Hey @techathome could you help me? I am making a tank with the same mechanics as shown in your video but I want to add another moter, one servo and a way to shoot a gun using a nichrome wire. I am useless at doing any type of coding, would appreciate it if you helped *Edit: not an actual gun just a model one using flash cotton to shoot a small metal bearing
Thanks so much for the upload, great step by step explanation! I also have a Fly-Skyi6 and have been looking for something to implement with. This will be significant for the start of my project!
I can't seem to get the code file to work. I can see the code in your video through the (if) line. Any chance someone help with the remainder? I built a project with the exclusion of an arduino because code for the project would've been way outside my ability but the last item, linear actuator, has forced me to use an arduino. I can do small simple and hopefully at some point do a more complex code on my own in a future project. I just haven't progressed thar far. Harder for older people to grasp this but I'll get there
I made it but the motors started rotating as soon as I connected the battery, I turned on the elivon and checked every connection. I used 5v bo motors in it is that why it's not working? Please reply 🙏🙏🙏🙏
When I tried this I was using analog A0 for the flysky signal and digital read function that reads like analog in and maps it to the outputs. It didn’t work that way but now I found this video thanks. But why does analog read for A0 not work.
@@techathome all works great as shown in your vid , im useless at any form of coding , how would i be able to connect up another motor driver and control 4 motors independently ?
Sir with the same code only one motor is running I have checked the motor driver and the motors are okay. What can be the problem sir? Is their any issue with the code
I really like this lesson and I am studying UNO ,AVR 328. I have a question signal output digital pin 4 and pin 7 right? signal output pin 5,6 PWM right? If want to control something else what should I do pin4 ,5 pin 7,6. If I don’t have motor driver
L298N was not able to handle properly. I have already done updated video using BTS7960 with speed control: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EnbkdrYQ0NE.html
Yes you can use any transmitter, Make sure correct receiver output is used. Also, in the code we have used values for comparison, those values you can print on serial monitor and edit accordingly for your Transmitter.
U can make using 5v relay module with Arduino You can assign Channel 5 to Switch A in transmitter for switching on/off the LED strip In Arduino code, you have to read channel 5 (just do as other Channel in the code ) Use if statement and you can activate relay according to value
Yes it will work, But 2 things to take care, 1. Print the values from both channels on serial monitor(Just uncomment serial.print lines in the code) and based on the values coming from your receiver, edit values in if statements. 2. For robotic movements, check how to mix two channels in ct6b
Then this will help you: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pnSPDeeDyxs.html But modify the values based on your receiver in the code (if else statements)
Yes same code Connect another motor in parallel to left motor Similarly, on the right side I guess I have shown in the video somewhere about connection of 4 motors
Hello brother! Actually I was planning to make a remote controlled bike using a bo-motor and a servo motor to turn the handle connected with CT6B receiver, so wat should be the connection of bo-motor and receiver..... Cuz bo-motor don't have signal pin Em not getting wat to do so pls assist me 🙏🙏🙏
Servo motor directly Connect to Receiver For BO Motor refer these video, but use( 9v battery instead of 12v) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Pcct-0RmcZE.html
@@techathome thanks for the reply!! bro as I am making a bike..... using any kind of Arduinos makes my bike bulky....so is there any idea other than Arduino???? Pls suggest
@@techathome thanks for reply brother!! if I use Arduino nano I must compulsorily use any of motor driver viz. L298N....it definitely makes my bike bulky.... Okay wait!!, I also have an alternative way of making RC bike by using HC-50 bluetooth module without using any receiver....but wires and connections makes bulky....so wat do u suggest for tat