Clay Slab Roller Update

Подписаться 1,2 млн

Просмотров 195 тыс.

50% 1

My Premier Project Plans: paskmakes.com/...
My Free Plans: paskmakes.com/...
I built this Clay Slab Roller a few months ago, since then it has had a workout and the roller has failed. The roller was made of plywood disks and with the amount of pressure put on the middle of the roller one of glue lines has given way. It was actually one of the original plywood glue lines that has failed. There is a video on my channel showing the roller build.
The fix was straight forward. After re-gluing the roller I turned it down a little with the original jig I used to make the roller, and then glued it into a piece of PVC pipe. I'm confident this will work now as the pipe and plywood together make for a very rigid roller. If I have to do any more updates I will video it to keep any interested viewers up to date.
I don't see any more issues though - but you never know!
I had some sound issues, too much sibilance that I struggled to eliminate in post production. I use a Canon 5D mk2 and just added a Rode shotgun mic so if anyone has any advice on settings I would appreciate it.
This wasn't the most exciting video but if anyone was to build a similar machine to this then they would need a heads up on the roller issue! I hope you enjoy the video anyway and as always I'm happy to answer any questions.
If you would like to support this channel you can do so here
/ paskmakes
You can also help me out by purchasing one of my shirts, you can find them here paskmakes.thre...
Check out my new website
paskmakes.com/
Check out my Instagram to see more of my work / paskmakes
Also you can check out my photography at my website (nothing to do with making but you may be interested in what I do) www.neilpaskinp...
My email can be found in the about section of this channel.
For real mail,
Pask Makes
P.O BOX 768
Yandina
Queensland
4561
Australia

Хобби

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@1963uspl 5 лет назад

Hey Neil Only just came across this on the channel today. Your height adjustment is exactly what I need for the rebuild of my drum sander. Right now I adjust the bed up and down, much easier to adjust the roller. Thanks for the idea and the inspirational channel. David

@HariharaprasadVellala 3 года назад

Thank you. I was searching for making a roller to make flakes with medium dough. I was thinking of two rollers and you have showed with a single roller. Thank you for the beautiful idea.

@ianvicedomini2648 3 года назад

Problem solved. Brilliant work Neil and a great video mate 👍🏼👍🏼

@demofactory 6 лет назад

PVC was a great idea. Could be applied to drum sanders and other tools that need true straight drum rollers. Really enjoying your channel. Thanks for posting friend!!!

@MakeThings 6 лет назад

Ahh PVC, how I so love you. Great little update, especially since watching the first one. Good job Neil.

@PaskMakes 6 лет назад

Thanks Rob! :)

@DugMcClure 5 лет назад

Not a fail, only a chance to play that song again. Well done!

@SparrowStockwell 2 месяца назад

Looks like a good fix!

@cuinabistro6100 4 года назад

Hi from Argentina... It is a wonderfull idea to roll puff pastry!

@sebuteo 6 лет назад

Excellent solution. Looks good to.

@phantomKE 6 лет назад

This is just brilliant.

@ibrahimkocaalioglu 5 месяцев назад

Much better 👍

@mariogustavoalvarez3970 4 года назад

thanks a lot men!

@BernhardHofmann 7 лет назад

I'm watching your videos back to back and loving every minute. Thank you for sharing the amazing things you make, and taking the time to make the videos so entertaining to watch. You are my new Jimmy Diresta. :)

@PaskMakes 7 лет назад

Thank you very much Bernhard! High praise indeed! ;)

@designfordeen 7 лет назад

I wanna see if I can use this technique to make a machine that will die cut, emboss and print! I am very hopeful! Thank you for sharing your knowledge. May Allah reward you for your your generosity.

@jelenadinic5541 6 лет назад

Great! Thanks for sharing!

@carlao549 Год назад

i think this is a great idea for pizza doughs and breads and some savory

@asvarien 7 лет назад

Wow that router jig is super clever!

@PaskMakes 7 лет назад

Thank you! :) I saw something similar a few years ago - I really don't remember where but I logged it in the grey matter.

@araujocuevas 5 лет назад

Gracias Amigo excelente video.

@valerielevitt3016 3 года назад

Brilliant!

@hebrewhammer1000 6 лет назад

Thank you for sharing! Great video, I learned a lot.

@nickbrutanna9973 2 года назад

Seems as though the original could have used a thicker bar at the center, too, so it wouldn't have deflected as much. It's probably doing it less, but still doing it.

@hello_8u8 Год назад

好厲害家裡的壓麵機是上進下出式我也想要一台平坦式的壓麵糰機看過影片比較有概念了謝謝分享

@diegomontes9365 4 года назад

your videos are amazing! congrats!

@brainfornothing 5 лет назад

Thanks for sharing !

@cvoisineaddis 7 лет назад

Very clever way of making a roller. I wonder if it could be used for intaglio or block printing.

@PaskMakes 7 лет назад

Thanks! I think I got the idea from a video I saw long ago - really not sure where (something similar at least). I couldn't say whether it would work for block printing, but maybe though!

@DavidTheDave 6 лет назад

I'm thinking the same thing.

@sebuteo 6 лет назад

Me to!

@jmickart 7 лет назад

If it comes back again try 10 GA. aluminum pipe over a ply-stack core. Great design!

@paulangeli9710 7 лет назад

You could roll bread dough into a pizza! Excellent video BTW.

@PaskMakes 7 лет назад

Thank you Paul! Pizza dough with bits of clay on it - yum! ;)

@paulangeli9710 7 лет назад

Pask Makes ha ha! I look forward to more of your videos!

@a.v.k.2852 6 лет назад

Yes, it is the perfect dough roller.

@maitemasis7986 Год назад

Hi! It’s awesome :) And really good solution. Where can I buy the plans for making one myself? :) I search for them in your website and didn’t find them :(

@zombyfellow 4 года назад

Why not fill the pvc with concrete or reinforced concrete? it will hold the shape better than a wood core and much easier to make

@robertbrunston5406 7 лет назад

Thank you.

@PaskMakes 7 лет назад

No worries Robert! :)

@bait2me 3 года назад

I have a feeling that concrete filled pvc pipe would have been an option too

@KaumbaMwanamwambwa 3 года назад

Would you be willing to share the design plans? I'd love to make one as a dough sheeter.

@MrCrazypupil 7 лет назад

Отлично! Если я правильно понимаю, это приспособление для изготовления керамической плитки. Можете снять весь процесс, от замеса глины до обжига? ... В любом случае, спасибо за ваши видео и мотивацию к работе руками.

@PaskMakes 7 лет назад

Спасибо! Yes I believe that is what it is for - making tiles. I don't have any experience in clay I just built the machine.

@nocko111 Год назад

I didn't find the plans of the slab roller on your web site. Aren't you buying?

@GetHandsDirty 7 лет назад

Great solution! Also great to hear you speaking :D

@PaskMakes 7 лет назад

Thanks! I found it a little easier to talk to the camera this time - shame the audio was a little poor at the start though. I need to figure out the best settings for my new mic!

@GetHandsDirty 7 лет назад

I didn't pay too much attention when I watched it first because I was going after the words but now that I gave it a second listen I can hear some hissing/static noise. What is your mic?

@PaskMakes 7 лет назад

It's a Rode Videomic (shotgun), I haven't had chance to figure it out properly yet. I think, if I remember rightly I put the volume up in camera when I was talking as the first recording seemed to come out low in volume, even though I was only a couple of meters away from the camera. I will work it out - I just need to spend some time with it.

@GetHandsDirty 7 лет назад

Humm... I have the Videomic Pro and it has a +20dB boost button. You can turn the volume in the camera completely down, with just one volume step and the mic will capture everything nicer with the +20dB. This way there is much less static noise than when recording at 0dB level at the mic and half way in the camera settings. The problem I guess is the sound board of the camera that might not be great. Just professional expensive DSLR's have good sound boards... But anyway, maybe your mic doesn't have that +20dB button but you can still improve the quality sound by getting the mic closer to the source. You can use some random tripod and get a way to attach the correct screw for the mic and position the tripod closer to you without interfering with the image. And get a high quality sound extension cable with the little male and female jacks (or go wireless but that might be too expensive for your case ahah).

@PaskMakes 7 лет назад

Mine doesn't have the +20dB button, I decided to go for the intermediate version of this mic thinking it would be good for my needs but should have probably gone for the pro version. I will try it out some more and if I don't get any better results I will try an extension cable. Thanks for your help :)

@clydebalcom8252 5 лет назад

That should be a permanent fix. If not, then probably thick wall pipe is the next step.

@maestroamonathan4279 4 года назад

your design can be used as a dough sheeter

@williambirdwell1633 7 лет назад

i think if you used a thicker shaft you might not of had such a deflection in the drum. other than that it is a great job! Keep doing what you are doing, its GREAT!!

@PaskMakes 7 лет назад

Thank you William! Although a thicker shaft would've helped I believe it would still flex unless I went with something substantially thick. I think this solution worked out well in the end - I just didn't realise quite how much pressure went on to the middle of the roller when I built it. :)

@shamielapeters7122 4 года назад

Need so a contraption to roll nd laminate pastry dough.... Same concept i think 🤔

@shannonc.4257 Год назад

Why not use a metal pipe?

@JoeGP 7 лет назад

so you reckon that pvc pipe will stop it from breaking again ? i kinda don't, try an iron pipe next time it fails

@PaskMakes 7 лет назад

There is no way it will break again. The mass of the plywood roller fits that snuggly there is nowhere for the pipe to flex. For the pipe to break it needs to be able to bend to a certain point - which now it can't. ;)

@designfordeen 7 лет назад

I also saw that a maker used a PVC pipe and filled it up with quick-dry cement to make it strong. This is what I wanna do too because this is easier for me.