Clay Bar Detailing How To Clay Your Car Properly

Подписаться 347 тыс.

Просмотров 52 тыс.

50% 1

Bilt Hamber Fallout remover
tinyurl.com/yatmso96
Bilt Hamber Tar and Panel Cleaner
tinyurl.com/y9ttdbqb
Bilt Hamber Clay Bars
tinyurl.com/y7ggze7z
Clay Lube
tinyurl.com/ycu4stm3
----------------------------------------------------------------------------------------------------------
MY CAR DETAILING COURSE COURSE - CAR DETAILING FUNDAMENTALS - IS OUT NOW!!
The Forensic Detailing Channel special offer price is now £39*, (usually £249*) just follow the link below and use launch code: FORENSICDETAILING (if it doesn't embed automatically with the link).
This price gives you access for 60 days, but annual or lifetime purchases are also available.
*Prices may vary depending on which currency you use but discount percentages are the same. Discount will be applied automatically at checkout.
ioa.pxf.io/c/2687409/1012495/...
----------------------------------------------------------------------------------------------------------
Become a Forensic Detailing Patreon for exclusive product reviews:
/ forensicdetailing
----------------------------------------------------------------------------------------------------------
Facebook: Forensic Detailing Channel
Instagram: @forensicdetailing
Twitter: forensicdetailing @rover8200
My Vlogging Camera
amzn.to/2YncEhP
My Main Camera
amzn.to/2V9puhN
Bargain £1 Mini Inpection Torches
amzn.to/2Hu9Eo9
Bargain Amazon Wash mitts
amzn.to/2Wp2xFg
Recomended Products
**TRY DISCOUNT CODE FORENSIC FOR 10%**
Pre-Wash Snow Foam
tinyurl.com/y8xnhp2l
Shampoo
tinyurl.com/ybk8guwb
All Purpose Cleaner
tinyurl.com/ydxd2orh
Fallout remover
tinyurl.com/yatmso96
Tar and Panel Cleaner
tinyurl.com/y9ttdbqb
Clay Bars
tinyurl.com/y7ggze7z
Clay Lube
tinyurl.com/ycu4stm3
Paste Wax
tinyurl.com/ycy629nb
Drying Aid/QD Concentrate
tinyurl.com/ya5ralad
Sealant
tinyurl.com/yagvpxxe
Detail Spray
tinyurl.com/ydamwfs8
Water Spot Remover
tinyurl.com/y9wczlco
Tyre and Trim Dressing
tinyurl.com/yb6fopsj
Machine Polishers
tinyurl.com/ybpsrvjj
Polishing Pads
tinyurl.com/y8j8nhsp
Polishes
tinyurl.com/y9yd5zzx
Panel Wipe
tinyurl.com/y8vcnxj3
Microfiber Buffing cloths
tinyurl.com/yaau8m97
Twisted loop Drying Towel
tinyurl.com/ybr3nhmp
Mini Plush Drying Towels
tinyurl.com/ycykoxep
Wash Mitts
tinyurl.com/y7vqlx74
#forensicdetailing #detailing

Авто/Мото

Опубликовано:

5 июн 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 231

@dogbite5509 3 года назад

A well known tip - soften the clay bar in warm water before the claying stage. Just makes the clay easier to shape.

@archiepezek 3 года назад

I watch a lot of detailing videos and I have to say that I really enjoy the way you present your material. It's not like some people that sound like they're reading from a book--you explain yourself very well from a normal-guy perspective and it's different and refreshing. Thanks Jon and keep up the great work.

@justjosh11 3 года назад

I agree. So many videos on RU-vid these days are so highly edited/crisp that it feels more like marketing than genuine content. I love this channel for not only the content, but it feels like 'real advice', and not like I'm being sold something

@davidboyce6427 2 года назад

Iv’e . said before Jon reminds me of my college chemistry professor and his narration is story time lessons. Ima huge fan an not to mention Jon is humorous 👏🏾👏🏾

@dougwilliams44 Год назад

He's is good right!

@0956y 3 года назад

Sometimes I wish I just did not knew all this. Just run the car through the carwash and drive straight out.

@trprod241 3 года назад

Bro I feel this...

@jasonashley9853 2 года назад

I love cleaning my car but detailing is a pain in the ass. I do prefer washing at home though. Cheaper and I feel I can do more.

@kevinb7058 3 года назад

I touched up a few stone chips on my bonnet a week ago and they felt high a week later so used the soft BH clay bar and was nicely surprised when it levelled them out 👍 Good tip on using the mitt with Korrosol, I was using way too much every time 👍👍

@gary1981xx 3 года назад

Did my Mk8 Golf Rline this am. I’d no idea about using it until I saw you use it. It blew my mind. Your videos have really helped me. 👍🏻

@jpan7071 2 года назад

So many good things come from Great Britain-you’re one of them. You are just simply brilliant, mate. The main thing is I trust you because your commitment to your craft is undeniable.

@ForensicDetailing 2 года назад

Thx u sir for kind words

@junepugh6431 3 года назад

Thanks Jon very helpful video. Going to get my car done this week hopefully. Love a clean car..

@philtaylor9038 3 года назад

Hi Jon, I clay barred/polished my friends' car last week as he works near a farm (won't say what the fallout was) but when he returned this week all he could say was sorry about the state of the car. After a snow foam etc it looked newish I reckon after last week's treatment this helped to clean it.

@JoshuaLynn 2 года назад

A thumbs up for the FDC Haka alone. It took me a rewatch to get it, but a genuine laugh brightened my day. Thanks, John for the excellent content.

@chrisdunn8215 3 года назад

Hi ya John good video as usual I know what u mean about the tar a fallout still on the paintwork underneath a sealant I just bought a 5 series the dealer did exactly the same to me. A useful TIP with the built hamber clay is to put the clay into some hot water before you use it, it makes it much easier to fold and work with 👍

@dougwilliams44 Год назад

Now that ya mention, in the U.S. dealers are NOTORIOUS for as you say, "Sealing OVER Bloody Crap"! Best detailing channel I've seen ever! Thanks M8 & of course, have a lovely day!

@AntEloftheHouseofEl 3 года назад

Good video Jon! Thanks. I do things a little differently personally, but its horses for courses i guess. I put my clay in a jug of hot water to soften it first. Much much more malleable then and much less likely to marr the paint I've found. I also don't use clay lube either. I use Garage Therapy Zero decon as a contact wash but also as a pre-wash snow foam. I'll then use what's left over in my cannon and bucket as my clay lube as I work my way around the car. I just find it has brilliant lubricity and the added surfactants just seem to make the claying process even more effective for me. Plus the car has then had, effectively, three hits with the zero decon. There's always a lot less contamination left meaning I don't need as much clay. Lol.

@mazdaram226 11 месяцев назад

Love your passion, helping my confidence to detail my car … cheers for sharing your knowledge for free..

@refinitionchoooonze 3 года назад

Love the warm up Jon 🤣🤣🔥🔥🔥

@stephendoyle7298 3 года назад

Great video was looking for this kind of video on the steps and application of decontamination very clear 👍

@Mouse2113 2 года назад

That BH mild clay is my go to these days after using a few other brands over the years. Does a great job without marring the paintwork

@neilwalker5041 3 года назад

I really appreciate the knowledge you shared with us!

@shealaking8557 3 года назад

Helpful video and commentary, Jon. Thanks for sharing.

@woncho1 3 года назад

I’ve be using Bilt Hamber clay bar for a few years now, is must be 1 of the best.

@haydenhoneyfield6155 3 года назад

Thanks John I recently brought bilit hamber clay bar after seeing the reviews I'm hoping to get the car ready before a car show on the 19th of June I'm going to be using a da as I don't think the car has ever been polished

@jonnyware9061 Год назад

Great detailed vid! I got this clay bar as a present but not used it yet. A couple of years ago.. I’d better get on and use it as didn’t realise it had a shelf life! Never used a clay bar before so your advice really helps. I’ve got a 30yr old and 21yr old car to do and I don’t think they’ve ever seen a clay bar! Also I read somewhere that immediately after claying you should wax it to protect the paint? Thanks!

@as680783 2 года назад

Hi Jon. I agree, Bilt Hamber make far superior clay compared to other brands. They really think through the packaging too. Love how they use a wax paper and talc to keep the clay from sticking to the case. *Quick question: What are the dilution ratios for the ONR for claying?* 😎

@paulswan8987 3 года назад

Hi Jon, I used the Bilt Hamber mild clay bar for the first time a few weeks ago following recommendations from one of your earlier videos. What I wasn’t prepared for however was the amount of marring and apparent damage it inflicted on the soft Black Toyota paint despite following every step religiously. It was always my intention to machine polish afterwards but the sense of dread after claying as a novice caused a squeaky bum moment.

@ketillundsrensen6167 3 года назад

Thats sucks. But like you say Toyota might have a soft paint. My Mercedes didn't show eny noticeable marring. But a good polish and a good vax and you will be very happy. Claying is not for washing but for preparing for polish

@Calendyr 3 года назад

I switched from claybars to nanoskin decontaminations sponges 7 years ago and never looked back. The way I do it now is to clay and wash at the same time. So I start with the pre-wash with a degreaser in the snow foam cannon, then pressure wash, do the fall out remover, pressure wash, wash with ONR and clay with the sponge while the panel is still wet, then dry the panel. Doing it this way adds maybe 15 minutes to the washing step, it's really, really fast. I normally use the fine sponge unless I notice heavy contamination. Sponges won't remove as much as claybars, but they don't scratch as much either and they save you a ton of time.

@benrowe681 3 года назад

Man Iv missed you !!!! 💪🏻💪🏻 great video !

@jamiejack764 3 года назад

Looks like your weight loss is going well. Keep up the good work Jon.

@beneast2933 3 года назад

Another helpful video, as always! The BH clay box says to wash / rinse after claying, which adds more work. Helpful to know I could just microfibre / towel afterwards as you did. It also says just use water as lube which worked fine for me (I used the fine spray from the hose).

@chriscoralAloha 3 года назад

OK. Need to comment. I have used clay bar a few times before but never saw good results. After your video i tried your technique. I now see a big difference. Thank you and keep up the great work.

@ForensicDetailing 3 года назад

thats great news, this is good clay. the only down side is the stiffness in winter.

@chriscoralAloha 3 года назад

@@ForensicDetailing I live in Cocoa Beach Florida. What is winter?

@parkview113 3 года назад

thanks John. such an important subject easily ignored or misapplied....

@stuarth902 3 года назад

I use BH clay. To keep it malleable I break off a few usable size pieces & keep them in a bucket of hot water.

@glennlambert5112 3 года назад

I always use BH. I put it in jug hot water and use rolling pin to get it thin enough.

@daveallsopp320 2 года назад

Hi John what about the windscreen? I too bought a car from the main stealers they put on the autoglym lifeshine with the carbon coat on the first wash I did there was areas that weren’t even beading + you can feel the roughness on the bonnet, I’m getting into the gyeon way of cleaning any other good stuff to use, Cheers keep up the informative videos👍🏽👍🏽👍🏽👍🏽

@PixelVogue 3 года назад

Video starts at 0:18 lol bloody nice editing Jon!

@Muscliffekarate 2 года назад

Great video. I only use bilt hammer clay but use water as the lube. Would you recommend a different lubricant instead??

@JABZtheJAAT Месяц назад

Hi mate great video, when you spray karrosol and wipe it with a mitt does the mitt have to be soapy? or can i use dry mitt. Thank you

@TheVWMechanic_official 3 года назад

Just watched this very good video thanks :)

@ashleytatham5003 3 года назад

I'm not into car detailing, but your videos are good, like the products reviews and how to, which have helped me with the car cleaning something you don't see much of is the cleaning and re dying of softop on cars anyway keep up the good work

@peterowen4456 3 года назад

Think I'm a bit like you. I do look after my car and use some of the tips to avoid inflicting damage. I started using a wash mitt after watching detailing videos for example. Must admit heavy decontaminating procedures scare me a bit!

@ashleytatham5003 3 года назад

I have done clay bar, not to hard to do then I used the new turtle wax paste its good stuff

@moorwatch9654 2 года назад

Great video as always, picked up a V8 Mustang the other day and apparently the manager had spent an afternoon polishing it and another one…I could see it a mile away thanks to the white residue in every panel gap and join and around the door handles etc…thanks for going the extra mile…not lmao 🤣

@garethsefton4937 10 месяцев назад

Cheers, love your videos. Cracking up at the Google rant 🤣🤣🤣

@darrellnaylor7618 2 года назад

jon just bought some bilt hamber auto soft clay after watching one of your videos going to give it a try on my 3 year old suzuki vitara,would like to ask you 2 questions if you don,t mind 1 my suzuki has a metalic paint will it be ok to use it. 2 if during the process the clay gets grubby can i wash it off carry on when finished can i rinse the clay make sure it,s clean and be able to use the same peice a second time later. all this is a bit new to a 79 year old pensioner, got to admit i am old school. many thanks jon

@LucaBonato 3 года назад

Using first tar and glue remover might expose rust deposits under the tar... Also tar might contain small particles of asphalt, prone to deep scratching your paint... Personal experience, I prefer to do tar remover prior to cleaning my car, wash my car, dry it, iron remover, rinse it and claying it. So you actually just dry your car twice. Also using an acid shampoo prevent water spotting during claying

@aerialogy6144 3 года назад

It is a satisfying feeling when i see the same car i care for being under the tests 😄

@Jnaszty559 3 года назад

My favorite clay is AM details clay from Alan. You can use just water as a lubricant and works well.

@ptheledge5390 3 года назад

Can just use water with the BH clay bar too 👌🏼

@Jnaszty559 3 года назад

@@ptheledge5390 I Just use AM details clay cause white details uses it in his videos and introduced me to it .

@serenahansen2394 3 года назад

Bilt Hamber clay is very good value for money, as are all of their products to be honest.

@bonnylad1 3 года назад

What are peoples thoughts around how often you should clay? Is it just a case of when it needs it or should you limit it to ‘protect’ the paint?

@finesserossko2522 3 года назад

i have found my self applying fallout remover onto the car then applying a thick snow foam over the top and using a finishing sponge to agitate the surface rather than a wash mitt.

@miguelcunha6664 3 года назад

ONR dilutions to make John's life easier: 1:256 rinseless wash 1:64 clay lube 1:16 quick detailer

@chrismorgan3302 3 года назад

I just discovered the wonderful world of ONR. Are there other uses and what dilutions would those be?

@miguelcunha6664 3 года назад

@@chrismorgan3302 you may use onr to clean interiors too at any of those dilutions. Good also to prime or clean pads between passes when polishing

@ketillundsrensen6167 3 года назад

What is ONR?

@miguelcunha6664 3 года назад

@@ketillundsrensen6167 Optimum No Rinse

@jonnyware9061 Год назад

Never heard of the Korrosol before! Sounds like if it’s turning rusty contaminants purple then it must be similar to Kurust that’s a rust converter… and if it Shri is it that she’s great sense as the clay bar will lift it off easier! At the back of my car is an excessive amount of rust particles on the paintwork from the exhaust. I’d better get some of this stuff pronto! Ps in the video where you use the sponge/ microfibre applicator and take it out of the bucket; is the suds on the car from the Korrosol or is it car shampoo from the bucket you’re working it in with to wash the stuff off? Thanks again!

@modifiedcarguy4615 3 года назад

Hi John just a quick one what’s best a rotary motion polisher or a da polisher for swirls just brought a m135i f20 and it’s got a lot of swirls

@OwenMathiasYES 3 года назад

This video inspired me. I cleaned both cars and used Korosol and Clay Bar'ed for the first time, before polishing and waxing properly. It took nearly two days and I was so happy. I used so many of your videos for reference. But a week later and both cars have watermarks, tree leaves and sap, and bird poo. What do you recommend for maintaining clean cars because I don't want to have to deep clean every week, but won't a snow foam remove the polish and wax that I added last weekend? Once you've got a clean car, what do you recommend to maintain it? Thanks in advance. :D

@ForensicDetailing 3 года назад

love posts like this Owen. The bad news is no matter what you do the cars get dirty and having fresh protection can mean dried water spots are more noticable. So have some Koch Chemie FSE to remove water spots (make sure car is clean first) dont worry about stripping the wax, LSP is cheap and easy to apply. trust your LSP and reapply when its totally dead in 3-6 months. you can maintain it with detail sprays or nice easy spray and rinse.. but trust the LSP mate.

@79blustone 3 года назад

I know this has nothing to do with clay bar. Just wondering what is really good at preventing yellow headlamp haze. Buying a new car and want to keep the lacquer on the lamps from turning yellow. Any tips?

@dougwilliams44 Год назад

I wonder, would this likely remove a sandy feeling dust? Seems embedded in the base/clear paint on me '69 Plymouth? Mostly on the roof. Ive used the Turtle wax, it will shine it up, but? I still have the "Sandy" feel. Thanks M8 and great video! Cheers!

@user-tr6kh8rl6p 3 года назад

Thanks!

@daffyd5867 3 года назад

Clay bar prep is the best thing since sliced bread

@jamesstewart1794 3 года назад

How can you tell when the black one is dirty tho ?

@tonyryan1285 3 года назад

Opinions on claying glass aswell as paint?

@supersaabclaire Год назад

I really need to do this to my beloved Saab, I have always loved looking after my vehicles but these days my hands suffer from arthritis and I find I really struggle, plus I don't have any cover for the car so I'm washing, polishing outside in the elements and therefore I'm extremely time limited to these long processes that the car needs 😢

@iancollins2325 3 года назад

Jon as usual excellent informative video, can i ask though? you advised it might help holding the bar with gloves on but in the video you were bare handed, is that your preference? I can't recall a quick mention about dropping the bar and to bin it straight away, hence it's usually a good idea to split the bar before use into manageable sizes.

@ForensicDetailing 3 года назад

hey ian sorry I missed this. Im not too fussed but perhaps with the gloves on the clay is easier to hold but yer Im not overly fussed on that. If you drop it I would bin it.

@iancollins2325 3 года назад

@@ForensicDetailing Jon, Don't worry about not seeing my comments, with everything you're doing some things will fall by the wayside. Once again keep up the great videos.

@gtails7584 3 года назад

Best intro ever 🤣🤣

@ReapaPete 3 года назад

Are synthetic clays any good?

@michaelcavanagh7848 3 года назад

Jon , love the channel mate. One question, machine polishing is the only step I have yet to attempt but I have no garage , just the driveway. Is it possible to achieve a good standard outdoors or is it just too risky with outdoor variables (airborne contaminants , weather etc)

@ForensicDetailing 3 года назад

hey there just pick a good day mate with no wind and not too sunny but dry and you will be fine.

@davidcassidy2731 3 года назад

All a lot of dealerships are interested in is the marketing aspect of putting a sealant on a vehicle and pleasing the majority who don't know any better. My car had an autoglym package put on the paint when I bought it no bad thing in theory but they'd made an utter mess of the paint with a ten minute grind over with a rotary polisher. Took me half a day with some scholl to get it half decent.

@jameshind6644 3 года назад

I found the easy way to check for contamination is to use a thin sandwich bag over you hand and run your hand with the bag over the paintwork. You will feel every bit of grit embedded. Far better than using your hand and you don’t deposit skin oil on the paint.

@blademansw 3 года назад

Funnily enough, I have been claying my car today, also with BH clay lol

@antonyharrison6809 3 года назад

Hi Jon, just getting in to the whole detailing scene and building my repertoire of products and things, a quick question, how often would you clay bar a car? And also decon? Every wash or once a month? Loving the videos and content learning a lot thanks! 👍😁

@serenahansen2394 3 года назад

Nowhere near that frequently. It depends on the amount of contamination but probably once a year followed by a very light finishing polish on a DA to take out any scratches you just put in and keep the paintwork fresh. You could use a chemical fallout remover like Korrosol every few months to help keep the deposits to a minimum in a contactless fashion.

@antonyharrison6809 3 года назад

@@serenahansen2394 thanks very much for the reply much appreciated 👍

@piratezippy 3 года назад

should be know as C-Day from now on. As posted in group, BH is only clay i use. and you dont need claylube. just water. as for the difference john, soft for regular cleaned cars, and cold day claying, ie winter. medium use for 1st claying and summer. regular for very heavy soiled cars and overspray. Also john, i cut my clay in 1/4 and use 1/4 a car, and even better cost effectiveness!

@d4tjr165 3 года назад

Where is the mitt from you used ?

@hosssubaru3262 3 года назад

Ahhh sorry ye never got any burgers and chips 😋 now get on wit the work haha 😂 messing great video as always

@MrQuattrodave Год назад

Awesome 👍

@ImBarryScottCSS 3 года назад

The Haka 🤣

@marcmcilveen8796 3 года назад

Like the approach!! How do you deal with the same contaminate, say on the rear window?

@jaaphoogendijk671 3 года назад

You can use both fall out removers (chem decon) and claybars (mech decon) on windows.

@marcmcilveen8796 3 года назад

@@jaaphoogendijk671 thanks!!

@Pickfordr100 3 года назад

I have always rinced after a tar removal may have to try just buffing off

@ryanwilliams6526 3 года назад

Is that a Rover 100 in your picture?

@punkuk1979 3 года назад

3 questions I have not Googled or have but need an definitive answer. My car is wrapped on the hood and leading edges and has a crematic coating over both the wrap and paint 1) Can you clay the crematic coated wrap (is it worth claying) Using Bilt Hamber Clay 2) Can you clay the crematic coated paint (is it worth claying) If I do use Bilt Hamber Clay 3) Can you recommend a Bilt Hamber polish/wax for the crematic coated wrap and paint one product for both scenario's (It it worth polishing/waxing) Bonus question 4) Will polishing buffing a crematic coated wrap (using some relevant Bilt Hamber product) improve the gloss/Shine/Finish of the wrap Thanks M8 4-0 WTG England

@deertr4841 3 года назад

Nice videos man! I would like you to talk about the Autoscrub one or the carpro Polyshave block one! Have you tried these?

@ForensicDetailing 3 года назад

Ive tried enough to know clay bar is better for me. the more contamination you have the better clay is.

@deertr4841 3 года назад

@@ForensicDetailing allright John! Thanks :)

@Vyker 3 года назад

My BH black clay has been unused for 5 years. I'm going to try it out.... I'll let you know if it's gone off or perfect still.

@Seb7535_pafc 3 года назад

Should be fine as long as its been unopened and the paper wrapping is in place.

@simonb6306 3 года назад

Pop the bit your using in a bit of warm water. Mix it up and see how it goes.

@konstantine381 Год назад

need those ONR dilution ratios : )

@helipeek2736 Год назад

It may be little, it may be red, it’s not located in one of three specific areas of Yorkshire, it’s not the subject of a Brothers Grimm book and so IT’S NOT A HOOD!

@ChrisLee-fw5he 3 года назад

You should organise a little car met so we can all tip up and you can inspect our work 😂

@TelaKalleoy 3 года назад

My way to do claying is foam again after the wash. And start claying. Auto Glym foaming car wash is slipery when wet...:D

@88Hawk2 3 года назад

There's a good way to show how a panel is contaminated - drag your hand on the surface, and listen for that 'sandy' sound. Then compare it to a clayed surface. You can literally hear the difference.

@Tim955w 3 года назад

Would you still recommend this process if you hand polish - will hand polishing remove any marks made by claying?

@ForensicDetailing 3 года назад

can mask and remove most fine clay marring but its damn hard work and somethings you can get heavy marring.

@robbiedavison2901 2 года назад

How do I determine which type of grade of clay that I may need to do my car? The car can look very clean for a 14 year old car after a wash and is gun metal grey. I'm new to clay barring and can't work out if a heavy clay bar would be too aggressive or if I would be wasting my time using a fine bar? Any advice would be hugely appreciated. Thanks.

@ForensicDetailing 2 года назад

Go white

@bigdweeb7829 3 года назад

Subscribed... Top man 👍

@ForensicDetailing 3 года назад

Awesome, thank you!

@bigdweeb7829 3 года назад

@@ForensicDetailing appreciate your knowledge and detailed reviews. Helps us newbies a lot.. 😀

@reallyisitjustme 3 года назад

If the iron particles are falling out, won't they get dragged about if you use a mitt to spread the remover?

@ForensicDetailing 3 года назад

some iron will get pulled into the mitt and dragged about... but look at the dirty clay bar.. you grind all that stuff over the surface when you clay... so gently going over some tiny fragments of fallout you cant even see is not a problem.

@Anoymus985 Месяц назад

Whats the white clay bar jhon u dint mention it isit soft or medium the white one..

@ForensicDetailing Месяц назад

Soft m8

@nipunpatel5395 3 года назад

Forget the ONR just use water, especially with Bilt Hamber clay bars

@jawad5867 3 года назад

Is the forensic detailing haka the new intro 😂

@simonbradshaw3708 3 года назад

Don't suppose it was BMW Protect-X that was put on the car by the dealer? Will the decontamination process remove the coating if it's been put on top of the fall out? Do you then have to polish and put a new ceramic coating or wax on the car?

@ForensicDetailing 3 года назад

I think it was although they said guard-x decon would not remove this stuff no. it was hard curing rock hard and there were footprints off it everywhere.. all over the glass, the edges of the paintwork where it had not been buffed. who-ever installed it did a woefull job for whatever reason. totally shocking. they applied it on a thick layer of tar as well.

@jasonkenny6432 3 года назад

You mentioned ‘marring’ so does claying a car risk damaging the paint or is it like polishing where your cutting it back?

@ForensicDetailing 3 года назад

it scratches the paint yes mate. you have to polishing out the fine scratches.. you wont see the scratches unless you have the right light.

@kieronryan5324 3 года назад

Hey John Bcz guys at dealerships are not Valatta just clean car badly

@howell_124spider 2 года назад

Just watched this as I need to decontaminate my car. Quick question, can you reuse the clay bar again after one use? Do you have to clean it or wash it?

@ForensicDetailing 2 года назад

Typically yes

@vikaskarthik9559 3 года назад

How long can we use a used clay bar? Can we use it again for next detail?

@ketillundsrensen6167 3 года назад

Cut out the bat in 5-8pieces. How meny cars you can do. That depends on the cars. After I don my Mercedes E270 estate I could easy use the clay for at least on more car. But I had also cleaned my car alot. After my friends Skoda I could put it in the bin because that car was nasty. So it's hard to say. But with the prices on Bilt Hamber it really doesn't matter if it hold 1 or 8cars.

@dougwilliams44 Год назад

Anyone advise, I have a 1969 Plymouth roadrunner, "Base Clear" painted some 4-5 years ago.. Has a "Sandy" dusty feel in the roof. WHAT size or "Grit"/harshness clay to begin with? Ut's quite contaminated for certain. Thanks all!

@ForensicDetailing Год назад

Just use the white BH clay m8

@Xodia91 2 года назад

Hi mate I brought a 4 year old car with approx 20k miles The paint feels rough to the touch so I want to clay it I didn't know which clay to get so I bought built hamper medium. But after watching this video I'm thinking should have got soft. Is there a big difference? Will the marring be visible? Also on the instructions it says you can just use water. Is that sufficient in your opinion or will I have to buy ONR?

@ForensicDetailing 2 года назад

Marring will be vidable under heavy duty lighting after car is dry. Get a little da polisher to whizz over it with finish polish

@mcalpine663 3 года назад

Quick question! Can I use a fall out remover / tar remover and NOT claybar the car then hand polish and wax the car if I don’t have the time to claybar and machine polish? Thanks for the great content btw always look forward to a new video. Only just found out about your channels in the last month. 👍

@ForensicDetailing 3 года назад

chemical decon, makes physical decon easier it does not replace it. short answer is not really callum mate. but some people will wash they car.. dry it and spray it with panel wipe or like BH cleanser fluid (which is a bit like a tar and glue) and then wax it. what I cant tell typing this post is how much contamination is on your car.

@mcalpine663 3 года назад

@@ForensicDetailing thanks for ur reply and time looks like Iv got a long weekend too come! Lol Iv gone and bought the da8 from in2detailing but scared to use it on my new (to me) car. I struggle with time as I have a 2 year old and no garage to store the car. Thought I could maybe polish/wax the car without causing any damage to the paintwork without claybaring. Thanks again for your time. Top videos! :-)

@trevortitlestad 3 года назад

Bit off topic, but what wash mitt were you using with the fall out remover, as it looked really good and perfect hand size?

@ForensicDetailing 3 года назад

theses ones mate. Bargain Amazon Wash mitts amzn.to/2Wp2xFg

@trevortitlestad 3 года назад

You sir, are a legend

@jackrodgers8970 3 года назад

Do you have to polish after clay bar or can you just apply a sealant ?

@ForensicDetailing 3 года назад

you should really polish it mate.

@SteveLBMK 3 года назад

Very informative, Jon. I've just bought a sunset orange 320i (F, 2018). Question re the colour: "mint" or "minging"?? I love it, but perhaps it is an acquired taste!

@chasbald1964 3 года назад

Hi Jon, great watching your channel - Just wanted to ask if you have ever done a video on best citrus cleaners i.e. for engine bays etc. Maybe a good idea for your next vid :-) Keep up the great work and happy cleaning :-)

@ForensicDetailing 3 года назад

can just use surfex HD charles. but really the best citrus is the one with the most amount of D-limonene in it that lets your water it down.

@SpartanKyuubi 3 года назад

Can you guide me to a video of the results of polishing a car without coating it? I’m having a hard time convincing my clients that Decon is a necessary step.

@ForensicDetailing 3 года назад

you cant polish off contamination mate. this car had been "detailed" without being polished. And the sealed sat on top of black spots and tar.. it was a complete mess.

@steverabbits 3 года назад

I've wondered Jon if ONR actually does leave residue being as it's got polymers in I think? I actually do use ONR myself as clay lube but I've often wondered about this issue

@ForensicDetailing 3 года назад

Optimum said it leaves nothing behind but if that residue dries I can see it so it must be leaving something behind :) but it seems to wipe away.

@JoshuaLynn 2 года назад

@@ForensicDetailing OPT Talks about this. Yes, if ONR dries on the surface it will leave what they call "Polymer spots" instead of water spots. They wipe away easily usually. If not, a spot more of ONR reactivates the residue for easy wipe-off. This is what makes ONR such a great drying aide. After rinsing off a hand wash a spray down of ONR at 127:1 right away allows for good lubrication of the drying towel and an increased time to dry since it will prevent water spots. The same is true if using ONR as a clay lube at a higher ratio. If it dries, it is easy to sprits a little and wipe off.