Cooler Master NR200P - Full Build!

Подписаться 6 тыс.

Просмотров 247 тыс.

50% 1

Sit back, relax, and enjoy this full build in the Cooler Master NR200P. Case appears at 1:36 !
I will be updating the cooling configuration in this build soon, so subscribe to see that!
This was a fun build! I recommend this case to anyone with a low to medium budget.
I mounted the triple slot GPU with a 2 slot bracket from EVGA. I had to grind down the bracket in order to do so.
Please comment with your questions and I will answer them.
Specs:
CPU: Intel 9700K
GPU: EVGA 2070 Super XC ULTRA Gaming
Motherboard: Asus ROG Strix Z390-I
RAM: 16GB Corsair Vengeance RGB Pro 3200 mHz
PSU: Corsair SF750 Platinum
CPU Cooler: Deepcool Gamerstorm Castle 240EX
Fans: 4x Corsair LL120 RGB White
Fan Control: Corsair Commander Pro, Corsair RGB Fan LED Hub
Storage: 500GB Samsung 970 EVO, 500GB Samsung 970 EVO Plus, 1 TB Samsung 860 EVO.
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Temps:
(Tests performed with tempered glass side panel on)
-ROG CPU-Z stress bench 15 minutes:
CPU: 74°C (intake fans @ 1300rpm, exhaust @ 350rpm)
-Furmark 1440p High 15 minutes:
GPU: 81°C (intake fans @ 1300rpm, exhaust @ 350rpm) (GPU fans at 49%)
Sustained boost clock: 1650 MHz.
-Heaven Benchmark 4.0 1440p High 15 minute stress test:
GPU: 83°C (intake fans @ 1300rpm, exhaust @ 350rpm) (GPU fans at 49%)
Sustained boost clock: 1905 MHz.
Benchmark: 146.5 FPS, Score: 3691
All tests performed separately
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Music (in order):
1. Lakey Inspired - Better Days: / better-days
2. Yomoti - Before Chill: / before-chill
3. _91nova - Air Plants: / air-plants
Thanks to these artists for making great music!
Watch my Ncase M1 Build here: • Ncase M1 V6.1 Build - ...
Watch my Sliger SM580 Build here: • Sliger SM580 - Full Bu...
Watch my Phanteks P600S Build here: • Phanteks Eclipse P600S...
Subscribe to see an update to the cooling setup in this case!
Contact me: Subdubbin@gmail.com
Thank you.

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 342

@zackuracy954 4 года назад

Having a close up view of a build in this case has answered so many of my questions, love the work.

@SquishyFletcher 4 года назад

Every time I see a build in the NR200 I am amazed at how much can be squeezed into it, without it causing major airflow problems. Sweet build, and sweet tunes, beautifully done.

@shaleshsundram 4 года назад

One of the best cable management I've seen on the nr200p by far

@KyranOh 3 года назад

Upvoted because this is so unbelievable helpful to see how someone cable managed their nr200. I will be aircooling my cpu, but this is still extremely helpful to see where you routed cables and how and where you ziptied stuff. Thanks!

@lunchbox6744 3 года назад

best part is when you show us your mistakes so we dont makem !

@CRUASSANFAN 3 года назад

Yeah, such as buying rgb watercooling that will be hidden behind the videocard, and those goofy ass rgb fans xDdddd

@fellowasp6768 3 года назад

@@CRUASSANFAN gotta balance it out man all minimalist like !

@mechanicalmanical 3 года назад

I appreciate you leaving in the undo/redo. Impossible to avoid that with the SFF. I’m inviting the buyer’s remorse watching builds in this case. I just built my first pc in a Thermaltake V1. If I could have found a SF PSU close to retail, I would have gone even smaller. I paid slightly over retail for both my CPU and GPU. The markups on the SF PSU were just a bridge too far-some were almost double retail! Anyway, good stuff. Nice and chill half hour. Appreciate it.

@mikeymaiku 3 года назад

yes, i cant beleive sfx power supplies are hitting nearly 350 canadian (at least the coolermaster 850w)on amazon from the scalpers and the demand of SFF builds today.... yet you can go to a place like canada computers and order the same one for 212 before taxes lol

@nonamewizardemporium9226 4 года назад

I get why this bass is so seductive, it's the cable management!

@Craig-ib7gk 3 года назад

Really nice video work. My only bitch about this case is the mandatory bottom-mount of the rad kit for a 240mm AIO when running a vertical GPU configuration. You could not pick a *worse* place for an AIO radiator. than the lowest point in the entire rig, regardless of fan direction. *All* AIO loops have a minimum "acceptable" amount of air in in the lines, and that config ensures that air will settle in the worst place possible for an AIO: the pump, which ultimately leads to pump whine and premature failure. I would have much preferred if they allowed the 240mil rad+fan deck to be swappable to the top of the case, allowing top or bottom to host the rad. It would have been extremely functional in this build, and still allow for mounting just fans on the bottom. It would have also blown through the price point they were shooting for, so I can understand the reluctance, but it would still be nice as an option.

@mmyrvold5494 2 года назад

The radiator pipes is on the top, not the pump. He ran the pipes around the pump so all the air will be in the loop not the pump :) And in this case u cant mount the rad in the top if u want fans on it :((

@awts 4 года назад

Very clean build I love the camera angles it felt like I was building it with you.

@rassles 2 года назад

This video saved my life, thank you amazing human

@TheHulkminator 4 года назад

Dude!!!!!!!!!! you have no idea how much you saved my ass now! I am doing that same build and never knew that you can mount a triple slot card your way, I got a 280mm cooler and made my life living hell, definitely going your way, the finest NR200 on the web

@Subdubbin 4 года назад

Thank you! Glad I could help. Just know that you will need to grind away part of the 2 slot bracket in order to make it fit.

@Subdubbin 4 года назад

Also, I don't think you can vertically mount a GPU with a 280mm aio in this case. You will probably need a 240mm aio.

@dougalm8704 3 года назад

Put the CPU rad at the top, you want any air pockets in the rad not the pump / block

@wb3123 2 года назад

Detailed video and also props for showing your mistakes and not editing it out.

@ragemydream 4 года назад

This was so amazing and detailed. Please do more like this. I've been wanting this case for ages and I like that you put the AIO at the bottom. It is definitely cramped in there, the cable tidying was meticulous.

@kaiseralbrecht6099 3 года назад

Yeah. I hate when the pump doesn't have the sound of air in it and it is smooth and efficient.

@MrEvilKnevel 3 года назад

I have one major complaint. Don't mount your AIO is that way. Depending on how full the loop is and on the pump design your pump could run dry and your AIO might fail within the next few months. besides that its awesome.

@MXALOVE Год назад

luckily warranty lasts over 2 years

@emreproxtr Год назад

He put the tubes higher than the pump. So, the pump isnt the highest point of the loop, there is nothing wrong with this

@AGhoreyshi 4 года назад

Awesome looking build! Definitely watching this when I finally get all my parts together, including the nr200

@NBWDOUGHBOY 3 года назад

Man! That might be the fastest boot to desktop I've ever seen that literally took like 5 seconds. That 970 pro is no joke. And the 980 pro is even faster i can't even imagine

@Subdubbin 3 года назад

The magic of editing! In reality it takes a little bit longer.

@EternalTotem 3 года назад

I bought this case. I would have so watch this video if I knew about it ahead of time. Thank you for such a well video. Highly recommend for any owners and future owners. I may actually may do a tear down and build it up again

@Keshawn522 4 года назад

I honestly love how this build turned out, not to mention that the music was very chill. Definitely re-watching this when my case comes in.

@alanyammine9764 3 года назад

For an ITX format, with a non-modular PSU, 2070 Super and AIO as CPU cooler, this cable management is really good. Nice video btw. Mesmerizing music, a close-up point of view and the attention to details.

@PavelSekerka 3 года назад

But SF750 is fully modular with very flexible cables as well. I have the same combo (NR200P and SF750 PSU) and it's really a breeze to work with...

@alanyammine9764 3 года назад

@@PavelSekerka Oh is fully modular, you are right. I could swear it was non-modular. If my eyes do not deceive me, I think he connected unnecessary cables . Still a good build and video, in my opinion.

@Evmyskov 3 года назад

That AIO mounting is absolutely incorrect. Radiator should be up and hoses down.

@lakato115 2 года назад

That graphics card is a beauty

@debaohuang1085 3 года назад

Your video helps me a lot. Thanks

@Subdubbin 3 года назад

You got itttttt

@WhiteGold251 3 года назад

**Gamers Nexus Has Entered The Chat**

@Subdubbin 3 года назад

Yes, yes... I am uploading another build in this case with a side-mounted 280mm AIO this week. GN approved this time! Stay tuned for that.

@aliancemd 3 года назад

AIO gurgling like AIO gurgling but that GPU says “Ow yes, choke me baby” 🙂

@eriknesh4085 3 года назад

@@Subdubbin Is it really that bad the way its mounted in this build?

@kaisarantonn7225 3 года назад

Im curious to see the temperature when the glass panel is closed

@johnnyr-518 3 года назад

Not good. However, you can use it when you're doing a non-heavy task or playing non triple a games. If you're doing a heavier task, it's best to used the mesh side.

@stevidente 3 года назад

Great cable management but mounting the radiator at the bottom is not recommended because the residual air in the AIO will accumulate in the pump, causing pump noise and shortening the AIO life.

@Codyli 3 года назад

Thank you bro this is just what I need!

@jeymieberrios9520 3 года назад

Best PC Builder video creator out there, amazing edit, clean building just awesome. Keep up man. #subscribed

@AniketSingh-hr8mi 3 года назад

so good

@jesep3663 3 года назад

The quality of your content is so good! It seems like I am watching a channel with a million plus subs! Keep this up and you'll get there 👍

@wowtechinc.1553 3 года назад

incredible build

@buddatech 3 года назад

Love this video excellent job great camera quality and lighting soothing music all around A+

@genshindragonnest 2 года назад

Watching this made me want to have an ITx build. But since I have a mATX board, I just went with an SAMA Im01/Tecware Fusion.

@swo0shhs0ows80 3 года назад

Great video. Will be using this as a reference when building mine. Thanks

@SteebRNR 3 года назад

I LOVE IT

@Tolard49 3 года назад

This case looks really great and a 3 slot GPU space is awesome, that lacks on my current Evolv Shift Air. Trully awesome video man!

@maverick4520 3 года назад

You deserve more subs bro! Nice video!!

@flyordieinafire 4 года назад

Thank you for taking the time to make this even with your mistakes (as you are human it's nice to see) it's been a wonderful watch!!!

@sudgaikwad 3 года назад

Looks decent. You may encounter high temp 🔥 on cpu and GPU due to AIO position. Just alter the AIO.

@albertocarrillo9187 4 года назад

Love the video! I just got my NR200P and was planning similar build with rgb fans but thinking about going with Scythe Big Shuriken 3 CPU Air Cooler. You got my subscription!

@Subdubbin 4 года назад

Thank you! I think big air coolers look cool in this case.

@albertocarrillo9187 4 года назад

It’s actually the low profile one. I was hoping to see thermal with gpu and air cooler back to back. Since I’m planning to vertically mount like yours

@Subdubbin 4 года назад

@@albertocarrillo9187 oh gotcha

@pease1899 3 года назад

@@albertocarrillo9187 I recently found a benchmark with the vertical gpu and that same cooler and thermals were very bad if you going with the low profile cooler id just recommend not going with the vertical gpu.

@albertocarrillo9187 3 года назад

@@pease1899 Thanks. I have parts ordered. Cant wait to kick off the new year with a new build.

@StevenCastellucci 4 года назад

Great job, and excellent video! I order an NR200 in August, and it's still on backorder :)

@Subdubbin 4 года назад

I ordered mine in June and got it in September.

@cianwalls7560 3 года назад

glad im not doing an AIO for this build. Ik it gets me so much better temps and quietness but im not OCing so i dont rlly have to worry about that. its just 1 cable for my can and thats it

@aficionadohiend 2 года назад

great build

@farhanalgemasi 3 года назад

Deserved subscribe from viewer.. good camera angle for viewers.. .

@iokaravas 3 года назад

Even at 2x , this is awesome.

@TheLdoubleE 3 года назад

Nice cable management and clean build, but blocking off the CPU cooler pump and most of the RGB RAMs seems like such a waste lol.

@mebeingme947 3 года назад

Very nice looking build and nice somewhat relaxing video with the music with it. Only downfall I see in this is the aio radiator in the bottom. This might couse pump noise and probably also an issue for the pump lifetime.

@BrainLeisure 3 года назад

That is a tight fit ! Subscribed :)

@gucky4717 3 года назад

AIO: Bottom Radiator with Pump at highest point will make bubbles float towards the Pump, thus increasing noise and decreasing Pump Lifespan....I had an AIO Model which Pump got killed within 3 Months with such config. I had 3 Pumps die that way (in 2017 before GN made their research)... That's why it says the bottom Radiator is recommend only for Customloops on the Productpage of the NR200.

@Subdubbin 3 года назад

See my updated build in this case! GN approved.

@gucky4717 3 года назад

@@Subdubbin Haha sry. I was looking for NR200 Builds and RU-vid recommended this Video.

@MorkaiAU 3 года назад

Love your work mate. I've got a black NR200 coming at the end of this week with the same SF750 PSU. Already got a B550 board, RAM kit, Arctic Liquid Freezer 2 240mm, SSD and fans on my desk. Just waiting now for the new Ryzen 5800x to drop.

@Subdubbin 3 года назад

Nice. Good luck getting the new processor!

@fernandogamez5270 3 года назад

This build looks clean!

@Chugs4Serotonin 3 года назад

I wouldn't have put that radiator at the bottom. Any air in the aio is gonna move up, in this case where the pump is. Especially over time as more liquid permeates the loop causing more air to enter. Otherwise, great build!

@sabrid54 3 года назад

Would an aio like the pure loop 240 from bequiet fix this issue? The pump is located near the radiator between the tubes.

@Chugs4Serotonin 3 года назад

@@sabrid54 it would eliminate the problem for the pump, yes, but you'd still have air hanging out where the heat fins for the coldplate are, affecting water flow through the fins. Also, if you front mount a radiator, make sure the tubes are coming from the bottom, not the top, otherwise air will sit at the top where the tubes meet the radiator, affecting water flow to and from the pump. Orientation doesn't matter if you top mount the radiator. But yeah, air always wants to move to and stay at the highest point of the loop, so just keep that in mind Basically... Top mounted - doesn't matter, it's fine Front mounted - depends on orientation Bottom mounted - bad idea Side mounted - fine as long as the pump for the aio isn't above the radiator, (still not ideal tho if the radiator is horizontal, because you really want air to be on the side of the radiator opposite of the tubes, vertical side mounting like in an O11 dynamic is fine tho, same as front mounting) Rear mounted - same as front Hope this helps

@technic 3 года назад

How would you fix that problem in this case then? Just wondering because I’m doing a similar build

@Chugs4Serotonin 3 года назад

@@technic its still not 100 percent ideal, but I'd side mount it. Lose the tempered glass panel and use the mesh panel if you have the model that comes with both. You won't have air anywhere near the cold plate which is fine, but ideally, you want air to be in the radiator, specifically the side opposite of where the tubes come out. That's the only place to mount it tho besides the bottom, which is the worst way.

@technic 3 года назад

@@Chugs4Serotonin Yeah I was planning to do the glass panel and vertical gpu mount which really leaves like no other options so I'm not sure what to do now

@Ansowhat 3 года назад

How do you not even have 1k subs this is the best build video I’ve ever seen better than TechSourse or LTT

@d3gm4n16 3 года назад

You are going to increase the pumpnoise and wear by mounting it in the bottom of the case. Watch Gamers Nexus video on the matter. Otherwise nice build!

@Subdubbin 3 года назад

I have watched that video. I am uploading another build in this case using a side-mounted 280mm AIO this week! No more GN comments hopefully lol.

@zeuslgn 3 года назад

Lessons learned as I built mine: 1) Use Noctua slim 15mm fans for top and bottom, 2) use an SFX - - not SFX-L - - PSU with flexible cables, particularly if your GPU is a titanic beast.

@Subdubbin 3 года назад

The 25mm top fans fit fine. Why did you need slim fans on top?

@zeuslgn 3 года назад

@@Subdubbin My pre-existing RGB RAM has a weird wing shape that jams ever so slightly into the fan just above the motherboard's left side. It's also a close shave with the cables and PSU just under the top right side so I ultimately opted for the extra space from the slimmer fans.

@meikokaisuke6142 3 года назад

i don't understand why you replaced the included sickleflow fans with LL120s. The sickleflow performs much better compared to the LL120.

@chrisandrew_tv 3 года назад

Curious to understand why you chose to pull air through the hot radiator into the case? Does this pull config yield better temps?

@lantern214 3 года назад

And it starves the pump in that orientation

@davidcco 3 года назад

the watercooling at the bottom is pretty much the worst u can do, it can lead to air in the pump and damage to the watercooling

@iceddz 4 года назад

I'm surprised you got that right side panel on with the cables managed like that. I had 1 small flat cable sticking out on that side that prevented the panel from staying closed well. Had to completely re-route it so that no cables were really on that side to ensure that panel would stay closed. Also! Highly recommend trying the AIO radiator side mounted, with the GPU in the standard configuration and with the vented side panel instead of the tempered glass. That coupled with intake fans on the bottom and exhaust on the top, makes for a hell of a cool system.

@psb291 3 года назад

This is how I'm building mine now, but I'm struggling with the cable management.

@iceddz 3 года назад

@@psb291 cable management takes awhile in this. For sure. I put it together a few pieces at a time to see if it will all come together and multiple times it didn't and I had to back up and reroute cables, move components (SSD, fans to have cables starting on a different side, etc). I just added a Corsair Commander Pro to the build tonight, and it's so much better than just fan splitters everywhere! Stays cooler too since I've got more control of the case fans.

@psb291 3 года назад

@@iceddz good idea. Don't care that much about the RGB since I don't have a glass panel but from a cable management perspective I think I'll pick up a cheaper hub.

@JcMacxx 2 года назад

Why does your radiator fans not blowing the radiator? is it effective that way? I thought the fans should blow air to the radiator to help dissipate the heat?

@eyanghongbin0315 3 года назад

I'm wondering if the fans for the water-cooler are installed up-side-down. In this way they suck the warm air into the case instead of blowing out, isn't it?

@tomasdiazvelez5822 2 года назад

yep i was reading comments to check if someone else noticed. The purpose of that coolers is to put some air into the radiator. I think the best option for this setup its to mount the coolers down, sucking air from the bottom, and above the radiator.

@NancyQuirozcartoonboom 2 года назад

Before watchin' the video: I want it :D Me watchin' the video: OMG o_O ¿? Watchin' the prices: OMG D: !!!

@Wizzkid1984 3 года назад

Well here is one big mistake that's mounting the AIO rad on the bottom. cooler master recommends only mounting custom water cooling rads to the bottom of this case, if you guys take the time to read the paperwork that comes with the case you would know this.

@julienredfox7489 3 года назад

Yes. Pump always same level or bottom of rad...if not...bubbles...and pump die faster than others...

@Subdubbin 3 года назад

I did another build in this case that addressed that problem. You are correct though.

@itsme81912 3 года назад

Beautiful build but dunno if I could handle all the extra cable management just for RGB myself xD I'd just use the non tempered glass side panel and screw RGB off haha.

@D1craigRob 3 года назад

Cant wait to build in mine. Not looking forward to cable management though. I'm shit at that anyway.

@RedzRojas 4 года назад

Great build... More power!

@Subdubbin 4 года назад

Moooore power!

@RedzRojas 4 года назад

@@Subdubbin thanks for the cable management ideas.. btw does the gpu sag in vertical orientation?

@Subdubbin 4 года назад

@@RedzRojas it does sag the slightest bit. Nothing to worry about. It's barely noticeable.

@dylanhagsauce8629 3 года назад

Music is swag

@gabrielvieira1864 2 года назад

A Rog Strix B550-I Gaming + Ryzen 5 5600x. Would they go down well ?

@Texas2Mexico_Gaming Месяц назад

Just ran into this video. Nice build but yea.... like all other comments, the AIO was installed incorrectly. I know people pointed this out but I had to put my 2 cents as well.....lol

@lilow_yt4712 3 года назад

U are really underrated

@nigelluo5065 3 года назад

Do you think the NR200 could fit in with a ASUS RTX 3080?

@wapperjaw8282 Год назад

*TU!* I must have built a 100-computer system or so in my lifetime and had no problems whatsoever. So I skip a step of the building process saying to myself why prebuild it, out of the case this time? I mean I never had a problem before ... Guess what happened??? The very first time I have a problem with the motherboard not posting. Crud ... it looked dam pretty ... 😭😭😭

@FlowTrax 4 года назад

nice build!

@lucaslaw5883 4 года назад

great build with the nr200p - would you be able to post a link for the 2 slot GPU bracket you used in the video as I’m having trouble finding it in stock anywhere..thanks in advance

@Subdubbin 4 года назад

Google: EVGA 2 slot bracket

@deeznuts5034 2 года назад

Thanks for the build! I'm alittle late to the party but looking for an itx case with 240 radiator support and this video really helped!

@ayoadebiyi6121 3 года назад

Why are you pulling hot air from the radiator back INTO the case???

@techwatchlist 3 года назад

Great video! I didn't even think I had to *somehow* take my GPU apart. Thanks for that! How's the thermal performance? I'm thinking if I could get away with a build without Deepcool.

@danebeee1 2 года назад

Uhhh I thought mounting your aio like that was a big no no?? The radiator is supposed to be either besides or above the pump or else it can cause a lot of issues or even make your pump fail.

@aahherera 3 года назад

Hi!!!! Amazing cable management!!! This video has answered a lot of questions.... Only 1 remains.... Can i fit a 3.5" hdd on The front panel?

@istillrephawaii808 2 года назад

saw the other build video! why not do 4 intake fans at the bottom or did you not have enough space?

@Ennoori 3 года назад

Pump is higher than the rad, air bubbles will get stack in it

@Subdubbin 3 года назад

Check out my "Gamers Nexus approved" build in this case with a side-mounted 280mm AIO.

@petrthingsilike8487 3 года назад

I just learned this setup has one MASSIVE FLAW. The radiator is bellow the pump/cooling plate of the processor. Which means over time the air will accumulate in the pump and that means less liquid cooling the processor and also the life span of the pump will be maybe two years instead of 4-5. I am planning similar build in this case, so I am thinking to put the radiator in the top of the case rather than the bottom.

@Subdubbin 3 года назад

See pinned comment

@pocpc1788 3 года назад

Nice XRs!

@J0ty 3 года назад

Very nice build! And enjoyed the music as well! I'm planning to do more or less the same build, with an triple slot GPU as well. I'm wondering did you get the double slot bracket with your EVGA GPU, or did you order them separately? Is it for manufactures standard to sends a bracket together with the GPU? Thanks!, keep up the good work!

@Subdubbin 3 года назад

Thank you, I ordered the 2 slot bracket separately from EVGA's website. I had to grind down part of it to get it to fit.

@KAPhotography 3 года назад

I just want to ask if your radiator has gurgling sound because of the orientation. Other says that when you mount the radiator in bottom it cause high air pressure. The reason why they suggest to put it in top mount but in this case its not possible to put in top mounting for radiator. Please let me know because this is the exact build that i want. Thank you

@Subdubbin 3 года назад

I never had sound issues with the cooler in this orientation. I recently changed the cooler to a 280mm AIO. Check out that new build on my channel! I would suggest doing the 280mm AIO instead of a 240mm.

@noct7779 3 года назад

Hey, where can I mount 3.5" HDD? great build!

@NomadCanid 3 года назад

if you don't go for a vertical gpu or the tempered glass you can put a 3.5" HDD on the side bracket, although in that configuration you would not be able to fit a 240 or 280 AIO

@pleaseenteraname163 3 года назад

Great build! Why get rgb ram when your gpu is gonna cover it tho?

@ybae 2 года назад

Awesome video, I think you've inspired me to change my build to a very similar one to yours'. Any chance you did temperature tests with the vented panel ?

@KZ-hb2hm 3 года назад

cleannn

@andreacustica9316 Год назад

I did almost the same build you did in this video and I am having an issue, every time i plug the CPU to PSU cable, the build turns on, and turns off after 3 seconds. When I unplug the CPU to PSU cable, the build turns on and stays on. Any idea what am I doing wrong?

@TheFatCarpBaitCo 3 года назад

This case is sold out everywhere in the UK

@san.cochado 3 года назад

I'll definitely be mounting the PSU and installing the riser after everything else. What's the purpose of the tie at 10:50 other than placing needless strain on the front panel connections?

@PrenankPhule 8 месяцев назад

how much did it cast to build full pc I wish you could have mentioned it in the video

@APSPase 4 года назад

I thought placing the AIO at the bottom is bad for the AIO pump??

@Subdubbin 4 года назад

And you would be correct. I'm replacing the aio with a 280mm aio which will be side-mounted so that the air is in the radiator instead of the pump. I'll be filming it and posting it, so stay tuned!