This video demonstrates how to use the Coin Doming Tool Set by Legacy Brand Coin Ring Tools
Our new coin doming tool set for making coins into domes for coin bell tops, coin buttons and coin beads. Domes all sizes of coins using your existing 17 degree / 25 degree / Swedish Wrap Die sets.
Please measure the outside diameter of the dies you are intending to use. There is some variance in the OD of all brands of dies. This doming kit is machined with close tolerances to fit dies that are 44mm / 1.75" inches. If your dies are larger than 44.1 mm, please contact me via convo so I can customize a doming lid for you.
Three different sets available. Please read descriptions below and select the set you want from the drop down menu.
TYPE 1 SET includes:
One centering lid with a one half inch (1/2") deep recess that fits atop all brands of standard 1.75" diameter folding / reduction dies. It also works with Swedish Wrap dies.
Three domed DELRIN forming pins with approximate diameters of 3/4" inch, 5/8" inch and 3/8" inch. These pins are replaceable as needed, so you don't have to buy a whole new doming set.
Three 3D printed ABS spacers to adjust the depth of the punch recess as needed.
One 1" inch long accessory pusher for extended pushing of the domed pins inside Swedish Wrap dies.
TYPE 2 SET includes:
One centering lid with a one half inch (1/2") deep recess that fits atop all brands of standard 1.75" diameter folding / reduction dies. It also works with Swedish Wrap dies.
Three domed STEEL forming pins with approximate diameters of 3/4" inch, 5/8" inch and 3/8" inch. Steel pins are made from heat treated 4140 tool steel.
Three 3D printed ABS spacers to adjust the depth of the punch recess as needed.
One 1" inch long accessory pusher for extended pushing of the domed pins inside Swedish Wrap dies.
TYPE 3 SET includes:
One centering lid with a one half inch (1/2") deep recess that fits atop all brands of standard 1.75" diameter folding / reduction dies. It also works with Swedish Wrap dies.
Three domed STEEL forming pins and Three DELRIN forming pins with approximate diameters of 3/4" inch, 5/8" inch and 3/8" inch.
Three 3D printed ABS spacers to adjust the depth of the punch recess as needed.
One 1" inch long accessory pusher for extended pushing of the domed pins inside Swedish Wrap dies.
Free Shipping available on the Legacy LLC Site, no minimum purchase required
coinringtoolsl...
Also available on Etsy for International customers
www.etsy.com/l...
Order yours today, and get your dome on...
If you are just looking for replacement doming pins:
Free Shipping available on the Legacy LLC Site, no minimum purchase required
coinringtoolsl...
Also available on Etsy for International customers
www.etsy.com/l...
DIES and COINS IN PICS ARE FOR DEMO ONLY. NOT INCLUDED WITH DOMING KIT.
Legacy Brand Coin Ring Tools are all MADE IN THE USA
Thank you for watching, and happy doming..
26 авг 2024