🆘 Support the channel with money: www.donational...
ЮMoney - 4100 1236 8025 03
MIR - 2204 1202 0070 8184
📜 TELEGRAM - t.me/brother_live (Subscribe before RU-vid is banned!)
📜 rutube.ru: rutube.ru/chan...
📜VK - clips/b...
📜 dzen: dzen.ru/brothe...
#diy #шурповерт #модгин #сделайся
In this video I will show you how to give a second life to an old screwdriver, turning it into a modern tool with USB charging and batteries from electronic cigarettes.
FNIRSI HRM-10 Tester Tester alii.pub/713g4...
Soldering iron, 100 W, HS-01 alii.pub/713g5...
------------------------------
USB booster charger/ 2s, 3s, 4s: alli.pub/6xfm1...
Charge controller 1s alii.pub/713hk...
BMS 2S 3S alii.pub/713hh...
THE MOST IMPORTANT THING is that now you don’t have to buy batteries!
Use interesting batteries for: Powerbank, flashlights, remote controls and other gadgets that are designed only for batteries.
The module on the TP4056 chip - a Li-Ion and Li-Po battery charging controller for 3.7V with a built-in temperature sensor, this is a complete product with a linear charge based on the constant voltage/constant current principle for single-element lithium-ion batteries.
The controller allows you to charge the battery with a current of up to 1000 mA (depending on the current-setting resistor)
TP4056 automatically completes the charging cycle when the voltage on it reaches 4.2V and the charging current decreases to 1/10 of the programmed value. The module has an indication of the charging process. When charging, the red LED lights up, and when the battery is fully charged, the green LED lights up, while the red one goes out.
The device starts working when you inhale, that is, when you take a drag. There are two compartments inside the cigarette body. One compartment contains a battery that provides voltage for heating, and the other compartment contains a cotton swab with nicotine liquid wound around the heating element.
23 сен 2024
