Configure Cisco Access Point using GUI Standalone/Autonomous with WPAv2 Authentication Key

Подписаться 10 тыс.

Просмотров 327 тыс.

50% 1

#Configure_Cisco_AP #Standalone_GUI #IT_Support_People
IT Support People Facebook Page:
/ it_support-peopledeskt...
Link for Other Related Videos:
Configuring Cisco Router to Access Internet through ISP Home router:
• Connect Cisco Router ...
Configure VLAN | Allow VLANs to Access Internet
• Configure VLAN | Allow...
In this video I've shown step by step process How to Configure Cisco AIRONET 3602i Autonomous/Standalone Access Point using GUI with WPAv2 Authentication Key. I've divided the whole process into two parts which are given below:
Part 1: Accessing Cisco Aironet Access Point GUI Web Interface
• Console the Access Point with Putty (default user name and Password: Cisco)
• Resetting to factory Default Settings Using the MODE Button
• Check IP status and Assign a static IP to BVI1 interface with same subnet mask
• Go to Web Browser and type BVI1 interface IP address (keep user name blank and default Password: Cisco)
Part 2: Configuring Aironet Access Point with WPAv2 Authentication in GUI
1. In Easy Setup
Under Network Configuration
--Edit AP hostname, Static IP, Subnet mask and Default Gateway
Under In Radio Configuration
--Create SSID name WLAN_New under Radio 2.4GHz and select Broadcast SSID in Beacon
2. Apply Encryption Modes to AES CCMP
3. Enable WPAv2 and apply WPA Pre-shared Key: to SSID
4. Enable Wireless Radio Interface (Radio0-802.11N2.4GHz/ Radio1-802.11N5GHz) UP
5. Save the configuration
6. Finally check the SSID Wi-Fi connection, Security Key, IP address and browsing through internet
Cover Topic:
How to configure Cisco AP,
How to Configure Standalone Cisco Access Point,
Configure Cisco AIRONET 3602i Autonomous/Standalone Access Point using GUI,
How to Configure Cisco Standalone/Autonomous Access Point using GUI,
Cisco access point configuration step by step GUI,
How to configure standalone Cisco access point from GUI,
How to Configure a Cisco Wireless Access-Point (AP) from GUI,
How to configure standalone Cisco access point from GUI,
WPAv2 Authentication Key, Encryption AES CCMP,
Cisco AP Wireless Radio Interface Radio0-802.11N2.4GHz/ Radio1-802.11N5GHz,
Create Cisco AP SSID GUI, Enable WPAv2 and WPA Pre-shared Key,
cisco 3602i standalone configuration,
Resetting Cisco AP to factory Default Settings Using the MODE Button,
Cisco IOS Configuration Guide for Autonomous Aironet,
cisco autonomous ap configuration example,
how to access cisco ap web interface,
cisco ios configuration guide for autonomous aironet access points,
Cisco Autonomous Wireless Network - Home style configuration,
Configuring the Access Point for the First Time,
SSID on Autonomous AP Configuration Example,
Cisco Autonomous AP - Initial Setup & Open SSID Creation,
Autonomous AP - Initial Setup & Open SSID Creation,
Using the Web-Browser Interface Cisco Aironet 3600 Series,
SSID on Autonomous AP Configuration Example - Cisco,
how to access cisco ap web interface,
how to configure cisco access point without controller,
How do I assign an IP address to a Cisco access point,
How do I access my Cisco wireless access point,
how to configure cisco wireless access point via console,

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 220

@Aarasstudio 3 года назад

Your videos are highly appreciable as it is live in physical cisco devices, very useful and highly recommended for cisco learners. Waiting for all complete series. Thank You.

@itsupportpeople219 3 года назад

Thanks for watching

@stephensugandh9035 2 года назад

Masood bhai you are very clear in what ever you show , and explain. . . I really appreciate it. . . Thank you very much, please keep up you good work. . .

@MrEDGE1984 3 года назад

I appreciate you ground work, most people feel expertise in advance thisgs but they lack basic understanding of networking. Ur efforts are worthy of appreciations.. plz upload more such videos.

@itsupportpeople219 3 года назад

Thanks for watching...

@edenorganics6476 3 года назад

i've really gathered much here, thanks

@sabretd19 3 года назад

Brilliant!!! Easy to follow Instruction... 2.4 & 5G working before video conclusion...Thank You

@itsupportpeople219 3 года назад

Thank for watching

@shiabkhan6680 4 месяца назад

Proud of you my friend. Searching some video on cisco air ap on youtube and suddenly it pops up to my screen.

@roshanmutha2329 Год назад

You explained so nicely man. You showed router and switch physically to understand better. Thankyou. Please teach us more

@rider275 2 года назад

I really enjoyed this video. I have a home lab but no wireless access points. Your video has helped explain how I can add an AP to my lab. Thank you!

@ARSINDIANVLOGGER 3 года назад

Nice shearing dear friend 👍

@md.mahtabuddin3979 3 года назад

Good one and very useful for the IT people like me.

@itsupportpeople219 3 года назад

Thanks for watching

@onrizestar7062 3 года назад

One of the best video for Cisco AP Really awesome... Thanks for making this video

@Lyriks_ 3 года назад

I just discovered your channel ! You're a gem, keep doing what you do !

@itsupportpeople219 3 года назад

Thanks for watching

@chimsopheak-kh 3 месяца назад

Wow, it's the best tutorail. You have what I finding. Keep going on brother.

@wildcurve 3 года назад

Thank you bro for the information

@ОлексійКлименко-д3ы 3 года назад

Thanks for your hard work. Please keep making videos. It is very useful. Forgive me, but I want to make a couple of comments: 1-Could you balance the sound in your videos? You have to constantly adjust louder\quieter. 2-Could you try to remove the noise? 3-Sometimes it seems like the video is a little too long.

@itsupportpeople219 3 года назад

Thanks for watching... Lot appreciated your suggestions

@Hoscorp Год назад

Congratulations, your channel has grow up, very usefull vids. Keep it up. This vid and the reset one i will do. Thanks for sharing.

@ibrahimsaadansary9840 11 месяцев назад

Vaia you are too good. i am also working as system support engineer. if possible please make real life virtualization training video. very much needed. and one request please don't lower your quality when you will become famous. may Allah bless you.

@Jagarm 3 года назад

Thanks for the great video. Thanks to you, I got it all setup, but the speed is slower than my router

@itsupportpeople219 3 года назад

Thanks for watching...

@grahammccann8554 Год назад

Thank you for taking the time to make this video. It was very informative.

@rasailiofficial9885 3 года назад

Ok thank for infomisson sir

@itsupportpeople219 3 года назад

Thanks for watching

@fred2009ification Год назад

Cool video, man. Keep up the good job.

@k.j.fatema7865 3 года назад

Excellent content...very informative and easy to understand...keep it up

@itsupportpeople219 3 года назад

Thanks for watching

@villagedotvibes 3 года назад

Thank you so much for this video. Your content is importent for real life support. Please make a video with OSPF and EIGRP routing configuration

@itsupportpeople219 3 года назад

Thanks for watching

@pramilasingh2726 3 года назад

explained everything in detail

@itsupportpeople219 3 года назад

Thanks for watching

@mohammadshahfaisal427 Год назад

Suppose I don't have a console cable, can i configure direct access point

@mhabibtmc6399 3 года назад

you well explained i would like to say thank you for this. Appreciated !!!!!

@martinsenechal5379 3 года назад

Great video,realy helpfull. Can you tell us how to set both 2.4 and 5ghz with the same ssid Thanks

@itsupportpeople219 3 года назад

Thanks for watching.. You can add 5GHz radio interface similarly like how I did for 2.4 GHz

@asifmehmood123 3 года назад

Thanks for recording this video. This video is very helpful. Much appricated

@itsupportpeople219 3 года назад

Thanks for watching...

@luisfelipecosta9664 2 месяца назад

Thank's , from Berazil.

@abhinavsingh9957 3 года назад

Thanks for Information 🔥

@itsupportpeople219 3 года назад

Thanks for watching

@rodrigosebben1084 2 года назад

Thank you so much! this video help me to configure the ap.

@NewsBroadcasting 2 года назад

Good video , is it possible to use AIR-CAP27021-A-K9 as standalone?

@chiarenwar7139 Год назад

Have same question ....

@PatrickGuerrisi 8 месяцев назад

when I try to make my ssid I get the following "encryption already exists in interface, enable vlan"

@jeffersoncafegarcia8215 3 года назад

Good video 📸😊

@itsupportpeople219 3 года назад

Thanks for watching

@LoveHWH 3 года назад

Hello Bro, Just got a question. If I have another APs, so all the configurations will be the same in this case? Thanks

@himanshuyadav3380 3 года назад

Bhai you have made awesome video can you make video on AP light version which will configure by wlc.

@itsupportpeople219 3 года назад

Thanks for watching

@gugulethumoyo6284 Год назад

This is very helpful. Its practical

@phantran3718 2 года назад

We have two band 2.4 and 5 on the Aironet. Can you make a clip how can we make them online with one SSID only. I have two aironet, is it possible to run seamless SSID in autonomous.

@hoanggeneral 2 года назад

@IT Support People, I was able to get all the way and completed the set the BVI to a static IP (manual). However, when I tried to access the GUI interface in the web browser, the base just won't load. Any clue on how to over come this?

@TypeOneGuy03 2 года назад

same

@TrungTuyenLam 2 года назад

Do you know? The GUI interface is just used for the standalone IOS version of this Cisco AP.

@amirahmed1404 2 года назад

Very good explanation. Thanks you.

@mohamedabdelkader8846 2 месяца назад

thanks for the video :) I have a quick question , can we use power adapter instead of POE injector in case my switch has no POE ?

@omg2026 3 года назад

Thank you sir for another great video!

@itsupportpeople219 3 года назад

Thanks for watching

@ajmusicpak3238 3 года назад

nice yaar

@rashiniperera7000 3 года назад

thank you so much for this content

@KHANQTR81 2 года назад

i am trying to download ios image for " Cisco Aironet 1140 Series Access Point" but can't. will u help me please. thanks

@yamguerra-d3e 11 месяцев назад

thank you for your video it helps me a lot

@taimoorsaleem8080 2 года назад

Dear please tell me how to configure AIR-CAP2702l-E-K9 cisco access point setting. I try but it's configuration not display.

@yourictmyedu5783 3 года назад

Thanks

@tanmaymukherjee502 3 года назад

Excellent

@itsupportpeople219 3 года назад

Thanks for watching

@makmalbalouch7810 3 года назад

Nice

@itsupportpeople219 3 года назад

Thanks for watching

@MineGamer153 2 года назад

Hello, I want to ask what type of rollover cable you are using. I just bought USB-RJ45 type but I cannot connect to my LAp1142n. With WLC it works just fine. I tried different baudrate but still not working.. Thanks for any answers

@MuhammadAli-od7hd 3 года назад

Oooo lovely

@itsupportpeople219 3 года назад

Thanks for watching

@leaguebdd2053 3 года назад

It really helps a lot about the Cisco AP !

@itsupportpeople219 3 года назад

Thanks for watching

@MahananGogoi 3 года назад

Great tutorial. Thank you!

@itsupportpeople219 3 года назад

Thanks for watching...

@narender1199 2 года назад

So Super Sir ji

@lkdipeolu 2 года назад

Very Good. I love it. Do you have the lightweight version?

@sherrillboyce7189 3 года назад

Thanks! For home network, do you recommend a CISCO ASA FW to CISCO Router to Cisco Switch to VLANs for Cisco Aironet and other devices?

@itsupportpeople219 3 года назад

Thanks for watching...I reckon Cisco ASA 5505 Firewall is well enough for home network

@mauricionava1976 2 года назад

Thanks for the video!!

@PiotrWisniewski-cy2sd Год назад

Hi. Is it possible to use Cisco 9105 awx in home instalation? I've got 3 pcs of that AP, and i cannot do anything with that:( Thanks for your answer.

@SuburbanSwadh 3 года назад

Very nice 👍👌

@itsupportpeople219 3 года назад

Thanks for watching

@richardm7502 2 года назад

Thanks for this video it's for sure helpful,, and how can I configure my Cisco AP has this version AP3G2-K9W8-M?

@owaisraja5325 3 года назад

Very nice

@appelwoin76 2 года назад

Have you confiured a dhcp server for the client IP`s and where ? When I configure 6 Standalone APs, can i configure the same SSID on every AP`?

@Fun--knowledge Год назад

good and samble

@garyhedberg4318 2 года назад

Will this process work with a Cisco Aironet 2602I-A-K9? I don't have PoIP but I do have an external 48vdc power supply. Would there be a firmware update that needs to be applied first? I'm just a home user. Overkill probably but I picked up 75 of these access points at a very reasonable price.

@wajahatullah3626 3 года назад

Hi Masood, I've configured the Cisco AIR-LAP1042N-N-K9 through static IP and also added the radio 2.4 & 5 GHz & enabled in network interface but still I haven't found the Wlan in my WIFI list. The AP is showing green light instead of blue, it's mean that no one is connected through this AP. Can you please tell me what to do to make ensure that WIFI is working.?

@itsupportpeople219 3 года назад

Thanks for watching... Make sure you selected the option "Broadcast SSID in Beacon" in the Radio Configuration area. You can try under SSID Configuration "mbssid guest-mode" instead of "guest-mode" Thanks

@danicanilbertvlog8042 3 года назад

Good you're content

@itsupportpeople219 3 года назад

Thanks for watching

@Tommy-oj4hd 3 года назад

I only see: GigabitEthernet0 interface, can't see anything else like Radio or BVI1. I am running: "C3500 Software (AP3G1-RCVK9W8-M)" any ideas?

@sadamsta5302 3 года назад

Good job 👍

@ahmetgure1506 Год назад

Thanks for video, When i press apply 19:21 it says; *WPA requires 'network eap' or 'open authentication' with eap or 'open authentication' with 'wpa pre-shared key'. How can i solve this problem?

@Adnankhan-rx6xo 3 года назад

Well done

@itsupportpeople219 3 года назад

Thanks for watching

@mimegajet6346 3 года назад

nice content

@Vandelroy1 3 года назад

thank you for your video! But it does not work for me, I check my config with your multiple times, but it is the same. If I try to connect with my Windows 10 Client, I get directly the message that no connection is possible with the network, also I get no field to type the password. If i change to open Wifi with no cipher the connection works. Can you help me?

@PatrickGuerrisi 3 года назад

Man I set this up ages and I am tryin gto disable it. When get into the Network Interfaces: Radio1-802.11AC5GHz Settings settings. I click disable next to ( enable radio ) and it just goes back to enable automatically'? I cannot disable it

@ironmen9983 2 года назад

Hi, could you please have a video for Cisco VOIP configurations. Thanks

@rkbusiness5952 3 года назад

Very nice beautiful😍 😊 ❤

@ervindarya 2 года назад

would this work with Cisco Aironet 2702I AIR-AP2702I-UXK9 IEEE 802.11ac 1.32 Gbps Wireless Access Point also?

@davidnagapn6075 3 года назад

Great videos, I am looking for the autonomous firmware for a AIr-CAP3702i-A-K9. If no one has it, do you know where I can get it? I can't download from Cisco.

@PPL9420 2 года назад

Plz tell for wlc and Ap different network in possible

@monkeybluesMMA Год назад

do we need a switch to enable and connect to a cisco access point?

@dennisdoubek4329 11 месяцев назад

I have a problem, every time I want to access my access point "ap:" is displayed in Putty, but in your video "ap.home.>" every command I enter is played with unknown CMD. what am I doing wrong?

@SamMehnaz 5 месяцев назад

I have the same issue! Did you figure it out?

@trujillobb 24 дня назад

@@SamMehnaz maybe put command "ena" as enable then the password.

@ciscoroutersandlayer3switc20 2 года назад

If we have around 80 access points how we will configure all with same coding because each access point like this will kill our mind

@danielleesposito5487 2 года назад

iirc you need to use a wireless lan controller and the access points in lightweight mode

@fahimuddinsafi9958 Год назад

Hi Sir, Can access the AP from Browser cannot make any changes to it through GUI says 404 not found any solution please thank you,

@RajaRaja-sc2xb Год назад

Thank you sir

@silaskalonzoke3038 3 года назад

Nyc 🥰

@MuhammadAli-rf2jo 3 года назад

goood

@itsupportpeople219 3 года назад

Thanks for watching

@MrMARIF786 3 года назад

Hello Dear i hv cisco air ap2802i-e-l9c there is wireless option setting is disable in web console i can't add multiple Ap in on console ...plz u can help me about this there is some command in CLI mode to activate wireless setting. if u more information i can send u screenshot. thank u

@alexanderamores1760 3 года назад

Good bro,..please make another video of Cisco Voip PHONE connected to Cisco switch., thank you.

@itsupportpeople219 3 года назад

Thanks for watching...

@luiscelada1288 2 года назад

Good morning, how can we configure ap 1602l as a repeater?

@Heena-Khan-001 3 года назад

Need autonomous firmware for cisco AIR-LAP1042N-N-K9, can't find it anywhere, help me plz

@itsupportpeople219 3 года назад

Thanks for watching... Service period for 1040 series AP has already been expired that's why there is no firmware available for this model.

@hamedashrafi1 3 года назад

@@itsupportpeople219 i have same problem how i can use this acces point ?do you have that file in your archive?

@riyas2khan 2 года назад

hi bro, can we setup guest access with limited time access ?

@argenisvalero8461 2 года назад

Buenas amigo una consulta tengo este asepoint cisco aironet 1252ag ak9 nesecito orientacion ya que me llego uno y quiero saber si la consola de trabajo es la misama para el reseteo que sotwere nesecito y si el proceso es el mismo en este modelo con referencia del video publicado

@pernord26 7 месяцев назад

can you do a video with Cisco Mobility Express

@opendebate 2 года назад

Please make a video to upgrade the firmware from GUI

@shiva___pavi 3 года назад

bro thank you so much

@itsupportpeople219 3 года назад

Thanks for watching

@SatpalSohal 3 года назад

Can you provide download link to autonomous firmware for Cisco Access point 2600 series

@itsupportpeople219 3 года назад

Thanks for watching... I have image for Cisco standalone 3602i AP. If you need it I can give you the link.

@SatpalSohal 3 года назад

@@itsupportpeople219 Do you whether it will work with 2600i series.

@SatpalSohal 3 года назад

@@itsupportpeople219 I went to Cisco website and the file names are same for autonomous firmware for 2600 & 3600 series. Can you please take a look and also send a download link to the file you have.