CNC Dovetail Drawers - Real Time setup - Mozaik Software Tutorials 

Yes I did

As time went on it became evident the quality of the plywood makes all the difference also the material thickness settings, tool heights and z0 needs to be bang on as well. Sorry it did not work out for you man.

If you are using solid maple for your Dovetails, you're better off to build them with a cnc dovetailing machine or manual. Mozaik is really only good for baltic birch dovetails. I did learn recently that not all Baltic plywood is created equal and spending a bit more on quality Baltic will increase the final result 10 fold.

I should note that mozaik has preset vortex bits preset in the cnc tooling library with feeds and speeds that's what we used

@@hillcrestcabinetswhat grade and thickness of Baltic birch you’re using ?

At that point we did use filler but found that the quality of the plywood makes a massive difference. Once we changes to a higher grade plywood no longer needed filler.

@@hillcrestcabinets thank you for all your videos. They have been very helpful to me. Appreciate your time.

First time ever actually. Works quite well!

@@hillcrestcabinets would there be a way to get that exact file? I tried setting it up on my end and for some reason the undermount cut out in the back was a weird shape and wasn’t being cut out squared

Shopsabre 4896