Cleaning The Sensor On My Panasonic DMC-LX100

Подписаться 17 тыс.

Просмотров 5 тыс.

50% 1

Taking Apart my Panasonic DMC-LX100 to Clean the Sensor Dust. This is a video of me taking the LX100 apart and reassembly. * This is for informational purposes only.** I'm using the ifixit guide from: www.ifixit.com... for reference.
I've previously disassembled the LX100 last year to clear the dust, but another speck of dust appeared recently and I decided to do a recording of the disassembly for reference. **The places that dust can enter the LX100 from what I've seen is the HDMI, USB port door on the side, the battery and SD card compartment and of course the zoom lens. Make sure those areas are clean while using the camera. I would suggest NOT blowing compressed air into the battery compartment. I've also read that there maybe variances between cameras, so only look at this video as a guide-reference. Good luck!

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@unzerozeroun 7 месяцев назад

I followed each step very slowly and was able to clean the sensor of the Leica D-Lux. Could I have done this without your video? No chance, so thanks for sharing!📸

@tedallen9078 3 месяца назад

BRAVO

@misterjaroslav6859 Год назад

I used vibrating massager and vacuum cleaner with bottomless plastic bottle attached. After third attempt with rotation of camera all dust specks were gone :) Camera was with extended lens and without batteries.

@JohnChu Год назад

That's great. I tried it once with an AeroPress Coffee maker and taping around and slowly pulling up the plunger. Unfortunately, I pushed my luck and realized I had no choice to but to take it apart again. This time though, I made sure to clean the lens the best I could. I've also been using weather tape around the HDMI and USB port door.

@misterjaroslav6859 Год назад

@@JohnChu Yeah. Unfortunately, I am shooting in dusty apartments and I have to clean cameras every 3 months. Powerful vacuum, vibration with knocking by any device like electric toothbrush, and rotation of camera solved the problem. I wish I knew it, before purchasing my two cameras...

@СергейМ-с2ь 4 месяца назад

..блин.. что ли тоже разобрать самому..

@faithfuldissenter Год назад

it is an amazing camera, but the sensor dust is disturbing. I have been removing the sensor dust on Light Room.

@gustavoalfonsogarciavergar507 Год назад

your video really helped me...and although i have had to look for the autofocus connector 4 times hehe finally i have had my lumix clean and functioning...thanks a lot..i couldn't have made it without your guidance...cheers from peru

@JohnChu Год назад

That’s great! The first time I did it.. I didn’t get all the dust out and had to take it apart again. I’ve taken it apart a few times now and the rubber grip is not sticking anymore. Have to find rubber cement for cameras. I love the LX100 except for this dust flaw.

@ivanleebarcellos-qq6qd 4 месяца назад

Thanks for this video, I love my LX100 but it has been on the shelf for some time because there is something wrong with the lens , sometimes will not auto focus on the wide end, and sometimes the zoom will not work, there is something wrong and I have no idea of how to solve this as I live in Brazil and couldn't find anyone capable of fixing it

@sattway9 23 дня назад

You may have found out that just taking it apart and replugging in the ribbons will solve your problem. Just have to take it apart.

@MBinDenver Год назад

Thank you for this video - I had to replace the battery/SIM card door, and this video showed me exactly how to get into the camera in order to do that!

@JohnChu Год назад

DIY and saving money for the win!!

@chinenko7741 Год назад

Oh God Oh God I'm so tempted to do this cuz my LX 100 now cant take pictures with no dust above 4.0

@JohnChu Год назад

Personally, I thought it would be harder. Just keep track and organized. The first time I did it, I was annoyed I still had dust and had to take it apart again. The trickiest part is the ribbon cables, you have to make sure they are seated before you lock them back in place. You need some of the nylon spudgy tools from iPhone battery replacements from Amazon.. it makes life easier.

@josh6499 Год назад

Thanks this helped me greatly.

@GrandFew 9 месяцев назад

I just picked up one of these for a song because it has "spots" - hoping I can clean the sensor and have a pristine camera for my effort, thanks for sharing the video I find it very helpful compared to written guides.

@JohnChu 9 месяцев назад

Good stuff! For me, the last time I opened the thing up, I also tried to "seal" some of the gaps in the battery compartment and port doors. I used some clear weather tape. The LX100 could be near perfect except for this dust issue.

@GrandFew 9 месяцев назад

@@JohnChu I opened mine today and it was just full of debris, just using a blower I managed to get the sensor almost perfect, just have one tiny mark at f11 and above left. I'm very happy for now but next time I might try the tape too

@stoufenatz3728 Год назад

thanks a lot !

@meowsefer Год назад

Could you tell me how the ir filter is attached to the sensor? I couldnt quite see from the video. Are there clasps? Thanks this video is great.

@JohnChu Год назад

I never looked into it as my main goal was getting the dust off… but iFixit has a decent photo on step 17. www.ifixit.com/Guide/Disassembling+Panasonic+LUMIX+DMC-LX100/55603

@meowsefer Год назад

@@JohnChu Thanks I'll check it out.

@gabl8a89 5 месяцев назад

Thank you Master Chu i would give this a try as my LX100 has developed dust on its sensor too, very annoying when i shoot slower than F4. With your help my the old LX100 can literally use for enternity now. Will go to a dust free or lesser dust location to complete this project.

@JohnChu 5 месяцев назад

It would be worth doing some "dust proofing" in my opinion when the thing is apart. The battery compartment is not sealed, so dust can enter from there. And the port doors on the right side is also not sealed. I was using some weather tape (removable clear temporary tape) to seal the outside door.

@michaeljgreen15 Год назад

Nice job. How long did it take you for the entire process? Any particular difficult areas I should know about before cleaning my sensor?

@JohnChu Год назад

Only thing to say is to not force anything. Unplugging and replacing the cables are tricky. Use a flashlight and magnifying glass to make sure all the dust is off. It sucks to put the thing back together and still find dust. Be prepared to have to start over again. Accept that dust may still appear at higher f stops/apertures. Good luck, take your time and organize.