Caution !!! Make sure the hose clamp ( jubilee clamp) is centered OVER the barb of the fitting.. In this example..it is half on and half off the spot in the hose with bibb inside !This will cause the clamp to cut into the tube and fail !!
Philips was made to cam out! Designed to be shitty like cigarette lighter 12v connections. (philips was made for I believe ww2 factory assembly lines to prevent overtorqing)
I have 3/4” black pipe with shut off valve and I plan on running 60 feet of 1/2” ID hoSe with quick connect to 3/4 house and regulator on my 13hp 420cc engine. My question even though 2 others Including one guy who told me my lines to my 1” house line would give my 13hp generator 36,000BTU and my generator would only require 28,000 BTU’s. If you know what I’m explaining is he right can I use 60 feet of 1/2” and get the BTU’s needed another said all the 1/2”” needed And a guy who said 3/4” only 12 feet . But I’ve seen quite a few running on30 ft of 3/8” and my generator was made for gas so I can’t find any BTU’. Thanks
This is for gas right ? If so this is highly illegal using a water pipe clamp . There's specialised clamps with 2 ears that must be used on gas or oxygen hoses
Kedves Fényutas! Sehol sem találtam olyan csatlakozót, amelyet a videó első másfél percében szerelsz. PB-palackról megy amúgy gáztűzhelyre a vezeték... hol lehet ilyet kapni?
Szia, barkácsáruházakban, illetve épületgépészeti vagy gázszerelvény szaküzletben biztos találsz megfelelőt! (a videóban szereplő csatlakozóz a helyi "gázosboltban" vettem) Legyen szép napod!
We have a Germania three way burner but was unable to find the right hose connector. Can you please tell me what do you call the gold metal that you first sprayed on? Is it a female flare? Hope to hear from you soon.
Hi, It's an european standard gas hose connector with W 21,8 x 1/14 lh screw (swivel-nut) and 6-8-10mm hose nipple. In hungarian language the swivel-nut "gáz hollander" "gázpalack hollander" "pb-gáz hollander" "pb gáz hollander". Searc for on google :) Have a nice day!
I tried to do it without anything but it felt impossible but then I cam here and when I saw him using the spray I didn't had one like it so I used cooking oil, it's pretty good and I managed to do it very easy
Hi, It's an european standard gas hose connector with W 21,8 x 1/14 lh screw (swivel-nut) and 6-8-10mm hose nipple. In hungarian language the swivel-nut "gáz hollander" "gázpalack hollander" "pb-gáz hollander" "pb gáz hollander". Searc for on google :) Have a nice day!
Fenyutas ez ele teszel nyomascsokkentot? vagy a bal menetes siman ra mehet a palackra? katranyozni szeretnek de lofaszt nem ertek ehhez es vettem egy perzselo szettet de nincs csokkento benne :/ gondolom akkor nem is kell!
Thats exactly how I put a screw driver straight through my hand. Put the thing you are trying to screw into a solid surface, dont hold it in your hand.