Commissioning and Troubleshooting Our New Schenker Watermaker

Подписаться 28 тыс.

Просмотров 7 тыс.

50% 1

Fellow boaters - I'm thrilled to share my latest project with you: MaintenanceROS! Crafted from my experiences aboard Starry Horizons, it's designed to simplify vessel and maintenance management, making life on the water even more enjoyable.
Explore MaintenanceROS.com and enjoy an exclusive 20% discount for the first 6 months using promo code 'outchasingstars'. Seamlessly manage your boat's upkeep - let's embark on this journey together!
*****
After installing our new Schenker Zen100 watermaker, now we have to commission it and try to make water for the first time. We filmed this process to prove that no matter how carefully you plan, some troubleshooting is always required!
Fortunately we had some good technical support and Starry Horizons is one step closer to being a true off grid boat!
================
Affiliate Links
================
Out Chasing Stars is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. We will make a small commission if you click them and make a qualifying purchase. If you have a different purchase in mind, you can also use these storewide links below.
🛒 Amazon: amzn.to/3yhlT1T
🛒 OCS Suggested Products on Amazon: www.amazon.com/shop/outchasin...

Опубликовано:

13 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@douglasrobbie9998 Год назад

Glad you got watermaker to finally work properly. Very complicated, efficient and anything but KISS. Personally prefer a system with more manual control, like increasing pressure using a needle valve.

@OutChasingStars Год назад

Which type of watermaker to go with was a decision I mulled over for a _long_ time. We did really like our manually controlled CruiseRO system but it uses significantly more power than these energy recovery systems. And since our overarching goal during this refit was to get as energy efficient as possible, I decided the additional complexity was worth the trade off. I will also say though that one of the big reasons we went with Schenker is that it has manual overrides for pretty much all the controls so if something does go wrong with the fancy controls, I should still be able to make it work.

@tlowe2502 Год назад

I'm sure glad you found the problem, because you kept after it and figured it out. I was wondering why you weren't using your marriage saver's? Can't wait for the adventures to begin. Thanks guys, stay safe and have some fun.👍🏻👍🏻💕🐾

@OutChasingStars Год назад

At this point, it'd been so long since we'd used the marriage savers during the refit that the batteries were dead. 😆 But it was another scenario that proved just how useful they are!

@elysiumsailing Год назад

I saw that Starlink on the stern, hopefully you plan to talk about that too. As an IT guy I am very curious how it is working, how far offshore it works, and how it is doing in the Bahamas! As always, great video!

@OutChasingStars Год назад

I'm rapidly becoming of the opinion that it's the biggest cruising game changer since GPS. I uploaded this video and am replying to comments from an island where we had zero internet coverage last year. And I couldn't believe that I could stream the World Cup from 600 miles offshore in the Atlantic on the sail down. 😄

@elysiumsailing Год назад

@@OutChasingStars Wow, that is a bold statement! So do you have the portable hardware or the in-motion hardware?

@OutChasingStars Год назад

We have the portable hardware at the moment (Residential service + portability). I do fully expect that additional limits/changes in services will be coming so this year is still a 'testing' year for us.

@HopeOfJoe Год назад

Certainly is a ton of parts to this system. Curious as to why you choose it as it seems rather complicated? Happy all is well and good to see you out on the water again. 😊 ✨ 🌊💨⛵️🏝👙🌞✨

@OutChasingStars Год назад

That's a good question and one I debated a lot given how much we liked our relatively 'simple' old CruiseRO watermaker. And the answer came down to energy efficiency. This Schenker is among the most energy efficient watermakers on the market and with our overall goal to be fully off-grid and powered via solar, energy efficiency was vital. And while there is some more advanced automation with the new setup, it still has manual backups. So if the fancy stuff fails, I can still make it run!

@francismontocchio9910 8 дней назад

Hi! Thanks for your great videos! I have the same water maker as you and I’ve spent the last hour trying to troubleshoot. When I switch on (on/off button) it beeps then after a few seconds I get a long beep and both buttons start flashing. The pump motors don’t start either. Any idea what that could be? Thanks for your help.

@maxx9384 Год назад

I have had the very same watermaker and I am happy with it. What I did not fully understand: why do you add complexity and have a automatic relay for the quality? I have a 3 position (manual) valve where I can route to forward/aft/faucet. I let it run to the faucet in the sink for the first 10 minutes and then to either tank 😀 no wires, no worries. The faucet position lets me fill glass bottles without going through the tank. Additional bonus.

@OutChasingStars Год назад

Figuring out how to install the Schenker in the most efficient way/re-using parts of our previous install was a lot of work! One of my goals for the new install was to be able to control it without having to go up into the locker every time. (It wasn't super fun having to go turn on/shut off the watermaker when it was raining!) I thought long and hard about going with a manual 3-way valve like you have as that is what we had previously. However, the best location I could come up with to mount it for easy access was where we installed the control panel... which is where all our 12v switches are located. So a water leak there could be disastrous! The automatic relay was my compromise. It keeps all the water lines in the locker but lets me control things from inside. It does add some complexity, but if it fails, I can still control it manually so I was okay with the trade-off.

@marc4322 Год назад

Great job! I really like all your Technical video So your tds is adjust to 500 ppm to start filling your water tank, but how lion you get in production in ppm?

@OutChasingStars Год назад

I'm assuming the question is "how low does the ppm get during production"? If so, we're now averaging about 250ppm now that we're down in the Bahamas. But the 'quality' of production water varies significantly depending on where in the world you are and the 'type' of water: salt/brackish/etc.

@harleysoltes Год назад

Do you have any video yet if cleaning and pickling? I would love to have a diagram of the hose and three way valves for cleaning. Our Schengen installed per manual with no places to tap in. Thank you…..great install!

@OutChasingStars Год назад

We've been using the watermaker so regularly, we haven't yet had to pickle/clean it yet. If you want to send us an email at starryhorizons@outchasingstars.com we can share the diagram we made of our install.

@TPLeary Год назад

David, I enjoy your attention to detail. How's the 2:1 main halyard working out?

@OutChasingStars Год назад

Like a dream! No chafing issues at the mast head and the diameter is small enough through all the clutches and blocks that the main is happy to slide right down the track.

@TPLeary Год назад

@@OutChasingStars awesome to hear, enjoy the warmer weather.

@wanabesailer9599 Год назад

Does that 12v watermaker do a self clean cycle when you finished making water or do you have to initiate the cleaning cycle yourself?

@OutChasingStars Год назад

We have the option to set a timer for 1,2 or 3 hours of production. When that timer ends, the unit will do an automatic freshwater flush. But if we choose to just turn the unit on, then we'll need to initiate a freshwater flush ourselves.

@jerryhartley2495 Год назад

I just wanted to ask if Schenker advised the order of the filters. I have my own company that deals with filtration and the order of filtration should be the particulate filters, one or two stepping down in micron efficiency then followed by the carbon filter. Your carbon filter may plug up faster than you want in the order you have and they are more expensive than the particulate filter. I would advise switching the order and using the particulate filter as your “sacrificial pawn”

@OutChasingStars Год назад

Hi Jerry! The particulate filter and the carbon filters are actually on separate water lines. The particulate filter is on the seawater intake side and then the carbon filter is on the fresh water flush side. So for this system, the carbon filter is more for protecting the watermaker membranes from chlorine/chemicals that may be in the fresh water tanks when filling up at a marina. Hope that makes sense!