CONCRETE PILES installation STEP BY STEP.

Подписаться 19 тыс.

Просмотров 29 тыс.

50% 1

Piling step by step. Piling rig, pile bearing capacity test.Construction site #03 "Piling". In today's video I will show you step by step the piling works. You will see the piling rigs at work and pile bearing capacity test.
JOIN the best engineering community 👍👍👍 SUBSCRIBE NOW!!! 👍👍👍
leave the THUMBS UP!!! Follow the LinkedIn page 😁
LinkedIn: / siteng
/ greg-stepien-7346ab183
Subscribe: ru-vid.com?sub_...
👷‍♀️👷‍♂️ EVERY GOOD CIVIL SITE ENGINEER MUST HAVE - watch the VID 👉 • 10 MUST haves for CIVI... - items I use and recommend 😁
SAFETY BOOTS-choose your size ⬇️⬇️
👉 amzn.to/3NfjUCJ
👉 www.screwfix.com/p/dewalt-pho...
TAPE MEASURE ⬇️⬇️
👉 amzn.to/3xQ3cEf
👉 amzn.to/3xZ9ykM
TAPE HOLDER ⬇️⬇️
👉 amzn.to/3NzLDOV
👉 ffx.co.uk/product/Get/Makita-...
CALCULATOR - sometimes you can also find them in Supermarkets half price 😁⬇️⬇️
👉 amzn.to/3u2hHE6
DRAWING FOLDER ⬇️⬇️
👉 amzn.to/3NqYoeA
👉 amzn.to/39OUNZP
NOTEBOOK - get whatever really to take some notes 😁⬇️⬇️
👉 amzn.to/3HQkbLx
PENCIL - 0.7mm - good price, but for this colour 😁⬇️⬇️
👉 amzn.to/3OlvwW3
PENCIL - 2mm ⬇️⬇️
👉 amzn.to/3QHVIff
JOINER'S PENCIL ⬇️⬇️
👉 amzn.to/3xRIaFl
TIPP-EX - these are the best I used ⬇️⬇️
👉 amzn.to/3QNrKGH
PERMANENT MARKERS ⬇️⬇️
👉 amzn.to/3ykpcZv
CHALK LINE ⬇️⬇️
👉 amzn.to/3A0aUOY
👷‍♀️👷‍♂️TRY TO GET THESE ON SITE BEFORE YOU BUY 😁 👇
RETRO TARGETS - Tell your senior engineer, or PM to order these and they will. It’s sometimes the waiting time…⬇️⬇️
👉 amzn.to/3NkSsnh
STRING LINE - These will do. You can always get a one on reel, or with a handle. The thicker the better really, but don’t go crazy of course 😁 ⬇️⬇️
👉 amzn.to/3u08bkB
SURVEY BOOK - They should have these on the site, if not tell them to order 😁 ⬇️⬇️
👉 amzn.to/3HSLGUv
👷‍♀️👷‍♂️FEW EXTRAS I USE TOO 👇
SMALL SPIRIT LEVEL - you can always borrow from a Chippie if needed 😁 ⬇️⬇️
👉 amzn.to/3OEXs79
KNIFE ⬇️⬇️
👉 amzn.to/3HQKUrl
GLASSES - Despite you will get safety glasses, on some sites they’re really low quality and I don’t want to get my sight worse using them. Fortunately it’s a rare situation :)
👉 amzn.to/3nawPeN
👉 amzn.to/3yhMMWM
GLOVES - I got them first on one of the jobs and I use only these from then 😁⬇️⬇️
👉 amzn.to/3bvldjC
#civilengineering #constructionuk #siteengineer

Опубликовано:

16 окт 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 68

@Jamie-fl2im 3 года назад

Excellent thanks for this.

@SITENG 3 года назад

Thanks Jamie, happy you are active here :)

@adamimran862 3 года назад

Very informative video. Great work

@SITENG 3 года назад

Thank you Adam!

@albertocarmonarosell3545 3 года назад

Top class videos my friend! 00:40 uploading to ASite that made me crack up 😂 Keep up the good job!

@SITENG 3 года назад

Very happy you like it Alberto :)

@aliyarbi8283 Год назад

Hi 🙋 i really liked your video, i know that KELLER is really best company in this work, i would like to work there future as a Piling Rig oparator, best wishes from Turkey 🙂

@SITENG Год назад

Happy you like the vid! Yeah, Keller is huge and have great projects. Wish you all the best, chase your dreams and see you in the future on some great project 😁😁

@TheMrasimqureshi 3 года назад

Super video Greg. Great one. What is the difference between the Integrity Pile Test and the Pile Test with the yellow steel bar in it. What happens if the pile fail the Integrity Test. Who orders the concrete for the pile and who checks the quality and specification of the concrete used for the piles. Very good video which is filmed brilliantly as the HD quality is superb. Excellent.

@SITENG 3 года назад

Hi Asim! Bearing capacity test check actual pile capacity to check the discrepancy between reality and design - pile is kept under load and movement is checked. Integrity test checks if the pile has any irregularities in the concrete structure (cracks etc).

@mrmalab8937 2 года назад

The piling company orders the concrete and they do check the quality of the concrete by taking samples typically cubes. hope I answered the concrete part.

@CalumKemptonMusic Год назад

how are you checking verticality and position? We are governed by SPERW 3rd edition: Geometric Tolerances: top of steel: -50mm/+150mm position: = +-75mm verticality 1:75 I suggest total station using cogo arc calculation on the hollow core of the auger. I thought these QA would have been priced in, but they are not. I will be running this past my company next week, but I think there are commercial blockages even though we are responsible for adhering to the piling specification. I did not see anyone doing total station surveys on this video. Checking bored piles with casings verticality and position are a lot more straight forward.

@SITENG Год назад

once it's marked is the rig driver to make sure it goes straight etc. Top of steel is related to the platform level and tolerances you have are enough to go like this although on one job I actually measured the level to tell guys how much to plunge the cage ( that was due to the state of the mat really) Then you do the as built survey on the pile position. The rig creates a pile report about the pile and then the pile integrity test is done on the cut off level and that's about it :)

@CalumKemptonMusic Год назад

@@SITENG There is a inclinometer on the rig, but it only informs you of the verticality or levelness of the rig. The auger is made of 3 sections and generally can't be taken out of the bore once it starts boring. T he piles are 10-12m deep with a 600mm diameter. Our PPL is 67.000m. The mat is a up and down at places. To be cost efficient, we are using the existing tarmac as the piling platform. There are a couple of softspots that have been dug 630mm below the PPL and backfilled with 6F2. I set up the control network for the job and we are setting all of the cages with a laser level. Our rig has it's own software for measuring certain parameters and the workforce have paperwork they fill in also. As I said we are governed by the ICE SPERW standard which means that the piles should be of a verticality of 1:75 - circa 160mm deviation in the horizontal axis at the toe of the pile. The position is to be within 75mm and the steel is to be -50mm/+150mm.

@mohsinmoroney5824 2 года назад

Hi I have been out of practice with the total station for while. Could you put a video up on how to setup and stakeout on site please

@SITENG 2 года назад

Hi! Check my setting out playlist, everything is there 😁😁

@tonnag7588 3 года назад

Hi, Could you be more specific please in setting out by showing how you use EDM. how you stake points, survey land, as build, programmes you using on total station, mark points on the site by spray, drawing, etc. this will be more useful for those who wants to become Setting out Engineer. Thank you

@SITENG 3 года назад

Hi Rido! You can see EDM in Setting out series, unfortunately it's not easy to record while doing setting out. I was thinking about installing go pro on my hard hat, but it won't work on my site. I will try my best to show this though and in my next videos you will see more 'in action' vids.

@tonnag7588 3 года назад

@@SITENGThank you👍

@mrsassybeast 9 месяцев назад

thanks for the video, how to calculate survey record of the first or final casing and complete the excel report for the survey job?

@SITENG 9 месяцев назад

not really sure what exactly do you want to know, but someone should show you what they do within the business

@samadheidari8880 9 месяцев назад

Hi Seting, Thank you for your information. Can you specify the standard method for pile test (bearing capacity)? ASTM or any other references. Thanks

@SITENG 9 месяцев назад

well, standard method is to load the pile and check how it reacts under :)

@sergisergi8497 3 года назад

We appreciate what you do !! Will be more informative if you will show the initial project , how are represented reference points , how do you prepare the drowing for Leica and what are the best way to do setting out for each work on side ... the technology of work is not so hard to find in the project or books..

@SITENG 3 года назад

Hi Sergi, will show this in 1st Construction Drawings video which will be uploaded this month. After that please let me know if you need to know more :)

@Ksawery_K 3 года назад

Czesc, ja mam 15 lat, bede robil GCSE examiny w tym roku. Bardzo lubie inżynieria lądowa. Interesuje mnie strasznie konstrukcja i bym chcial byc kierownikiem budowy. Najlepiej jest wybrac matematyke na A-Level, a wtedy isc na uniwersytet. A kiedy skoncze to co mam zrobic zeby byc kierownikiem budowy? Strasznie fajny video, dziekuje.

@SITENG 3 года назад

Czesc! Super, ze lubisz inzynierie ladowa :) Ja polecam zaczac jako junior inzynier i zobaczyc kilka projektow pracujac jako inzynier, nabrac doswiadczenia i wtedy zaczac jako kierownik budowy. Zycze wszystkiego dobrego i dawaj znac jak moge jakos pomoc :)

@mishkathchowdhury8863 3 года назад

love your videos! ive got an apprenticeship interview coming up for site engineer next week, have you got any tips for what i should say on the interview? anything would help :)

@SITENG 3 года назад

Hi! Just be yourself, show your interest in engineering, be positive and full of energy. Read about the company to know why you want to work for them. Remember this is apprenticeship so you will be learning, show that you want to learn, show enthusiasm :)

@mishkathchowdhury8863 3 года назад

@@SITENG thanks, really appreciate the help, hope all goes well🙏🏽I’m going to talk about the EDM, setting out, levelling etc, hopefully it shows them I’m interested.

@SITENG 3 года назад

Fingers crossed :) Let me know after.

@user-gr6wh7lx2q 7 месяцев назад

tutorial of how to transfer gridlines from lower level to the upper level

@SITENG 7 месяцев назад

that's why you want to be able to set up your EDM on the higher level, so you can set up the grid lines :)

@indranilbhowmick8459 Год назад

Did u do lateral dynamic load test of working piles. Want to know about that test

@SITENG Год назад

no, sorry 😁

@oluwakayodefarotade3760 2 года назад

I have an ongoing site the land is just being reclaimed in a mangrove swamp area piling is needed but it's my first piling job can u help with an extensive video

@SITENG 2 года назад

Hi! Sorry to say, but I can't, especially right now as I am waiting to get YT access back to upload the vids. What do you need to know? I'll try to help you

@yavuzcinar6487 3 года назад

Hi Greg, do they use tremie during pouring concrete down?

@SITENG 3 года назад

Hi Yavuz! These were CFA piles, so simultaneously with the auger withdrawal the concrete is being poured. I am showing the 'drill' on the video where you can see how it works.

@joshua201290 2 года назад

Why the different colour rebar some is brown other looks to be galvanised?

@SITENG 2 года назад

Hi Joshua! They all the same, there are not galvanised as I remember, they only used in some cases, very rarely. The difference you see is the rusty one against 'fresh' ones. Even after few days rebar will start changing colour as the rust starting to get it 😁

@avinashcandance 10 месяцев назад

Why has no drilling mud been used there?

@SITENG 10 месяцев назад

Not sure what you mean by that?

@khalidhashemi1181 2 года назад

hi Greg had a question, I am currently setting out piles and the pins we have is 600MM, it is really hard to get the pins as low as the ones shown in your video. How do you often do it?

@SITENG 2 года назад

Hi Khalid! you need smaller pins, cut yours in 3, 200mm is well enough - and you will save some steel 😉. The pins don't have to be long to keep the position for piles. I was doing piles few times, but last time maybe 3 years ago 😁

@khalidhashemi1181 2 года назад

@@SITENG great thanks for replying. Also what is often the pile tolerance? Thanks Greg appreciate it

@SITENG 2 года назад

This depends on the project really, but it's sometimes even 75mm, so quite a lot :)

@MoBH88 3 года назад

Thanks for the video, I am a BEng civil engineer with 4 years design experience, how can I move to site without any site experience or setting out experience? Most job offers put me down as they always require some setting out experience. Thanks again brother.

@SITENG 3 года назад

Hi Mohamed! You have to try get a job as an assistant/junior engineer first and spend some time on site. In your case it's not going to be long as you have design experience and a degree, so it's only a matter of learning a bit of setting out and see how the work on site is looking. Once you will have even little of site experience look for site engineer position.

@MoBH88 3 года назад

@@SITENG thank you so much for your response! I really appreciate your effort

@unda25 3 года назад

@@MoBH88 if you are in LONDON uk, there is a company called Apex Engineering Services , E16 water front , i work with them, they are paying very less but you are learning