Convert Tritech Airless to Air Assisted Airless with Wagner GM4700.

Подписаться 1 тыс.

Просмотров 8 тыс.

50% 1

I'll show you how I converted my Tritech airless into an air assisted airless sprayer using my Rolair portable air compressor and a Wagner GM4700 spray gun.
In this video I show my initial set up and some suggestions for which tips and air caps you'll need for waterborne wood coatings.
I also tell you why I like the GM 4700 gun and how it compares to my Kremlin Xcite gun.
Here's the link for the ultra quiet air compressor:
amzn.to/3HPqmP1
And the link for the GM4700 gun: totalfinishing...
Thanks for watching! If you've found my videos helpful, please consider supporting - (see link in bio) - buymeacoffee.com/raymondw
Thank you!

Опубликовано:

11 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@matt9822 7 месяцев назад

Thank you for this, was considering a kremlin 30:1 to step my game up, but drastically underestimated the size of the compressor required, basically impossible to bring to the jobsite.

@esteemeduser8290 5 месяцев назад

The advantage of having a separate compressor instead of having an all in one unit is that you can use that compressor with machines dedicated to solvents, as well as for blowing dust off your work pieces.

@duartepaintinghandymanservices 2 года назад

I suggest getting water seperator for your compressor

@vyaterminaciones 2 месяца назад

Hi mate, nice videos….. a question …How many liters is your compressor?thank you for your help

@nimzm1019 2 года назад

nicely done. Can't wait for more vids :)

@MILAD.VAHDAT 3 месяца назад

Hey thanks for your video,how do you compare this to the new graco xt490 ?im considering to get between these two machines,graco or tritech for air assist airless

@Julianme-pm7vb Год назад

You a master of painting

@MILAD.VAHDAT 10 месяцев назад

Is that compressor is enough to atomization the paint? I'm trying to make my graco airless transom to air assist like you but I'm concerned about the compressor

@homesteadcabinetdesign3406 9 месяцев назад

Yes, Make sure to have at least 2 hp compressor.

@duartepaintinghandymanservices 2 года назад

You should try the gm 3600 gun, it has flat tips that are reversible in order to clear a clog, that's one thing I hate about flat tips

@homesteadcabinetdesign3406 2 года назад

The 4700 is pretty much the same gun. Uses flat reversible tips.

@duartepaintinghandymanservices 2 года назад

@@homesteadcabinetdesign3406 nice, I didn't know, that's an awesome invention

@crossxcats Год назад

think i am building a similar set up for painting millwork was wondering if other people were doing it like this :)

@homesteadcabinetdesign3406 Год назад

Yes! I know others are doing it.

@robbcustomcoatingsltd.5767 2 года назад

What you like using for spraying Renner blue cap or red and what tip. ?

@homesteadcabinetdesign3406 2 года назад

Thicker coatings like primer use the blue air cap and 13 tip. Top coats I thin up to 10% and use the red air cap with a 10 or 11 tip. I personally like the 10/30 double office for top coats.

@paintasticpainting Год назад

Great video

@joobasics6891 Месяц назад

What's the finish quality compared to HVLP?

@homesteadcabinetdesign3406 21 день назад

Finish quality is great!

@AlexReyes-lk5kr 2 года назад

thank you very much !!!!!! Most appreciate

@slawomirbieganski5315 Год назад

Hi Do you still like that set up? Just bought same gun and will see it up same way

@homesteadcabinetdesign3406 Год назад

Yes I still do! Especially for spraying topcoats. Not as fast as an airless, but you can spray with much less pressure.

@slawomirbieganski5315 Год назад

Im looking for more to spray on site Im ok with airless in my shop but sometimes on site I got some sags

@raymondglick3345 Год назад

@@slawomirbieganski5315 This will give you more control than an airless sprayer. choose a wider fan pattern as well, and with practice you'll get almost no runs. It will depend some on what product you're spraying, tip size and speed as well.

@slawomirbieganski5315 Год назад

Thank you I hope I’ll like it

@derekmoen5382 2 года назад

my intentions are to do this to titan ed655 but im not sure its needed lol. i have just had it in my mind for 2 years that it is. is there a huge benefit from what you normally do? i usually just spray waterborne sherwood top coats.

@homesteadcabinetdesign3406 2 года назад

One of the benefits of an AAA gun over airless is that they don't spit like an airless. However, there are some very nice airless guns and tips, but they all spit to some degree. The downside to AAA is they are higher maintenance. If you don't keep them super clean, you can have issues with clogging tips and air caps. In my opinion, it's worth it though despite the extra maintenance. It can be a challenge if you have employees. Airless is the easiest sprayer for employees to learn to maintain .

@duartepaintinghandymanservices 2 года назад

The ed655 is perfect for this aaa setup

@duartepaintinghandymanservices 2 года назад

I suggest if you're going to turn that into a AAA get the gm 3600 gun it has flat tips that are reversable and easier to clear when clogged, also a small pond pump are ideal for this they run continuously and not as loud as compressors, you can find them used on ebay for $100 thomas makes some good ones, remember you don't need that much air for an aaa gun

@markhorton9020 2 года назад

do you spray clear topcoat and paint out of the same sprayer?

@homesteadcabinetdesign3406 2 года назад

I don't like to, however you can if you flush the system thoroughly

@arturo4700 Год назад

Is ok But use a diaphragm sprayer like ed655 plus, much much better than pistón

@homesteadcabinetdesign3406 Год назад

I would agree except that the Tritech piston pump purrs like a kitten! No pulsating at all

@Bobtrain007 2 года назад

Instead of talking so much about tips and such I would like to have seen how you dial it in and spray.

@royhuang9133 2 года назад

Over talking.

@tautog4424 11 месяцев назад

simple, turn up pressure till you get the amount of fluid you want to spray, you will still have tails or lines in the end of the pattern, then turn up the air pressure with the fan pattern all the open till the tails disappear. the pattern will blend and you will be ready to spray