No video :(

Contour Cutting with SignMaster Pro Tutorial

Подписаться 121 тыс.

Просмотров 140 тыс.

50% 1

Not sure how to contour cut your printed transfers with a Vinyl Systems Edge or Evo cutter? Join Travis as he guides you through the process in SignMaster Pro, included with all sizes of the Edge and Evo vinyl cutters.
Cut With Vinyl Systems ➜ heat.press/VS
Get More Great Tips - Subscribe ➜ goo.gl/Duss3m
=====================================
Products used in this video:
Vinyl Systems Edge 28 Cutter: heat.press/vse...
Canon Pixma iX6820 Inkjet Printer: heat.press/pixma
MultiTack Carrier Sheet: heat.press/mul...
SignMaster Pro: heat.press/sig...
=====================================
Show us what you’ve created by using hashtag on Facebook or Twitter #HPNCreators

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 132

@persographix1529 2 года назад

Excellent it helped me to cut without problems Thank you very much

@The_AlexK_Project Месяц назад

Where did you get the carrier sheet? I don't see any on your website.

@chefed5105 Год назад

Great video! Have a few questions, how thick of mat can I use for cutting and Would you know how I can get the sign master software plugin to work with Corel Draw. Thanks so much

@shakethianapier5928 4 года назад

Hi, I don’t have the “include full bounds option” how do I get it to show up? Thanks...

@voltaicart6990 2 года назад

I've had the evo 54 inch cutter for a few week. The BIGGEST issue I have is I cannot change the measurement units . The machine reads in millimeters and I cannot change it.

@En3rg3t1c Год назад

how can I remove the offset of the clipping along the contour, I have an offset to the right

@sandaruadvertisingnattandi6948 3 года назад

Thanks

@Lostdesiree Год назад

hi,how to edit page marks to cutting page?i cant find this features

@handycaballero7950 2 года назад

i cant get my edge to contour cut i’m doing all the correct steps as you indicate in this video step-by-step and my machine scans the first mark then go to the other ones lol in it drags like an inch past the registration market in scans to happen that goes over to the other side it’s past paper and it reads up to the third one it doesn’t go back to its original spot and it fails the detection test every time

@HeatPressNation 2 года назад

Just replied to your other comment, but we wanted to comment here as well. For assistance with your VinylSystems Edge, please reach out to our MyExpert Support Team at support.heatpressnation.com or (800)215-0894. They are available Monday - Friday, from 7:30am-3:00pm PT and will be happy to assist you

@fightleagueatlantic4414 3 года назад

any chance you do any customer feedback on how to get a machine working properly?:)

@burmy1552 2 года назад

It seems impossible to find any information anywhere on how to calibrate these machines. Nothing on optical scanners, only laser.

@tonertrevino 4 года назад

i am trying to cut but in the wizard there is on the cut view it puts a like water mark gray lines that are actually cutting into the image what do i do?

@The_AlexK_Project Месяц назад

Buy a different brand

@harrywiley4793 4 года назад

GOOD MORNING I'M A BEGINNER AND I HAVE A QUESTION ON THE KI 720 IS TH A WAY TO CREATE SHAPES OFF THE SOFTWARE

@patriciavogel2581 Год назад

Bonjour je voudrais savoir quel papier utiliser pour avoir un résultat comme ça avec l’imprimante

@nidiaambrocio5807 Год назад

Can you do it with a sk-375

@KenZCustom Год назад

Is it able to cut laminated stickers? If yes, what blade do I use and what speed and pressure? How thick of laminate is ok to use? Thanks in advance for the help

@Irrelevant554 Год назад

Yes, just adjust the force you should be good

@romario3056 2 года назад

My old computer just died. I put my signmaster serial on my new one and it says that's currently being use on another computer? What should I do now?

@HeatPressNation 2 года назад

For support with your Vinyl Systems machine, please reach out to our MyExpert Support Team at support.heatpressnation.com or (800)215-0894. They are available Monday - Friday, from 7:30am-3:00pm PT and will be happy to assist you.

@hubertwrotny4861 4 года назад

Hi It is possible to set cutting of the piece of vinyl after finishing the task? Like i want to cut off 10 circles in one row, cut off all of it, and then make another 10 circles?

@amwilliams76 3 года назад

Thanks so much!

@Kleano52 3 года назад

"Selected Objects" is greyed out for me and there is no Include "Full Bonds" option either.

@ScaleModelAddicts 3 года назад

You did not select the item you are attempting to contour cut before selecting the contour cut wizard.

@kaleyahw6917 3 года назад

How do I get the white paper and clear paper to print my design out what are those steps to get the logo printed out in color

@HeatPressNation 3 года назад

Travis explains this at 2:52. The printing is done on a separate machine, in this case it's our Canon Pixma iX6820 inkjet printer. From SignMaster, send the traced image with contour marks to the printer. Once it's done printing on your heat transfer paper, you then bring it to your vinyl cutter for contour cutting. A carrier sheet (heat.press/multitackcarrier) or cutting mat (heat.press/cameomat1224) is important for this process. It holds the paper in place and keeps it from getting shredded during the contour cutting process.

@ViewFirst 4 года назад

hello can we do two different force cut in one cut. like cut 40g 1st then after that 80g.

@HeatPressNation 4 года назад

You can do multiple passes, but only at the same pressure.

@aljewels5640 4 года назад

My project is very basic I cannot get it to format . I want to know do I need additional software for creating my 30 to 40 plus logos onto a sheet to cut. I have already gotten the file Vectorized but I cannot move forward I could use some recommendation I have a new machine that I cannot use.

@shabirhussain7557 Год назад

Hi which version I need for liyu cutter?

@davidlovett8270 Год назад

Hey. I am trying to to do contour cutting with my signmater pro but I don't have the option to do automatic arms. Do you think my cutter have anything to do with that I have the vevor 870 34"

@HeatPressNation Год назад

Hi David! It may be. We recommend reaching out to your supplier for assistance.

@navidthenerd2027 3 года назад

Does every cutter machine can do such a thing? or it has to have laser and sensors and shits like that?

@HeatPressNation 3 года назад

No, not every cutter can do this. You're correct - the cutter must have a laser sensor to detect the printed contour marks. The Vinyl Systems Edge & Evo cutters can do this, as well as the Silhouette and Graphtec brands of cutters. All GCC cutters with the "LX" indication can also contour cut.

@thrashmetalmessiah85 2 года назад

Hello. Great tutorial. Thanks for sharing,. My question is- i use the KI-375A die plotter/vinyl cutter. Will this also work w my machine? It came w the Sign Master software. Thanks!!!

@HeatPressNation 2 года назад

If it came with your machine, then it should work. The version of SignMaster that we sell the Vinyl Systems edition, so ours only works with Vinyl Systems cutters.

@cjthe1206 2 года назад

QUESTION QUESTION QUESTION: I have an HP printer that can be used with heat transfers but I have a SPECIALIST Vinyl Cutter Can I still do that??? PLEASE ADVICE, THANKS.

@HeatPressNation 2 года назад

Sorry, but the VinylSystems Specialist does not have contour cutting capabilities. For that, you'd need a cutter like the GCC Expert II LX (shown in this video), VinylSystems Edge, Silhouette Cameo, or similar machine. You can find these cutters and more at www.heatpressnation.com/collections/vinyl-cutters-vinyl-cutters/

@cjthe1206 2 года назад

@@HeatPressNation can it be any of the silhouette?

@sanaarts1960 3 года назад

My automatic ARMS button is disabled, what can be the reason. please advice ?

@HeatPressNation 3 года назад

If you have a Vinyl Systems Specialist, this is normal. That cutter does not support ARMS or contour cutting. If you have an Edge or Evo cutter, please reach out to our Technical Support Department for assistance. They are available Monday - Friday, 7:30am - 3:00pm PT, at (800)215-0894. We offer free lifetime technical support for all of our products.

@theinkdmoose4204 2 года назад

How can I get a contour cut around an entire graphic on Signmaster? My only options seems to be each individual component of the graphic, only want the outline.

@gracegraphicsdesigning6398 2 года назад

Thanks for ur good explanation,I love this and understood every details 🙏👏👏

@leahdobson199 7 месяцев назад

Can I cut vinyl with this program and cutter?

@The_AlexK_Project Месяц назад

Did they ever reply to you?

@SHARPZCO 2 года назад

Does this software work with Mac ?

@HeatPressNation 2 года назад

No, SignMaster & SignMaster Pro will only work with Windows computers.

@SHARPZCO 2 года назад

@@HeatPressNation ok forsure man thank you for the response!

@johnlouiejavier810 4 года назад

Is this cutter the same as cuyi?

@Nick-do5ki 2 года назад

if you are printing on heat transfer do you need to use the carrier sheet?

@HeatPressNation 2 года назад

When contour cutting paper of any kind (heat transfer paper included), we always recommend using a cutting mat or carrier sheet. This keeps the paper together while it's being cut/

@janeasam786 3 года назад

Please do you have tutorial on easycut software... Kindly leave a link. Thank you

@HeatPressNation 3 года назад

We don't have any tutorials on EasyCut software. Sorry about that.

@marcorodriguez6488 4 года назад

Wait How do you get color on it? Also When you put it in the printer is that Vinyl like siser weed?

@HeatPressNation 4 года назад

For this video, we used a piece of regular copy paper, printed on the Canon Pixma iX6820 (forward to 2:56). But to put on a t-shirt, you'll want to use heat transfer paper. You can print on heat transfer paper with nearly any decent home/office printer. For more info on heat transfer paper, check out this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7S5i1gauywU.html *We just updated the description to this video with links to all the products used in this video, including the printer.

@victoryacademybasketball 3 года назад

has this worked for anybody??? everything leading up to contour cutting has been successful. but this is bad.. maybe some steps need to be added but my scanner isnt reading anything...... PLEASE HELP

@HeatPressNation 3 года назад

Please reach out to our MyExpert Support Team at support.heatpressnation.com for help and troubleshooting your Vinyl Systems cutter. A couple general tips: - Bright lights can affect the laser's ability to read the contour marks - Load the printed sheet in the exact orientation as shown in SignMaster - Print scale should be 1:1 / 100%. Anything else may cause issues with registering. - If mirroring the image, do so in SignMaster. Do not allow the printer to perform mirroring.

@Cali_life619 4 года назад

I have the same package i just got it in the mail. Im having trouble with the registration marks, its wont go past the 3rd registration mark. It stops reading on the fourth and it says to re start. Where can i get some help?

@HeatPressNation 3 года назад

So sorry for the late reply! We provide free technical support for all of our products. If you ever have an issue in the future, please visit support.heatpressnation.com.

@wendysilva2294 2 года назад

Can any type of carrier sheet be used?

@HeatPressNation 2 года назад

Sure, as long as it's sturdy enough to not crumple when rolled through the cutter. We really like using the Silhouette cutting mats - www.heatpressnation.com/products/silhouette-cameo-cutting-mat-12-x-24?_pos=6&_sid=ccc7e854b&_ss=r

@mystikhazel2055 3 года назад

Thank u

@hwrida 3 года назад

In the video you say carrier sheet or cutting mat. Can you use the Silhouette Cameo mat?

@HeatPressNation 3 года назад

Yes, we use the Silhouette cutting mats all the time. :)

@hwrida 3 года назад

@@HeatPressNation when you use the cutting mat do you change the force you might normally use without the mat? Thanks

@MikeStarzec 4 года назад

how large of an image can signmaster pro print and cut/contour cut?

@HeatPressNation 4 года назад

Depends on the max cutting width of the cutter. We have Vinyl Systems cutters that range in size from 24" up to 52". You'll want to keep the registration marks within the max cutting width of the cutter, so they can be read by the laser.

@torrentk1422 3 года назад

@@HeatPressNation Can you make a video for a large image? on paper 11x17 or 13x19

@richardthames661 2 года назад

Trust me don't waste your money

@leonardocastillano7735 2 года назад

how to avoid misaligned cutting?

@HeatPressNation 2 года назад

You may need to calibrate your vinyl cutter's contour cutting settings. For more information, please get in contact with our Technical Support team at heat.press/support

@ghowaadams2954 2 года назад

can you contour cut using a seiki cutter using vinyl master?

@HeatPressNation 2 года назад

The version of SignMaster that we sell is only compatible with Vinyl Systems cutters.

@mobicey 3 года назад

On the specialist it don’t show like this

@HeatPressNation 3 года назад

The Specialist does not support contour cutting. So it will not have these features.

@mobicey 3 года назад

@@HeatPressNation idk what to tell you but it does contour cut I just don’t know how to do it great. I send videos to you guys on Instagram showing ya that the specialist does contour cut. My ig is @Mob_Icey

@trisjafaye653 4 года назад

Why won't it scan the registration marks? It just proceeds to cutting

@HeatPressNation 4 года назад

You can see the machine scanning the registration marks at about 3:56-4:17.

@trisjafaye653 4 года назад

@@HeatPressNation Sorry, my bad. I meant my cutter won't scan and just proceeds to cutting. I tried to follow this video, but I think I'm missing something. What could be the problem T-T

@mr.ramirez3025 5 лет назад

its about dam time lol

@3KHandles 3 года назад

How do you detect the USB

@HeatPressNation 3 года назад

This video shows how to setup and connect your Vinyl Systems Edge cutter to your computer: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tK9xf5FTUWc.html We also have videos for setting up the Specialist and Evo here on this playlist: ru-vid.com/group/PLY9aNS49KtIyNYBeKYRvDFxmV17aD6Q6X

@parichayagfxedits 4 года назад

Hi! Can I use a normal non sticker paper to test the results as shown in the video???

@HeatPressNation 4 года назад

Definitely! When testing and calibrating our contour cutting, we'll use cardstock or regular paper.

@maddgabbtv3663 4 года назад

HeatPressNation what kind of paper are you using

@glennford4748 3 года назад

Is it a difference when using signmaster basic? Or can this only be done on signmaster pro??

@HeatPressNation 3 года назад

Vectorization & Contour Cutting can only be done on SignMaster Pro. SignMaster Basic is for the Specialist vinyl cutter, which cannot contour cut. So those features are not included in the Basic version of the program.

@gregorysmith7143 4 года назад

Thankyou!!!

@osamaamin7748 3 года назад

How to remove the line appearing on the edges during printing

@HeatPressNation 3 года назад

Might be an issue with the printer. Can you provide some more details?

@wakimiconcepts2881 4 года назад

kindly show us Contour Cutting with Anycut Pro Tutorial

@SNataliia68 5 лет назад

Please help! How to make double cut per line??

@HeatPressNation 5 лет назад

Send to cutter -> Cutter Control Tab -> Passes Each pass is how many times it'll be cut. Set it to 2 for a double cut, 3 for triple, etc.

@mjones466 4 года назад

is that transfer tape your using

@Kleano52 3 года назад

I wanted to know the same thing.

@IAmLaegion 3 года назад

How did you get the marks in each corner?

@HeatPressNation 3 года назад

These are created by the cutting software and are sent to print with the image. If your vinyl cutter has contour cut (sometimes called print & cut) capabilities, you should have the option to add the registration marks in the included cutting software.

@marcozeferino69 4 года назад

In all my images he tells me that there is nothing to cut. What I can do?

@HeatPressNation 4 года назад

- Make sure your image is in a vector format. Raster images will not cut. - Delete any elements that you do not want cut. Select only the vector graphic you want to send. Those are the two most common solutions. If you're still having trouble with your Vinyl Systems cutter, you can submit a request for technical support at heatpressnation.com/technical or call (800)215-0894.

@alrawi6316 3 года назад

How can I write in Arabic inside the program

@HeatPressNation 3 года назад

Sorry, but SignMaster does not support Arabic text. It works in English and Chinese only.

@vanessarincon483 4 года назад

Can I use that program on specialist cutter or no

@HeatPressNation 4 года назад

Yes, you definitely can. However, since the Specialist does not have an optical eye for contour cutting, that feature will not work.

@vanessarincon483 4 года назад

Ok thank u we decided on the edge 28 hopefully we can order it next week excited already bought vinyl lol just need the cutter

@HeatPressNation 4 года назад

Awesome! Hope you love it =)

@onettawatt3871 2 года назад

Hello, what type of vinyl is that?

@HeatPressNation 2 года назад

This was done on plain copy paper, just to illustrate the process.

@onettawatt3871 2 года назад

@@HeatPressNation what’s the clear paper?

@timbervalleyhomestead 2 года назад

@@onettawatt3871 looks like regular contact paper

@bobbybouchewaterboy 4 года назад

Is this the cutter from ebay

@HeatPressNation 4 года назад

I don't believe so. This cutter is not currently available on eBay.

@sethriggle1462 3 года назад

This is so annoying. LOL it doesn't give me any of those options. Sign Master just had an update and for some reason it doesn't want to work for me

@HeatPressNation 3 года назад

If you're having issues with SignMaster, please feel free to reach out to our Technical Support department at (800)215-0894.

@richardthames661 2 года назад

People don't waste your money on this when you do have a problem they tell you it'll be one or two business days before we can help you but yet they want you to spend $700 on one of their machines

@HeatPressNation 2 года назад

I'm sorry if you've had an issue with any of our products. We try our very best to respond to all email requests within one business day. For immediate issues, our team is available from Monday through Friday, 7:30am to 3:00pm PT at (800)215-0894 [option 3 for support]. We offer free lifetime technical support for all of our products.

@The_AlexK_Project Месяц назад

Looks like is the same cutter that Vevor sells. Often it's made by one company and put different brands on them.

@seasonsjohnson1948 4 года назад

How do you mirror the image

@HeatPressNation 4 года назад

Fast forward to 3:02 to see how to mirror an object

@seasonsjohnson1948 4 года назад

@@HeatPressNation I missed it thank you. Ur such an awesome company

@johnlott1507 5 лет назад

How much for the cutter

@mr.ramirez3025 5 лет назад

bruh go to their web site don't be one of those customers who walk in to a store and wants to know what everything cost before looking at the label

@lynndawilson1678 4 года назад

What’s vector format and how do I find it?

@HeatPressNation 4 года назад

Vector formats are usually .EPS, .SVG, .AI, and sometimes .PDF. These are graphics that are made up of lots of shapes. Raster images are those made up of lots of pixels - like .JPEG, .PNG, etc. Because vector graphics are made up of shapes, you can stretch them, shrink them, and they will keep their perfect definition. (If you stretch out a JPEG, it'll get all nasty and pixelated.) SignMaster Pro allows you to convert raster images (like JPEG) into vector images (like SVG).

@hwrida 2 года назад

You guys definelty need to find another program to use. There is no videos or tutorials from either you or the manufacturer and how to do anything with this software beyond basic stuff. If you go and try to find answers from the companys FB page it just shows many people over the years who have asked questions and never gotten any answers. This software seems to be a ripoff of Vinyl Master which is the closest thing to it but still different enough to not show how to do basic or more advanced things. Like, does this software offer an "Eraser" icon? Does it allow for masking?

@HeatPressNation 2 года назад

We could definitely use some more tutorials for this program. Here is a playlist of all our current videos: ru-vid.com/group/PLY9aNS49KtIyNYBeKYRvDFxmV17aD6Q6X SignMaster is actually developed by the same software company that makes Vinyl Master, which is why they're both very similar.

@hwrida 2 года назад

@@HeatPressNation but different enough that none of the more advanced techniques from Vinyl master work on Sign master. As for "your" videos As I stated above, real basic stuff being shown. Just enough to get someone started.

@burmy1552 2 года назад

I agree. The lack of resources is horrible. I'm starting to regret this purchase. They really need to put out practical videos. The manual is useless.