Cookology CDD600BK 60cm Kitchen Downdraft Extractor Fan includes motor. Review. 

Great video, helped me realise that it won't fit in my cupboards. Thankyou!

This is really useful to know

Thanks for this

so fancy and usefull

Hi Aaron. I hope this post finds you well! Thanks for the video. I was really interested as you have vented under the floor and outside which is what I will have to do. Is your ducting under floorboards or have you had to use a rectangular profile duct in the screed? Thanks again. Scott.

Brilliant video. Very informative. Do you remember how big the box was when you had it delivered? Also my cupboard in the island is 800 wide x 300 deep. Would this be big enough to house the motor? Thanks.

The price (compered) to others is very good. However, if you considering buying this one it has energy consumption D, meaning you will spend around 90kwH annually. Btw its the same extractor as Royal Flush Downdraft of Klarstein, don't know why its branded Cookology.

Did you find it difficult to remove all of the blue protective plastic from around the top of the extractor Aaron ?? Our fan sounds like something is stuck in there - is this easy to get to - to have a look. Many thanks

Hi Aaron great review,thinking of getting one.Any problems so far.Going to fit it similar to yours.What size and shape of duct did you use under the floor.Also you mentioned extractor at the outside vent .Is there there 2 extractors needed .

How is this kitchen and dining table layout working for you? I'm looking to do something similar, and on paper it looks great.

Hi Aaron, thank you for the very helpful review. How effective it is in taking cooking smells out - I am thinking if you are cooking bacon or sausages in the rings closest to the extractor. Thanks! Tom

Hi, good video. I’m putting into an island 950 wide with drawers in front and a 290mm wall cupboard behind. Not sure if it will fit into the 290mm cupboard?

Thanks.. Is it still working well? Thinking about getting one..

Still working okay.? Thinking of getting the recirculated version.

Hi Aaron, I fitted one 2 months ago now and in the last week it’s stopped going to hole way down There’s only a 3mm gap but really annoying have you ever had this?

I’m looking at buying this downdraft except it’ll be the 900 version. Have you had any issues with it since installing it? What’s it like at collecting steam from the front zones of the hob? I’m imagining not great but I’m sure they’ll all be like that!

Hello i am thinking buying the 90cm, does it come with blower is it ready out of the box ready to work or do i need extra parts? Just saw now u can recirculate do you know how? Its a carbon filter

Not sure if you can help me with this but my fan keeps turning off mid use, is their a fix for this?

Im subscribe you channel and like

Hi Aaron, is this still working for you and have you had any further issues. I am thinking of ordering one and it will be orientated like yours with drawers at the front and the motor at the back. I noticed in a previous comment that you stated that you put yours in a 450 mm deep unit and you had 50mm left, but this seems to be contrary to the measurements i have been given,...can i ask, do you have the unit flush against the back of cupboard or is there a gap ?,.. its just that according to the sizing diagrams the thickness of the unit that houses the extractor (the bit that pops up) is 88mm, and then the motor that juts out is 260mm,.. for a total width of 348,.. is this not the case ?,.. my back unit is 370. thank you in advance.

Can you fit it in a900 work top with hob

Do u install pipe outs or u use filter ?

Where is the air released to?

Good video but it sounds quite noisy

Its crap compared to the downdraft ones

Very very loud.