60° Buntwäsche in einer Constructa K3 von 1958.
English below.
Die K3 Typ 54 wurde von 1958 bis 1961 gebaut und läuft mit 220 Volt Wechselstrom. Die K3 ist für 3,5 kg Beladung ausgelegt und muss am Boden festgeschraubt werden. Sie hat eine Heizleistung von 2,6 KW und schleudert mit 300 u/min. Da sie mit dem Wasser schleudert, kann man sie auch einfach auf einen Rollwagen stellen.
Originalpreis 1958: 1480 D-Mark.
Die gezeigte Maschine stammt aus der Gemeinschaftswaschküche einer Wohnsiedlung aus Hamburg Wandsbek und wurde wohl wegen eines Motorschadens außer Betrieb genommen. Dabei hat sich auch jemand an den Ersatzteilen bedient. So fehlten alle Keilriemen, die Betriebsleuchte und einige Kabel. An der Maschine wurden alle Kabel und Schläuche getauscht, der Motor ersetzt und die fehlen Teile wieder eingesetzt. Bis auf einen defekten Heizstab und einer undichten Pumpe ist die Maschine gut erhalten. Vor allem die Tür sieht noch sehr schön aus.
Programmablauf:
Vorwäsche, Hauptwäsche, Vorspülen, Kaltspülen, Schleudern, Klarspülen, Trocken-Schleudern.
Das erste Zwischenschleudern überspringt diese Maschine immer. Da ist wohl noch was am Schaltwerk zu machen..
The K3 Type 54 was built from 1958 to 1961 and runs on 220 volts AC. The K3 is designed for a load of 3.5 kg and must be bolted to the floor. It has a heating output of 2.6 KW and spins at 300 rpm. Since it spins with the water, you can also simply place it on a trolley.
The machine shown comes from the communal laundry room of a housing estate in Hamburg Wandsbek and was probably taken out of operation due to Motor damage. Someone also helped themselves with spare parts. All the V-belts, the operating light and some cables were missing. All cables and hoses on the machine were replaced, the motor was replaced and the missing parts were reinserted. Apart from one defective heating element and a leaking pump, the machine is in good condition. The door in particular still looks very nice.
Program Sequences:
Pre-wash, main wash, pre-rinse, cold rinse, spin, final rinse, spin dry.
This machine always skips the first intermediate spin. There's probably still something to be done on the timer...
12 окт 2023