Thank you so much you have been great helping I was going to sell my machine could not find a video to help not even close to what you did thanks once again
Am very excited to see this video. I have a cnc machine in my office but av never thought of getting close to know how it works. I would get involved straight. Lot of thanks
Great simple presentation, much appreciated. I purchased a CNC a couple of months and was somewhat intimidated by it. Because of your video I intend to make a start tomorrow,Thank you for inspiring me Jason Regards, Paul
Great video Jason! You’re totally right that most videos regarding CNC’s skip over some of these basic steps! I can’t wait to see you progress through this video series!
You may consider cautioning people about feeds and speeds (not making a recommendation, but a simple warning to spec them to their machine) when setting and choosing bits. Many of the bit manufacturers list suggested specs, but usually, that's for industrial machines and smaller desktop CNC's can't handle them. I wound up doing a full video on the topic for the same reason you did this one.
Man O Man, you covered some of the basic starting areas that I struggle to find help with. I am so grateful you decided to make this video. I’ve been holding off on purchasing a CNC machine due to not knowing what you just covered. again thank you so much.
Thanks so much for making this video! I have been watching CNC videos for the past week and this one has been the most helpful. Thanks for getting me started!
Jason, I just clicked on your video at random and realized that you bought Jay’s CNC. I was also looking at it and apparently you made him an offer prior to mine. Glad to see it went to someone who was making great videos with it! I did finally get an Axiom, I got the AR6 Pro. I do not have a RU-vid channel but have contemplated it. I am retired and enjoying my Axiom too.
This is awesome Jason, I really want to invest in cnc. But I was really intimidated by computers and how it all works. This is a really helpful video. Thanks so much👍
Hello Jason Thank you very much for taking the time to make a tutorial. It's easy for me to undertsand. I recently purchased an Axiom AR8 Pro the same as you! Can't wait to use the machine when it arrives. Looking forwards to more of your videos :D
I plan to dive deeper into CNC stuff this year. Unfortunately, I haven’t been able to spend as much time as I would have liked on the CNC and still have so much to learn.
This Is exacly what Im thinking about. All those videos on YT that says for "absolute beginners". Fu*k them I didn´t understand a thing. Yours was awesome.
dont buy factory machine waste lot money about 4000-6000$ ewery normal men can build own machine and lot better machine DIY in garage less than 1500$ my machine cost about small cnc 40"x40" less than 500$ and big machine 85"x60" less than 1300$
Jason, can you run the path of the cutter without actually cutting to make doubly sure it will not hit the clamps? I plan on getting an Axiom in the new year. Really appreciated this video. More please!
I really appreciate your straightforward approach on this. You really did take some of the scariness out of this for me. Although it will still be awhile before I have the funds and the space to get a CNC, at least you have knocked down one of the barriers. Great job!
You just built up my confidence “tenfold”___. Thank you for this video presentation. Now where to come up with about $5000 to get started on the purchase of a CNC machine and simple laptop good enough to run the programs... Greg
Hi Jason, thanks for the clear explanation. This was great for engraving but what I can't find online is how to make Through cuts without damaging the CNC bed. Could you make a video on how to do this? Thanks!
Great video as usual. Looking forward for the day I would own a CNC. It would’ve been this year if i didn’t purchase the truck 😄. Thank you @bentswoodworking
Hi Bent's...Very good video, well explained. But I have a question I bought a cnc from ebay is 3018 cnc engraving machine. This software is compatible for this mini-engraving machine. Thank you in advance for your answer.
Hi. I hope your still looking at comments. I’ve only just started exploring the why’s and wherefores of cnc wood working. My first question: I have an old laptop with windows XP. Will the program’s needed (I believe there are at least 3) to design, code and operate a CNC machine run on my this laptop?
@@bentswoodworking thanks for the response. I’m past my indecision, only waiting on pay day to order parts. I’m leaning towards Carveco to start ($15 a month). Hard to justify $700 for software this early. I think I’ll have to use my desk top computer to get started. If I can sell something maybe I’ll get a cheap, used laptop from eBay. Thanks again. Wish me luck.
all laptop not can use cnc machine, usb port not real go out 5 volt better use cheap old table computer cost about 20-100$ cheap machine need only paraller port LPT port have, then need buy paraller port breakout board about 10$ motors minimum nema 23 450 OZ woodwork, 30$/pcs, motor drivers all motors about DM554 or DM556 what have motors maximum current, and power supply if 4 motor use 4ampere need power supply minimum 16 ampere supply, not good use laptop all not working and not have paraller port out, windows and USB controller have cheap less than 20$ but mach3 software ok but windows not ok worst OS not safe and not realtime use,lot problems. safe have only linuxcnc but need LPT/paraller port out.
Thanks for all your efforts it’s appreciated. I just purchased my third Cnc (axiom ar6 pro v5) and should arrive end of this week👍. Im using VCarve pro and Aspire. My question is do you have in depth tutorials using the pendent? Thanks Darrell
Just press Tool Set. You don't have to "get it close" first, by pushing down on the Z button. Did you see how slow the Tool Set actually moves? You have plenty of time to move the puck to where you want it.
I have been cutting MoP inlays for headstock and fretboards by hand. My inlays are tiny...50mm wide x 2mm thick. I would like to start using a CNC: can you recommend an appropriate machine?
So where I am struggling is with creating the file for the machine. I am going to be getting a cnc within the next few weeks and its creating the file for the machine that I just can't seem to get a handle on. This video helped a lot. Just need to see if that software is compatible with the onefinity machine.
Hi, I think we cannot see the pop-up windows because when doing the record, you probably selected a specific window or app instead of recording the entire desktop. You can "fix" this by recording a selected area. Before starting the recording, ensure no pop-up will appear in the middle of the session 😁. Regarding CNC, I would like to buy one machine to cut "big" laminated MDF boards, like 4x8. Do you have any recommendations? This is the most challenging part for someone without experience in CNC. For sure, I'll find from 5k to 30ks, right?
I am a fan of both Mark Lindsay and Garrett Fromme. They don't teach specific machines as you are doing; but, teach the Vectric software IN DETAIL. Without the CAD/CAM software the CNC is an expensive paper weight.
I have a pro am not perfect with it by any means. That being said try this. Put your puck under bit press menu on/off. I also screwed down 3/4 press board to my work table. Leveled it with 1-1/4 bit there is a program for that. I did that so when I cut through a project I didn't cut work table and I screw down projects.
Most videos skip this kind of information because it is almost always a little different from machine to machine. For example, The machines at our makerspace don't use a tool puck so we teach how to set the tool height visually and by feeler gauge and we don't use a remote (our control software is a computer console). I also advise beginners to set their starting point at the center of their carve and adjust the the material or the origin point. This allows them to reuse sections of G-code to reproduce their carve on different sections of sheet material.
all machine can add tool height sensor tool and zeroing bit height automatic, not need manual and visual doing anything and not accurate and not good do it visual.
Jason Thank you for your beginning tutorial! I found it really helpful to be able to see something from A-Z. I am now a subscriber and look forward to your next tutorial.
Hi there, i still found parts of this confusing and not explained. E.g where did you put that tool set puck? The video didn't show where you placed it. Where does it need to be? When the cnc bit touches the puck, l where is it setting the origin? Onnthe surface of the puck in the centre of the puck? Or the base of the puck? Does it subtract the height of the puck? So confused. Is the puck just for z-axis height?
"If you're somebody who got a cnc or has made your own and has no idea where to start" you are my type of people 🤗 Im building my own, just purchased all the metal, no idea if i can do it... but i somehow know i'll succeed, if not by dumb luck.
@@bentswoodworking Not gonna lie, im a little concerned about accuracy. have since welded up the frame and legs. Everything still looks square and straight but its still a bit worrying.
ewery normal men can build own machine, simple easy job, linuxcnc, stepper motors minimum need nema 23 450 OZ 3-4A motors, DM 554 motor drvers, SBR or MGN rails, how size you need workspace, aircool real spindle, NOT router noise too lot, ball screws or Trapezoid screws, some aluminium profile or DIY welding metal sguare tube, simple job do. save many thousand dollar money not buy ready and lot worst machine.
hello i have a cnc and i am using it to build cabinets. i designed a kitchen on a program generated a g code but the machine is only working in a very small section in a corner. it thinks its moving around the whole table but its not. ever run into a problem like that?
i has fighting many day try understand how i use this tool height system to my new DIY linuxcnc machine but not understand how make button to display and then how make makro or subfile and were, make this tool height measure and zeroing, and then go to workpiece corner can start right height Z my first pocket carving/milling to wood.
help I made a good 3 axis cnc mill/router, it has a mach3 usb interface, i can manually jog it with mach3. what free design/drawing program can i use and then convert to gcode for mach3 to run the machine? only want 2.5 axis to cut simple parts cutting or up and not cutting. example a 5cmx5cm square with rounded corners with a 3mm hole in each corner.