Cleaning a Lookah Seahorse Pro Plus, quick and easy. 

@@DanielKulka that’s a great method!! I like holding out for edibles

Thank you for noticing 😅 it definitely adds to the affect

So handy and super disposable 😂

I cut the ends off a q tip also works perfect

Thank you! I agree. Alcohol with the glass warm cuts through the stuff so quick!

Right! Works perfect and there’s plenty around, usually

Got a noodle fully stuck in it😐

@@Cryptic420. Can you use a tooth pick or something similar to push the noodle out?

@@Cryptic420. another noodle, or like mentioned a toothpick. They usually seem to be the perfect size as well.

The spaghetti definitely just helped me

Totally welcome and glad to help! I’ve got some more ideas that I missed on this one, and I’m thinking about doing another video. Gonna do a giveaway too! A backup Seahorse is great too

Another way to loosen the tube is to heat it slightly. It’ll break up the bond holding it.

Thanks for the input! Glad to help

Take it off the Seahorse, soak it in 90% isopropyl alcohol for four or more hours, dry it when you pull it, put it back on the charged device and burn it at max power a couple rounds. Sometimes the coil just needs replaced as well.

It got saved! I save mine up and cook a batch of treats with it.

Thanks! Something simple I thought of when cleaning before. I might have to look into these brushes though! If they’re slim enough then that’s the way to go. Lookah brand brushes are a little steep. The long one they sell is great, and I think it’s ridiculous they only pack the short one in the pro plus..

I use pipe cleaners. The real ones with the wires in the bristles.

@@chuckowen5938 I thought I got a good brand of pipe cleaner, it left bristles that I had to clean out. What brand do you use?

@@Marleyttyl “Dill’s”. Dipped in alcohol and twisting between my fingers as I feed it in. I like your spaghetti noodle trick. The sticks from incense work well too.

@@chuckowen5938 thanks! I might try some some soon! I used Zen brand and it was not the way to go.

😂 I agree. I should’ve put a slight warning to it. If you’re gonna use this though, you definitely need some tools and tricks to make things quicker. Relatively, it is very quick compared to something like a rig.

The reality is you can just chuck all the parts into an iso bath for 10 minutes and then run it through heat cycles until it stops putting out vapor. Done.

@@678rwhp the quick way to explain it! 😂🤘i think sometimes the coils come weak when new as well. Not often, but sometimes I’ll get one that just doesn’t work like it should.

@Marleyttyl same here. They are so expensive. But I've yet to find a better device for concentrate. I have all the huni badgers and they are way too hot.

@@678rwhp the ceramic coils from Lookah get crazy high temps going too, I don’t like it. Lookah is superb for their price range, all around. I only have Lookah pieces, a rig, and some similar priced devices that I’ve tried.

Thanks for check it out and letting me know! I’ve got a few videos on the Seahorse, there’s helpful bits all over.

Thanks a bunch!!! If you have a head shop near, check with them. They’re $40 a pack from Lookah, but you can find em cheaper online. Make sure to get the Type V (5) www.lookah.com/vaporizers/dab-pen-and-wax-pen/lookah-seahorse-coil.html

I just ordered some from Jvapes. $33 for four, identical to the ones that come with the unit.

@@chuckowen5938 that’s a good price, saves a couple dollars. I buy singles for about $9

@@Marleyttyl I got my seahorse pro plus about three months ago, love it so much I got my wife her own for Christmas. I just came across your videos last night, and what a help! My method of cleaning is almost identical to yours. The 91% alcohol… twisting the paper towel and soaking it about half way… I didn’t think to use the spaghetti, but I had the stick form of incense at hand. I agree 100% that the brush provided is too short. I also had no knowledge that the longer version even existed, but the Dill’s pipe cleaners I got (from an ACE hardware store) work just as well and are disposable. They’re a little more flexible than the brush, but if it’s soaked it can be worked through the hole easy enough. I had no idea you could soak the tips in alcohol though, so I did learn that. 😁 Your video on basic instruction on how to use the device though, was extremely helpful. I’d always used the traditional nectar collector with a torch, so I had been pretty much going straight in with it and ultimately I was getting a lot of product up inside where the coils are. I got a lot of smoke! But after watching your video, I gave it a cleaning (it was coming due anyway) and tried the angled method and tapping with the ceramic and it’s been far cleaner and every bit as effective. I did always tap, but now I know to protect the opening from actually engaging the product. Thank you for all of that!

@@chuckowen5938 you are totally welcome!!! I appreciate the appreciation so much! I made these in hopes of helping people use their devices better, and you have helped to confirm that it’s working❤️ I was stoked when I found out about soaking the coils to stretch the life of em. I called four people back to back, I think 😂 Having two of them around is always a great thing too, in case yours goes dead. If you ever come across something with the device that I haven’t covered, hit me up and I’ll try to work through it and make a video too if needed. Thanks for watching and also for letting me know that the videos help🤘❤️

I agree and have tried to let it burn longer. When I have a new coil it seems to be easy to clear it completely, then it tapers off fairly quick.

@@Marleyttyl sometimes if I know I didn’t clear it I’ll run a lighter off quickly and then blow it out through the end

@@Hu1ud thanks for the tips!! When I get a new coil I am going to try to keep it cleaner. I let it build up alot for the moment, figuring it’d make the video better 😂

@@Hu1ud so you can keep it white and good for a while? I’m trying to learn and taking in all the hints and tips. I do good with it, but know there’s plenty of room for improvement.

The color of it doesn't matter. I never let mine get so dirty that 3 heat cycles on white won't clear all the smoke. You might also be dabbing bunk concentrate of some kind. BHO nastiness. You can also soak the V tips in alcohol just let it dry and run it through a few heat cycles after soak.

Liability would be the first thought, they don’t want to be liable for a method that might lessen the performance of your coil. Another is to get you to buy more coils faster. I think this isn’t a bad choice because of smoke quality, but it’s still great with an older coil too. I got lost reading and then doing life, or I would’ve responded yesterday, but I read they use crushed quartz. I’m not sure yet the correlation, but ISO didn’t work for them. I’m not sure their cleaning method or which coil tips the poster were referring to either. ISO worked for me, but if the coil is too old it just needs replaced

@@Marleyttyl fair point. I appreciate the perspective! Thanks!

@@tfriggink314 totally welcome! I have had no issues using ISO though, and it definitely helps break up the buildup from what I’ve tested.

@@janeoles4500 I agree, but you can just push another noodle through. Both are good options🤘

@@vettechhippie9373 yup! They had gold, rainbow, and tie dye for the Pro Plus model. They’ve not released and limited editions of the new King though

Thank you for watching! Glad to help

I’m not sure which tips you’re talking about. Are they Lookah brand coils?

Yes

@@JustinBug81 I would do any of the Seahorse tips like that. It just helps to break up the worst stuck on parts

That’s good too! Toothpicks are perfect for this. The spaghetti noodle helps alot, even when you just get buildup in the little tube.

oo and then let it dry for a bit do not smoke the acetone plz

Talking about a rapid clean situation! How long do you need to let it dry? The speed sounds nice, especially with the tips

🤣 it was left to build up for the video, bro. If you ain’t getting your shit close to this dirty, then you might need to smoke more🤣 It was about two weeks to let it build, for video spectacle. Once the device is towards the end of its life, or if it’s been dropped, this will happen on a regular basis because the voltage isn’t up to par to burn everything properly. This gold one was about halfway through its life in the video, and I got a new red one last week 🤘

@@donktheclown I think it’s bc diamonds don’t vaporize as easy as regular waxes

@@Marleyttyl I've solved millions problems in my long life but I wouldn't have thought of frikkin spaghetti. LOL

@@donktheclown highly disposable, and near perfect diameter. The thought was worth holding onto 😂

Totally welcome! Glad to help

I have tried that, and try to remember to still. I’ve seen some people’s devices look way clean and know it’s been used alot. I have different people hitting mine often, so it’s a little harder to regulate how it’s hit all the time. Also this was a longer buildup for video effect, before cleaning

@@Marleyttyl im at a gram a day and its still not thay gooey at 35 a gram it seems waste full.....something is going on for sure tell people to draw slower and easier maybe that will save product

@@hellobnice I do about that as well in a day. I feel like any time I draw slower on it, it’ll puddle in the tip and cause issues soon anyways. I am all for the suggestions and thank you for the input! The reclaim doesn’t get wasted, as I like to make edibles sometimes. Reclaim from diamonds is wicked strong.

Push another one through or use the brush that came with it. It should be easy to clear out the back

@@user-yu4ts1tw6v there’s not enough out of these to do much with, plus it’s more burnt than usual. Some folks do it though! Not all reclaim is like the Seahorse puts out, and it’s ready to go for edibles

Is bro talking about the same torch that weakens glass? Bro knows these are weak glass surely….