Тёмный

cleaning heads on hard drive that clicks 

HDD Recovery Services
Подписаться 140 тыс.
Просмотров 88 тыс.
50% 1

for data recovery call: 855.366.4232
or request your service here: www.hddrecovery.ca/contact-us/
This hard drive arrived opened, and as usual, this adds more issues to the data recovery process. During the initial inspection, we noticed fairly large deposits of contamination on disk surfaces that most likely made their way into the drive during DIY attempt to recover data. In the last year or so, we actively started cleaning heads on hard drives that click, as opposed to the basic swap. Original heads if brought back to life can perform as good as new, and it avoids the need for a donor (which can be expensive if the hard drive is rare). During the detailed inspection, we discovered some permanent platter damage on 2 out of 4 surfaces that could jeopardize success of potential partial recovery. The head assembly was degreased and cleaned with 99.9% alcohol. To give this drive a standing chance at getting some data back from it, 2 out of 4 heads were decapitated to eliminate the drag and further platter dust accumulation.
To be continued with Hot-Swap procedure
if you want to ship your failed device to us for data recovery and free evaluation, simply fill out this form: www.hddrecovery.ca/contact-us/
and send your drive boxed with bubble wrap to this address:
HDD Recovery Services
391 Bank St, Suite 201
Ottawa, ON
K2P 1Y3
Canada
Updated 2019 my gear for soldering:
Green inspection light amzn.to/2DFJoYu
Platter extractor: bit.ly/2YhQD2y
Momentary foot pedal switch amzn.to/2OSqjZF
Vacuum pump amzn.to/364XWxa
Cleanroom wipes: amzn.to/2ZLj49G
Programmer amzn.to/2DRjL7a
Quick pogo pin adapter for eepROM amzn.to/33TYVyO
Microscope: amzn.to/2rqWcwr
Vacuum chip pickup tool: amzn.to/2tNCSxc
Multimeter: amzn.to/2EHKAxO
Microscope camera 21mp 60fps 1080P: amzn.to/2Rb5cUq
JBC precision soldering iron and tweezers: amzn.to/33MACm8
Hot air station: amzn.to/2K7Mztk
Infrared preheater: amzn.to/2rYCH1c
Flux dispenser: amzn.to/2spLw4D
BEST Flux: amzn.to/2mXJd1b
Wick: amzn.to/2mNr0Xh
Solder: amzn.to/2mtyC0a
Solder paste for BGA reballing: amzn.to/2LrKQCi
NAND BGA rebelling stencil amzn.to/33Oq9a5
Gloves: amzn.to/2mbHWDI
Fume Extractor (mine is no longer available but this is the new version of the same unit) : amzn.to/2mNCmL7
Gear for filming:
small camera: amzn.to/2mNw51T
big camera: amzn.to/2Ficg9o
Lens on big camera:amzn.to/2Cx3fGw
this video: • 3 best data recovery h...

Наука

Опубликовано:

 

30 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 174   
@geoffcarr5157
@geoffcarr5157 4 года назад
In other words its all about the 0's and 1's. If you don't open your drive at home, data recovery it will cost $$$. Peeking inside changes the 0's and 1's and now recovery looks more like $$$$. LOL.
@hddrecoveryservices
@hddrecoveryservices 4 года назад
Lol
@Tome4kkkk
@Tome4kkkk 3 года назад
Two days ago when my main data drive went titsup I panicked for a moment and I was this close from buying TWO donor drivers 10 minutes after the hiatus. Then I cooled down...
@rosephoenix4634
@rosephoenix4634 3 года назад
It looks like that this hard drive is very easy but what about a hard drive it is much smaller well the iPod could it be possible to remove the CD of the older hard drive and remove the city and sweatshirt that to get a new hard drive cover and remove the new hard drive CD and put it the old one CD into the new hard drive and could it work and if you do know that other person that lived in New York City find of a person who knows how to switch to CD hard drive please leave a comment and then I will find a person or the address I will be happy
@gblargg
@gblargg 3 года назад
@@Tome4kkkk Just restore from your backup.
@tonyjablonski7433
@tonyjablonski7433 3 года назад
Excellent demonstration of expert techniques to fix/clean faulty disk drive heads by disassembly in a clean environment. Brought back memories of replacing and aligning heads on damaged big server disks many years ago. Those days we had to manually tweak repaired drive heads using an oscilloscope to obtain best dibit/tribit waveform patterns to optimise data retrieval signal amplitudes for error-free data transfers to/from the disk. Nice job.
@marcofigueroa7131
@marcofigueroa7131 4 года назад
Hey man great videos. Happy new year. Waiting fot the PC-3000 Flash review :)
@polestar696
@polestar696 4 года назад
I think this channel is great. Find the work fascinating, not that I know what half the things are. He describes what he is doing and goes into great detail the way to do it.
@hddrecoveryservices
@hddrecoveryservices 4 года назад
thank you!
@AngelGarrote
@AngelGarrote 4 года назад
Great info and tips. I see many questions about platter alignment and have the same question about it. I don't see any reply's to this or some other videos with the same questions. Would be great to see one video dedicated to platter alignment. It will help followers of the channel and will also help you answer all those questions once and for all.
@frasercorrance
@frasercorrance 2 года назад
Nice work and great attention to detail.
@naami2004
@naami2004 4 года назад
Thank you for video, Wish you the best.
@cwitmer
@cwitmer 4 года назад
Great video of a very skilled craftsman. As mentioned in other comments, could you elaborate on what you did to keep the platters aligned? Or is it something you simply didn't have to care about at this stage as it will be dealt with in the hot-swap video? A video about cleaning platters would be much appreciated as well. Thanks for sharing your professionalism.
@patrickm.5363
@patrickm.5363 4 года назад
Really like your vids on how you engage your troubleshooting and fixing skills, while explaining it all. Keep it up! Question: I work in the semi-conductor industry and for cleaning we also use 99IPA, but if it can't be cleaned with IPA we use ultra-pure acetone. Have you ever tried that on the heads or would that not be possible due to the head-material?
@hddrecoveryservices
@hddrecoveryservices 4 года назад
Yes, I have tried it. It works great too
@AGCbloglines
@AGCbloglines 4 года назад
Very nice tutorial sir thanks for sharing your knowledge here...
@kennener8446
@kennener8446 4 года назад
Would love to see a video on platter decontamination.
@2000ViperGTSsubscribe
@2000ViperGTSsubscribe 2 года назад
Start with 40 grit, then a 200 grit, buff with Turtle Wax until the shine is back and good to go.
@wombatau
@wombatau 10 месяцев назад
@@2000ViperGTSsubscribehahaha
@invalidhost2
@invalidhost2 3 года назад
Best video on RU-vid ✌🏽
@cocobongo268
@cocobongo268 4 года назад
Hi Bro, amazing content... great skills and technique... happy new year :)
@hddrecoveryservices
@hddrecoveryservices 4 года назад
Thanks
@nilomyki
@nilomyki 4 года назад
@@hddrecoveryservices Is it that you work with different microscopes for different repairs/inspections? Also, what's your minimum working height you use and what these microscopes offer?
@sergejpopov1646
@sergejpopov1646 4 года назад
Пока смотрел, руки вспотели) Жаль с инглишем у меня пока не особо. Хотя твой мне гораздо понятнее. Спасибо, что не тараторишь и говоришь чётко и внятно.:)
@38911bytefree
@38911bytefree 4 года назад
Killer shots. Nice job man. Waiting for the sequel. What could had happen. Also, I have a question that probably you mentioned. when you extract the platter you don care of the aligment of one respect the other. This wont screw the drive, or tools have gone far that it is not longer needed and you can dump just the raw magnetic data from platters and the use a tool to reassemble the platter data into one drive again ?. Cheers.
@adlerdabreo4782
@adlerdabreo4782 4 года назад
Nice to see the cleanup professionally done. Just a quick question. I had opened up a hard drive, and while fixing it back, I have lost the orientation of the platter. How do I verify the correct orientation. I mean, if I insert the disk upside down, will it still work? Also, is there a way to repair the heads as I do not have any similar hardrive in the same family. My harddrive is Seagate 500 GB
@plaskor
@plaskor 4 года назад
Love your videos. As you move platters around is there a need to index (or keep them aligned) or does the tool you use do that? Keep up with the great videos.
@simonstergaard
@simonstergaard 4 года назад
I would also like to know this... but it seems not to be the case...
@mason.elmore
@mason.elmore 4 года назад
I see some black marks that he lines up when puts the platters back in the case. It doesn't seem like that would be accurate enough to line them back up by sight, though. I'm wondering if those four divots mate with the platter on top--"locking" them in place.
@mason.elmore
@mason.elmore 4 года назад
He answers this question at the end of this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-W0uRPoK9nJg.html
@mkilptrick
@mkilptrick 4 года назад
Yes. Could you use a fine tip pen to mark on the edges of the platters? Would that be too coarse?
@nezaralmubarak2235
@nezaralmubarak2235 4 года назад
Great video my friend Would you please send purchase link for used tool of washing heads?
@pmplatinumman9612
@pmplatinumman9612 3 года назад
Where do you get required tools to do head cleaning and swapping?
@NoferTrunions
@NoferTrunions 2 года назад
You mentioned buffing. Does that remove the protruding burrs associated with scratches? If the protruding high points could be "knocked down" to be level with the proper surface of the platter, could a head be used to recover data elsewhere on the platter? I'm surprised ultrasonic cleaning was ineffective. I would expect 40khz cleaning frequencies would damage the micro sized features (they definitely kill inkjet print heads) and that higher frequencies would be used perhaps as high as 90khz or even higher.
@bezerker
@bezerker 4 года назад
This type of job (hdd "service") is my dream...but I have one big problem. Skin issue...I have psoriasis and I would contaminate every harddrive on which I would work :( But with youtube I can meet my dreams at least virtually :D Good job buddy!
@nilomyki
@nilomyki 4 года назад
Is it that you work with different microscopes for different repairs/inspections? Also, what's your minimum working height you use and what these microscopes offer?
@mrDoctorWho0
@mrDoctorWho0 4 года назад
Hey! I really like your videos. I have a bunch of semi-dead HDDs which I want to recover myself one day. Keep doing the great job! A little recommendation: when filming on 6D Mark II, try using 60 FPS mode. It has higher bitrate and video looks much cleaner. You can then convert it to 24 or 25 FPS.
@Dreamlgider
@Dreamlgider 4 года назад
I always thought that disk allignment was hyper critical. (Someone told me that way back) Was it critical back in the day and why would it not be today? Best regards.
@duhaithang4859
@duhaithang4859 2 года назад
What solution do you use to clean the surface of the hard drive's disk?
@Myth_62
@Myth_62 4 года назад
Its a great day when you post videos. In fact you inspired me and I ordered my first microscope (AmScope) and other equipment so I can start to learn hands on. Thanks again for the great content.
@hddrecoveryservices
@hddrecoveryservices 4 года назад
That's awesome dude!
@blub646
@blub646 4 года назад
Me too 😀!
@packratswhatif.3990
@packratswhatif.3990 3 года назад
Do not the disks need to be aligned with one another (synced) when putting back together or does the mpu take care of that ?
@postaovidiu
@postaovidiu 10 месяцев назад
Hi, nice job with fine explanations! But I am interested how did you re-align the platens?
@hddrecoveryservices
@hddrecoveryservices 10 месяцев назад
This kinda of things we will post on Patreon in future
@metalfuryskulls
@metalfuryskulls Год назад
Great videos man, enjoy watching the precision with how you work. I have a couple of old drives that I'm going to play with. The tool you use to keep the heads apart; does it need to be a super accurate distance? - I've seen people do similar just using little pads.
@hddrecoveryservices
@hddrecoveryservices Год назад
Heads need to be opened enough to clear the edge of the parking ramp.
@metalfuryskulls
@metalfuryskulls Год назад
@@hddrecoveryservices thanks 👍
@filmfiklmtin
@filmfiklmtin 2 месяца назад
I cleaned the hard disk with a tissue and cleaning liquid. Did this damage the hard disk? Or not? It basically does not work and makes a sound. I wanted to transfer the disc to another healthy hard disk to save the data.
@mb5058
@mb5058 3 года назад
Q: are the platters aligned relative to each other? If you take the platters out, how do get them to realign when you put them back in?
@The_Real_Chris
@The_Real_Chris 3 года назад
You can’t...either this was a demonstration on a drive that would never see service again, or he was only going to pull data off the lower platter. When removing platter stacks, you need to lock them together to maintain orientation. Once lost, it’s impossible to get back.
@andresbudihardja
@andresbudihardja 2 года назад
to swap platter WD 3.5" at center of platter there is circle with 6 screws and 2 of that 6 not able to unscrew
@rodrigovazquez1874
@rodrigovazquez1874 3 года назад
Nice work. Wish I had your tools and skills. Is it possible to swap heads from a 500gb seagate to a 1tb from the same brand?
@hddrecoveryservices
@hddrecoveryservices 3 года назад
In some case it would be possible
@farazuaf
@farazuaf Год назад
Sir, if we remove platters and heads ,cleans them, is it necessary to place platters back in there original alignment. Or we can place in and position Thanks
@megapro1725
@megapro1725 4 года назад
Why you did not answer HEPA filtering device price?
@blub646
@blub646 4 года назад
Where can i learn data Recovery?
@moonman19
@moonman19 Год назад
how did you aligned?
@ravindrasrinath
@ravindrasrinath 3 года назад
Can you realign platters??
@BlueRice
@BlueRice 6 месяцев назад
what if the drive is missing pcb board? i remember i took the board out and tried swapping before. years later its maybe missing and or incorrect one. i just have to dig up my stash to look for the drive
@SharonDigitalVideos
@SharonDigitalVideos 3 года назад
My seagate 500 GB HD head oscillates on top of the platter few times when powered up and then platter stops rotating. It doesn't read anything, computer does not recognize the drive at all. Any fix for it to get the data out? The head rests on the platter when power is off. Please help with suggestions to recover data.
@chipete1
@chipete1 2 года назад
What do you use to clean a platters
@Brandonhung95
@Brandonhung95 4 года назад
How would you clean the platter if someone has already contaminated it with a smudged fingerprint or something like that?
@hddrecoveryservices
@hddrecoveryservices 4 года назад
Absolutely, theses disks had to be cleaned up before resetting
@circuitlabindia
@circuitlabindia 2 года назад
Horizontal laminar air flow good or vericale laminar air flow ?
@Eddygeek18
@Eddygeek18 4 года назад
Hey me again, i'd love to see how the disks are decontaminated and how to modify the head assembly to remove heads. I'd also like to know about the posibility of read a disk with scratches on it whether it is very difficult or even possible. I have 2 drives here 1 with contanimination and it takes ages to detect on my pc. I opened it up and noticed some fluff on the top disk so i blew it off in a clean hood and tried again. After that i heard a horrible scratch sound so cut the power straight away. I then couldn't figure out what caused the scratching noise so powered it up again and it the noise had gone but still wouldn't detect. The 2nd drive i have the disk has quite a few scratches on the top surface and only 1 head as it's an old 8GB one. I'd love to know if there was a way to get a partial recovery from it as before it "got scratched" i had purchased a donar drive for it to try and repair. Again i'm learning so i have been messing up alot and i scratch them and destroy head assembleys like crazy.
@hddrecoveryservices
@hddrecoveryservices 4 года назад
:) you asking for a recipe to secret sauce my friend.
@Eddygeek18
@Eddygeek18 4 года назад
@@hddrecoveryservices Ah, guess i'll have to use some broken ones to test and find out what works. I evenm tried washing up liquid and warm water with a completly trashed one just to see if it worked lol. It did seem to work but the colour went strange so i'm guessing it stripped the magnetic coating or did something strange to it
@josephdragojevich7041
@josephdragojevich7041 3 года назад
can you not fill in scratches with some form of clear epoxy under a vacuum? sort of how like windshields are fixed but on a much smaller scale? and then polish it all down?
@hddrecoveryservices
@hddrecoveryservices 3 года назад
I've heard stories of something alike, but I would believe it when I see it
@muhammadnurazlansaadon1504
@muhammadnurazlansaadon1504 3 года назад
Awesome.... Cleaning using a paintbrush....
@scottshaffer1074
@scottshaffer1074 2 года назад
is it possible to take the head bundle from a good drive of same model and replace it with the bad heads in the bad drive?
@hddrecoveryservices
@hddrecoveryservices 2 года назад
yes
@rolandongjr3514
@rolandongjr3514 2 года назад
what exactly look like tip of the head.. i think mine is broken
@ciberkatperu5000
@ciberkatperu5000 3 года назад
Done puedo adquirir esas heramientas gracias saludos de peru
@dtiydr
@dtiydr 3 года назад
That marking on the head looks typical of something that have smeared.
@Nick-ui9dr
@Nick-ui9dr 5 месяцев назад
Look what I found... I jus opened one old damaged hard drive and there is no top head on it... I mean I dunno where is go? ... dint find anything in there... and platters seems alright btw and nicely spining... but head assembly kinda trying few times then going to parking stage... Maybe cause there is no head 0 or whatever if thats what it was looking at on init....smile
@GetGood5
@GetGood5 3 года назад
Awesome :)
@saidhassan1051
@saidhassan1051 2 года назад
I have hard disk clicking and not working How can I contact you to get your service
@m.s.6545
@m.s.6545 4 года назад
Did you ever drop a screw on the surface of a HDD Disk ? :-)
@Drottninggatan2017
@Drottninggatan2017 4 года назад
Or a screwdriver?
@demianxldc
@demianxldc 4 года назад
@@Drottninggatan2017 or a neodymium magnet
@morto360
@morto360 4 года назад
@@demianxldc or another harddrive...
@lhcsern6974
@lhcsern6974 4 года назад
@@Drottninggatan2017 hahahahaha
@saigathambhoomi3046
@saigathambhoomi3046 3 года назад
Hi, you do Data recovery service with physical damage? Where are you? Website?
@hddrecoveryservices
@hddrecoveryservices 3 года назад
It's all in description
@okkrom
@okkrom 4 года назад
Today I found out that apparently I am into hdd recovery!
@hddrecoveryservices
@hddrecoveryservices 4 года назад
Hahaha awesome
@parkerzeras2818
@parkerzeras2818 2 года назад
Can i ask just clean a heads can make hdd can read and write normal again ? My hdd problem just heads,before i use hdd regenerator for repair bad sector is normal after use it 2times my hdd cannot read and write again..
@Chriva
@Chriva 4 года назад
No end result? Excellent video nonetheless :)
@hddrecoveryservices
@hddrecoveryservices 4 года назад
Still working on it dude
@Chriva
@Chriva 4 года назад
@@hddrecoveryservices Geeezus. It's one of those jobs? I feel ya, man :/
@therealb888
@therealb888 4 года назад
@@hddrecoveryservices yay u finally added clean room wipes to the description XD
@Astinsan
@Astinsan 3 года назад
The device you use to park and lift the heads from the drive platters.. is that a 3d printed tool?
@hddrecoveryservices
@hddrecoveryservices 3 года назад
No, it's CNC out of aluminum
@Astinsan
@Astinsan 3 года назад
@@hddrecoveryservices sorry I keep asking ya questions.. I do recovery on a lot of things and am looking to expand my understanding. I don’t do it to compete. It’s just easy stuff now but tablet related recovery. I only have toyed with hard discs. I know the basics. Most of the recoveries I’ve done on them is when the heads slam and stick to the drive. Use a positive filtered box I open the drive and gently lift the heads off the drive and bring them over to the plastic parking zone. Isopropyl clean the heads and just rinse everything without a brush or applicator. 90% successful recoveries. The ones that are mangled or the filter is full of magnetic media dust I close back up
@francislong5114
@francislong5114 4 года назад
Is there technology just to scan the disk "out of the box" sort of like a cd player?
@hddrecoveryservices
@hddrecoveryservices 4 года назад
no :)
@kooky112
@kooky112 4 года назад
Not impossible to have made but, nobody has ever made one. If I was good at making stuff like that I would've made one for myself by now because I have a very good understanding of how hard drives work.
@francislong5114
@francislong5114 4 года назад
Thanks for the replies. I am pretty sure tech will exist to read the data another way. I am also aware that solid state will difenenty replace these "old fashioned" hard drives.. in due time.. think about the solid state drive also serving as RAM.
@RainManFights
@RainManFights 4 года назад
Why not head swap? Is it because of the scratch after the parking ramp?
@hddrecoveryservices
@hddrecoveryservices 4 года назад
if original heads can work, it would be nice to bring them back. Our stock is not unlimited for those hard drives, and here is what a donor drive costs: www.donordrives.com/western-digital-1tb-wd10tmvw-11zsms1-dcm-hhmtjhnn-usb-2-5-hard-drive.html
@mr.tech_ceo869
@mr.tech_ceo869 3 года назад
Would changing the heads make the hard-drive work or you have to do the testing after swapping them 🤔 thanks tho if u can help
@hddrecoveryservices
@hddrecoveryservices 3 года назад
It will never work reliably. But it will work long enough to get data back (if done right)
@mr.tech_ceo869
@mr.tech_ceo869 3 года назад
@@hddrecoveryservices so if I swap i have a chance to turn the device on on and get the data this why. Note without sector testing on the hdd
@SlyerFox666
@SlyerFox666 4 года назад
Careful putting electronics in ultrasonic baths if crystals etc are fitted.
@OyeCreative
@OyeCreative 4 года назад
Please help my hard drive unallocated not initialized how to recover my data
@Myth_62
@Myth_62 4 года назад
Send it to him. His info is in description.
@justlaz1444
@justlaz1444 4 года назад
Oh i remember times when i was ussing hard drives. They hated me
@reyabesamis1965
@reyabesamis1965 Год назад
Bro does the plater rotates all the time once the computer boots or only if it is accessed?
@hddrecoveryservices
@hddrecoveryservices Год назад
All platters are bolted down with a washer, so they spin together
@reyabesamis1965
@reyabesamis1965 Год назад
@@hddrecoveryservices thanks for the reply bro, but i mean does the hard disk spins all the time or they stop spinning when they are not in use?
@megapro1725
@megapro1725 Год назад
Does this cleaning even help with never opened drives? Or there's nothing besides replacing the heads?
@hddrecoveryservices
@hddrecoveryservices Год назад
Cleaning works for all types of heads as long as they are not dead
@megapro1725
@megapro1725 Год назад
@@hddrecoveryservices Thanks, I wanted to try it for recovering not so important data without donor
@jimsurette6914
@jimsurette6914 2 года назад
I didn't see how the heads are supposed to fit into the holder/positioner at the tips. Mine has 4 heads or levels and I don't know how they are supposed to be positioned in that holder to align them for reading the disc.
@hddrecoveryservices
@hddrecoveryservices 2 года назад
There is only one way, and that's how they are from the factory
@jimsurette6914
@jimsurette6914 2 года назад
I agree but there is no video or picture of how the factory set them that is what my comment is
@hddrecoveryservices
@hddrecoveryservices 2 года назад
There is a parking ramp for each head to rest on its like a V shape
@wonderman7885
@wonderman7885 4 года назад
why you did not use a clean room or box ?
@hddrecoveryservices
@hddrecoveryservices 4 года назад
All of the work is done inside of the laminar flow work bench. Mine is 6 feet wide so you don't see it in the shot
@TickyTack23
@TickyTack23 4 года назад
I'd be curious to know more about platter positioning. I know way back in DIY videos they describe using scotch tape to keep the platters aligned. But I'm curious to know more details of what kind of tolerances are we dealing with. How much offset can you have before the drive will freak out? What are your techniques for keeping platters aligned? Is it possible to realign platters without knowing their original position? I think an in-depth video, with trials and examples of platters aligned correctly, and platters misaligned would also be very informative.
@ekon01cz
@ekon01cz 4 года назад
In some older video, he was marking platters with marker.
@TickyTack23
@TickyTack23 4 года назад
@@ekon01cz yeah I noticed the marks on a number of videos, which suggests the tolerances give you a fairly wide margin of error for such a precious piece of mechanics. It would be interesting to know more about the limitations, and potentially a case scenario of a person who's placed the platters in the wrong orientation, along with it's indicators and effects.
@mandeepsingh-to7mx
@mandeepsingh-to7mx 4 года назад
Can anybody help me? My wd 2tb loaded with 1.5 tb f my personal data giving me an issue with copying files. I was just using it flawlessly and just within 5 minutes, it stopped responding, not showing my pics and loading while opening any folder. I tried to copy a folder it got stuck and came down to 0 bytes. Now the drives sometimes get detected sometimes not, if it gets shows the folder then its very slow, won't copy any files to my pc. No recovery tool even able to scan.chdsk showed an error.wd diagnosed show read disk error. I the disk management it shows the drive(healthy partition). crystal disk info software shows some reallocation sectors and "caution".I just hear a click sound after a few intervals of time. not able to understand if its hardware issue or software. Kindly give ur opinion.
@dktechnicalguru3556
@dktechnicalguru3556 Месяц назад
Plz tell me best microscope for head inspections
@hddrecoveryservices
@hddrecoveryservices Месяц назад
I use Meiji EMZ-8TR
@dktechnicalguru3556
@dktechnicalguru3556 Месяц назад
@@hddrecoveryservices 45x i am plan to buy 67x microsope....
@usmanraza7484
@usmanraza7484 4 года назад
Make a video on platter cleaning.
@hddrecoveryservices
@hddrecoveryservices 4 года назад
No, not yet
@ebenezerfaithfellowshipchu5191
@ebenezerfaithfellowshipchu5191 4 года назад
I need hard disk tools kit
@hddrecoveryservices
@hddrecoveryservices 4 года назад
No idea. There are so many... And we don't sell them
@smc3453
@smc3453 Год назад
I have a damaged head in my hdd, can you replace the head for me? thank you
@hddrecoveryservices
@hddrecoveryservices Год назад
Yes for 1200USD if it has not been opened yet
@smc3453
@smc3453 Год назад
@@hddrecoveryservices yeah Im sorry but that is ridiculous
@martianari6490
@martianari6490 3 года назад
Sir plz help me....my hard disk is crashed. I want to change my platter from old hard disk drive into new Hard disk ..... Help me plz, model WD10JPCX (WD). What types of things , screws, I need. I have ordered same model hard disk already, I will get that within 5-6 days.
@ravidhas2099
@ravidhas2099 2 года назад
Which liquid use to head clinging
@hddrecoveryservices
@hddrecoveryservices 2 года назад
IPA is good
@avamnepohui7260
@avamnepohui7260 4 года назад
Сильно сомневаюсь, что с жесткого диска в таком состоянии, возможно восстановить данные.
@hddrecoveryservices
@hddrecoveryservices 4 года назад
Посмотрим, нулевая поверхность читает служебку щас. Если сниму критичные модули то под hotswap'ом то точно заведётся. Всё дату поднять не получится но процентов 40% возможно достану. 40% это не 0% :)
@avamnepohui7260
@avamnepohui7260 4 года назад
@@hddrecoveryservices Могу только пожелать удачи.
@VillageTechTree
@VillageTechTree 4 года назад
Hai Bro, My 1TB WD Blue Laptop HDD Not Getting Booted. So I opened my Hard Drive and the plotter not started to move from outside to centre point of disk. I need to take Backup of my HDD. Can I use working Seagate 1TB Same RPM Laptop HDD to Recover my data (Just Replacing the Memory Disk into Seagate HDD)? Or I need same WD Blue Only? Please Reply
@danielemalagoli2751
@danielemalagoli2751 4 года назад
By now you have done a little too much alone and you will certainly have caused more problems to your HDD. These kinds of situations are what DRs want to avoid as much as possible, i'm sorry to say that but is the true. I can answer to you that you can't swap heads or any other part from a certain manufactered drive to another manufactered drive (as you mentioned from seagate to WD), also is need to match particular stuffs as part of DCM code, manufactered country, production date (or very close to patient), head map, rom micro-code and microjogs (close as much as possible to patient). No possible to have success without proper knowledge, instruments, experience. Also, powering on a drive without his cover is a very bad idea.
@VillageTechTree
@VillageTechTree 4 года назад
@@danielemalagoli2751 Thank You So Much for your Reply and Information. What will be the next way to Recover the data from that Hard Drive. Please Support.
@danielemalagoli2751
@danielemalagoli2751 4 года назад
​@@VillageTechTree Do you really care about your data? If yes then you should send your hdd to a professional DR, you might send it to Erkin. As you have opened the cover, platters need to be cleaned and most likely heads need to be swapped by searching a proper donor by matching those parametes that i've mentioned above. Without tools and "know how" you can't find a proper donor. Also, heads might have created scratches on platter surface due to dust, head moving without the cover etc...
@VillageTechTree
@VillageTechTree 4 года назад
@@danielemalagoli2751 Ok... Thank You For your Valuable Reply. Now I am only having the Tools to Open ( To Opne the Cover and Head, Platters) and Re Assemble the Drive.
@ebenezerfaithfellowshipchu5191
@ebenezerfaithfellowshipchu5191 4 года назад
And what will be cost
@XXLCOCKTAIL
@XXLCOCKTAIL 3 года назад
Something over 1200$ and up 😱
@mohak7269
@mohak7269 3 года назад
Hello do you provide courses ??
@hddrecoveryservices
@hddrecoveryservices 3 года назад
at this point we do not. Maybe in 2021
@mohak7269
@mohak7269 3 года назад
@@hddrecoveryservices let me know please
@waquarahmad4196
@waquarahmad4196 4 года назад
Sir actually hard drive repair Please let me know if you
@jaasmindigitals
@jaasmindigitals 3 года назад
Hi sir my 1TB internal hard drive many hardwares trying to recovery, they can't recover data sir pls help me do you recovery my data?
@ankit3375
@ankit3375 2 года назад
Bhai nic English 😂😂😂😂😂
@hemantjiremalimaliartsphot8264
@hemantjiremalimaliartsphot8264 2 года назад
Want the name..liquid used.
@megapro1725
@megapro1725 Год назад
Ethanol 99%
@johnneybot9542
@johnneybot9542 4 года назад
The voice over the video is a huge amount better then the old way with that crappy music
@vnukchaknorrisa5964
@vnukchaknorrisa5964 4 года назад
Какой жидкостью он протирал головку?
@hddrecoveryservices
@hddrecoveryservices 4 года назад
Спирт технический. 99.9%
@vnukchaknorrisa5964
@vnukchaknorrisa5964 4 года назад
@@hddrecoveryservices Спасибо.
@vnukchaknorrisa5964
@vnukchaknorrisa5964 4 года назад
@@hddrecoveryservices На моём авто установлен датчик массового расхода воздуха. Когда он засоряется от пыли в воздухе он приходит в негодность . В этом датчике установлен кристал , если его протереть спиртом будет от этого толк? Заранее спасибо.
@jaasmindigitals
@jaasmindigitals 3 года назад
Hai brother
@gratzafreenetde
@gratzafreenetde 4 года назад
Russians are the best technicians. They can repair almost everything. I say this as a guy from poland.
@therealb888
@therealb888 4 года назад
he's a ruski?
@gratzafreenetde
@gratzafreenetde 4 года назад
@@therealb888 looking at his super good skills and work i think so.
@D-K-C
@D-K-C 3 года назад
Ъ
@bymasakty
@bymasakty 3 года назад
Zzzz its difficult
@anandhurkrishnan5621
@anandhurkrishnan5621 4 года назад
1st comment 🥰🥰🥰🥰🥰
@blakwolf7486
@blakwolf7486 4 года назад
Wtf i wasted 10 min of my time. Show us if the shit works after that. I disasembled hdds also for fun 15 years ago they never work after you disaseble them....
@angrycatowner
@angrycatowner 4 года назад
Your monolog is the biggest bunch of baloney and hogwash that I have ever heard. It sounds technical and intimidating, but it's pure balogna. And NO, you cannot just take out the platters and play with them, and then put them back in and expect your HD to have any chance of working again, and NO you cannot just rub some alcohol on the heads. THat's just nonsense. You are a great salesman, stick to sales not tech.
@hddrecoveryservices
@hddrecoveryservices 4 года назад
lol, sorry if my hogwash intimidated you. But I am not about to start an argument on how to do my job that I am really good at with someone who has 0 to no knowledge on the subject
Далее
recover data on hard drive with platter damage
21:41
Просмотров 108 тыс.
full rebuild of WD passport to get data recovered
25:02
Едим ЕДУ на ЗАПРАВКАХ 24 Часа !
28:51
When You Get Ran Over By A Car...
00:15
Просмотров 3,4 млн
Ummmm We "HAIR" You!
00:59
Просмотров 14 млн
How a Hard Disk Drive Works
7:23
Просмотров 1,5 млн
Data Recovery: Hard Drive Platter Swap in Our Lab!
36:05
salt water damaged flash drive for data recovery
25:45
Cleanroom Demo of Hard Drive Data Recovery
19:56
Просмотров 191 тыс.
How Long Can SSD Store Data Unpowered? Year 1 Update
9:24
Собери ПК и Получи 10,000₽
1:00
Просмотров 1,8 млн