Тёмный

Column Shuttering | Making Process Practically with Technical | कॉलम का Shutter बोर्ड कैसे बनाते हैं 

Civil Execution
Подписаться 4,3 тыс.
Просмотров 3,3 тыс.
50% 1

Dear Friends,
Good Day,
#civilengineering
#civilengineers
#drawing
#drawingreading
#reading
#engineering
#engineeringdrawing
#engineeringdrawings
#civilexecution
#practical
#practicalknowledge
#site
#civil
#practical
#barbendingschedule
#barbending
#formwork
#scaffolding
#scaffold
#expension
#engineering
#exacavator
#excavation
#piles
#pilecap
#piling
This video is created to easily understand Column box or shuttering for columns is made of plywood sheets or steel sheets fabricated with adequate stiffeners.
The gaps near the shuttered joints should be sealed with plaster or a piece of wood to prevent any leakage of slurry.
Appropriate space is to be provided in the inner face of the shutter and reinforcement by fixing cover blocks of about 40mm.
Ply wood material used for shuttering, should be dimensionally accurate in length, width for slabs and in depth for beams and also give the desired finish to the contact surface. Always, it is advisable to go for waterproofing plywood boards.
Formwork is a shape or mold comprising all supporting arrangements, used to outline and backing the concrete until it attains adequate strength to carry its self-weight. It shall accomplished to carrying all compulsory dead load and live load including its self - weight.
Right angle, Line thread, Tube level, Hammer, Hand saw, Spirit level 2-3 m, Plumb bob, Total station, Shuttering tape, Measuring tape, Chipping tools and Pinch bar. Also in this video described that how we should joint a wooden batten for board making and why to joint the batten vertical with ply.
This video is free of cost and may be very useful for a fresher students who is pursuing in civil engineering courses and just joined as a trainee.
In this video these are the content to understand…
1. Read the drawing carefully.
2. Find out the size of column
3. Arrange the wooden ply and battens.
4. Arrange the tools for using this.
5. Cut the ply on as per required by column size
6. Make the board.
These are the video link to view how many activity and responsibility of engineer at construction site execution.
• civil engineer respons...
• Site knowledge,site ex...
• site execution, manpow...
• shuttering material,re...
• Scaffolding at site,st...
• steel pipe scaffolding...
• truss and steel combin...
• Type of Excavation and...
• How to do Excavation l...
• Concrete pouring equip...
Thank you

Опубликовано:

 

15 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 3   
@shaamaanbeats9323
@shaamaanbeats9323 2 года назад
Bhai maza a gaya
@ajaysharma6280
@ajaysharma6280 Год назад
Sir how to make inner beam side making if beam 400*600mm and slab 150mm by ply .sir side to 450mm ki hogi but ply kitne mm ki cut karege . Plz details main batye . Thanks
@Civilexecution
@Civilexecution Год назад
Already ek video bani Hui hai... Kindly see in playlist..
Далее