно к листу какой к черту точный рез!?

not bad, but you loose so much cutting depth by using a sole and a track that thick, all you can cut with it are sheet material, but then again that is mostly what you need a track saw for.

Show 🇧🇷💯

Thanks , love your design!!!

Hopefully track saws go down in price soon. It's rediculus that they cost more than most portable table saws.

If you have a professional table saw, and you use it to create it, why do you need a cutting guide for a disc saw? It's unnecessary! It's absurd!

👍👍👍👍

Молодець

Low tech rules.

sogui !!!

ㅁ사고싶습니다 ~~~~

😍👍👍👍🙋‍♀️💕

I tried making wooden guides for my circular saw. It might work ok the first few times, but the wood always warps and makes it scrap.

malakia fence

lovely job mate

See the part where I clamp something straight is usually where I end up stopping. Cool project though

Mantap jiwa

Excelente le copiare su guia, gracias muy buen trabajo.

Amazing 👍👍👍

저도 비오는 소리가 좋네요

Nice job brother 👍

great idea just found.

Muito bom ! 🇧🇷

👍👍👍👍👍😉😉😉😉😉😉

Very useful

Thank you sir.

👌👍👊

👍🏻👍🏻👍🏻

Nice Jig J! 👍👍👏👏

WOW! All you need is £2000 worth of workshop equipment to do it!

This is the best free software Ive seen. Respect.