Converting DIYMORE 2.42 inch SPI OLED to I2C SSD1309

Подписаться 12 тыс.

Просмотров 6 тыс.

50% 1

In this video I show how to convert a DIYMORE 2.42" SPI OLED display to I2C....its very easy to do.
These displays are 128x64 and run on the SSD1309 chip.
I have uploaded the files here to run these display using I2C interface.
GitHub: github.com/CranialSpongeWorks...
Join this channel to get access to perks:
/ @pcboardrepair
©Copyright 2023 D.C. Boyce. Cranial Sponge Productions.
--------------------
SUBSCRIBE ON RU-vid
--------------------
GitHub: github.com/CranialSpongeWorks
Please Rate - Comment - Subscribe
#@pcboardrepair #pcboardrepair #cranialspongeproductions #electronics #diymore #tzt #SSD1309 #oled #convertspitoi2c #electronicsprojects

Хобби

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 13

@drteletubby Год назад

You sir are a savior. After over an hour fiddling with one of these boards and the u8g library (to no avail) you have solved my issue, turns out the adafruit library is the answer. Thank you!

@PCBoardRepair Год назад

Welcome....thanks for your comment

@demophys4883 11 месяцев назад

Thank you for this video, it's really helpful. If I may ask, at what temperature is your hot air blowing? I want to make sure I don't make PCB toast . . . thanks!

@PCBoardRepair 11 месяцев назад

380C

@enveleptionstudios8711 Год назад

Already this is very helpfull, thank you. Now I have a slightly different board whcih states R4 for SPI and R3, R5 for IIC. Unfortunately I do not have a "switch" type of connection like your R8 to R9. Would I therefore need to remove the connection of R4 completely and simply connect R3 and R5?

@PCBoardRepair Год назад

I would try that

@enveleptionstudios8711 Год назад

@@PCBoardRepair Did exactly that. However since I'm not a master of the craft I was unable to remove R4. So I simply connected R3 and R5 with some solder and it worked as an i2c connection despite the R4 resistor still in place. Thank you

@PCBoardRepair 10 месяцев назад

Ok ... thanks for that piece of info

@REEFPizza Год назад

Hi, I have bought the I2C native version of this display, SSD1309 chip, but nothing show up... I managed to get to work with another library, but i need this library for this purpose. Any help would be appreciated

@PCBoardRepair Год назад

Its very simple