Contrasting Stick Welding Styles : 6010 Root Pass on Pipe with Bob Moffatt 

👇WeldTube Store👇 www.weldlife.com

I've been welding for around 40 years and after watching your videos I realize that there is so much I have to learn that I dont know where to begin. I spent most of my time doing underwater welding which I guess is another story. Natural teachers like you willing to share their knowledge with younger people , who are not afraid to work for a living, are a treasure! My welding helmet is off to you!

Bob hate to tell ya mate, but your the old timer most of us reference. You 2 guys with your contrasting styles is a pleasure to watch.

Love it when y’all are together man

I can't stop smilin' to see you both in one screen.. 👍

I love these collaboration videos!

i love you to guys with your technique you always teach as thanks very much Bob and your colleague ,i have learnt some technique in 2g pipe and 4g plate when using both 6010 and 7018 thanks very much.

Nice. this put a smile on my face. We use 7016 DCEN for open root and I like to drag it until the gap starts to close. Then I switch to a J motion. Longarc it a tiny bit on the straight part of the J to heat up the base metal in front of the puddle to keep the keyhole going. After that rod is finished I can up the amps and start dragging again. I'm a two hander like Bob, so messing about with a remote is not for me. Like always the secret is in reading the puddle and the keyhole.

Worth my time! Good show and tell!

WALKING THE SMAW KEEP UP THE AWESOME WORK!!!

Sparkling my eyes to see both of you Sir's..Solid followers here.

I’ve been waiting for this video! Awesome work guys!

Great job gentlemen.

Man I wish I had a teacher as good as either one of y’all.

Great video! You are good together! And I love my BSX welding gear!!!!!!!

appreciate both u guys perspective on how you weld a root pass

Love you guys!

What a nice tutorial brothers.. thanks for sharing this video

Yeah truly do love you guys together

The OG and the young OG of welding

Could you do a video on 309L-16 stick electrode running mainly vertical and overhead? We have areas where it is required to do this at my work and would like to see something on it cause no one has a video and trust me I know it’s a pain. Love the vids man keep em up! Especially the collaborations with Bob!

I can watch these guys all day lol

At the end of the day it was a good day. Love it

I like watching both of them welding together

Great work guys

K.I.S.S. principal works best for the most. I used the "x-mas tree" patern it as well for awhile but it was too easy, when I was beginning to be too slow with the patern and burn that key out. The drag method seems to work better for me now as the pacing of the pull (5 to 10 degree drag) is much easier and I figure that it'll work best for the most. It's nice to see the same result from the two different methods...Respect fellas.

This is epic 👨🏾‍🏭

Bob is still waiting on that 5 amps

Excelente video explicativo !!! Que parámetros de aperaje usan ? Muchas gracias

In welding class and this is such an awesome video! This is a great show. If anyone has any tips or comments please do so, im ready to learn. Thanks

Thanks for these videos and they gives me an effort in the my welding practice, from:Mdz.G.

Great vid guys, I'm recertified from double extra

I fitted for alot of Golden arms but Mr. Hjalmar and my welder Lux are the best in my book.🙏 Power plant life

Haha I love how y'all are taking shots at eachother

Man! ! ! This is fantastic 😅

Thanks it's help a lot

You can hear the rod penetration with 6010. Both gave x-ray quality penetration one gave you more to grind being safe the other is wire brush and go. Both methods were showed excellent roots with 6010.if you don't hear the rod on the inside very little Sparks comming back you are then burning Thur.

Cool video

I’m a whip guy I like to see the key hole and fill it back in and it makes the weld on the inside looks like you back welded it. When I drag it sometimes the arc tends to favor one side of the bevel which makes me nervous about passing x Ray

Trees or arrows are great to have if the opening gets out of hand.. great tools to have.

You better show the appearance of the penetration there. So we can compare your christmas tree pattern and the drag. We're not here to criticize bro. We are also a welder. In this video im half satistied. Im sorry to say. I hope you show us the root because Bob is saying we got to clean inside to see. But you and Bob only see the root and not the viewers.

It's good to learn both techniques but my preference and the way I was taught was Bob's technique, but in reality the name of the game in the field is production, production, production,so the faster way is the better way if you take your time they notice how long you take but definitely both ways are good to learn

Fun video.

At 6:20 , he’s scared to death bob is gonna flash his eyes 😆

It just as enjoyable the second time around on your channel. You had a pretty big keyhole at one point there...😨 & then you recovered it. Bob is fast and that's something that comes to mind when checking out his arc shots in his videos; He'll strike an arc, move the puddle FAST, and then you'll hear... Don't forget to subscribe to weld.com!

You never buffed that bead and got a close up of what you laid down...

Have you ever tried a arc pig HF I have a 1960s sa200 red face and a weldanpower 225 I would like to have the high freq for the aluminum on the small machine but does it work

I like Bob's method better, but that boy from the 3rd coast is slick! Fancy jacket and hood!

Good question bobs

I wish the cameraman would focus on the weld being made and not meandering around the room. Makes it more difficult to see whats going on when you are actually trying to learn this stuff.

Body laungue got me dieing lol

Xmas tree pattern is slower....during to the fact that you are opening the keyhole wide and I return are adding more metal. Drag is quick.....but more likely to leave an edge.

Please do a video on 9 chrome root pass. Tig.

David CháveZ muy buenos soldadores desde. MINATITLAN VERACRUZ

Excelent

First time ever seeing drag technique with 6010 on pipe, an I'm in school now an I want to try it because this 6010 pipe has been kicking my ass! Does having the heat high make the dragging easier, or the dragging angle or both?! Note. IT'S JUST FREAKING 2G

What welding gloves do they have on anybody know ?

What Jacket is Hjalmar using in this video. I’m interested in getting one thanks.

What about doing a 6GR pipe?

Did he ever turn it up 5 amps @ 5:30 😅

Lol.. 2.3k views on weld.cim.. 1.8k on weld.tube.... great video on both!!!

What is the tuition cost for learning all welding processes on plate and pipe?

Also... where was that inside shot of the pipe?

Good

buena tecnica amigos pase de raiz 6G qude Dios les bendiga un saludo desdde arequipa peru

nice brother

where did u get that welding shirt ??

So honest question. If both welds are equaly sound, wouldn't the drag method be superior in terms of cost effectiveness? The Christmas tree method used more rod and in the long run that would cost more would it not? This is to say if both weld methods are good

Master

Doing Hjalmors technique you put in a heavier root or not?

Nice weld

When I hear brother, decent!

👍👍

I sure would like to see a "contrasting stick" video that includes some old dude - like myself - trying to run a stick bead with shaky hands. Or even trying to scratch an arc with shaky hands without sticking the stick. Yeah maybe you've got some super machine with a DIG, but what about the old machines?

👍👍👍👍

Bob's technique is way better, much less heat input that is crucial on most alloys such as stainless alloys, duplexes..

👍

جيد جدا انا معجب بي قناتكم

13:51-13:56 ahhhh... that's how ya do it!

I weld like Bob, stab and drag

Bob how do you like that esab hood?

What's the keyhole???

Hey guys, I have a lot of kids asking the difference between ac welding vs dc welding. Can you please make a video explaining the difference of the process? Thanks

Yo e ido a el canal del joven y solo pone dos tack 12 y 6 clock lo vi que Bob lo presiono mucho y lo desconcentro a demostrar su estilo que es uno muy bueno no me convence penetrar sin movimiento queda muy superficial y fino

no root!?

Bob reminds me of Hank Hill

Зашибись 👍

The Christmas tree style is good only if you are taking pipe test because you will not alfred of blowing true the root pass if you are doing the hotpass

Bring hjalmar back he is a great teacher

Did the young guy need 4 rods to do 1/2 that pipe?

No shot of the root?!?

Well...... Bob is the man. Why would a company hire someone who is three times slower.

Bob are you available to visit our campus?

if i have thats welding machine hehehe

11:40 Starts losing his edge a little bit... (*cut to the other view!*) Alright he’s got it back (*cuts back to arc view*) LOL

maessstrrooooss! como quisiera quemar junto con ustedes... felicitaciones...

UP 5!! LOL

Q amperaje utiliza

😄6010 ⬇hej

Duplex butt weld please!