COPPER THIEVES STOLE THE WIRING TO MY SHOP... 

This is P blaster straw lmfao

Next episode- “I TURNED THE 73 INTO THE FOX BODY”

4 minutes in and I can't stop noticing how healthy and fit you look bro, great job

Video: Starts with Dan pulling wire. Video: Ends with Dan’s wires pulled.

As an ohio resident, yes it is still a thing. At least in the dayton area.

Hang on, I subscribed like 5 years ago when this guy was just messing about in his garage and I come back and he had a full shop and 1m plus subs wow.

"I'm gonna use the one with the guard" *Proceeds to use one without a guard*

20:05 that was priceless

"It's still not a project car" 🤣😂🤣

I know you don’t really even care about popularity but you’re seriously underrated for the content that you put out bro.

I've been watching for like 5 years and I'm so glad you went into doing random car shit instead of just moto vloggs. Makes it sometime new to watch.

Did anyone else have old memories of people roasting Drew Carey when Dan said who's line is it anyways?

If this man doesn't bring back those cooking series with that one guy

I just wanted to say, im proud of you for wearing your ppe. All these young pups forget to and yes, it may not hurt you now, but years down the line all the shit you put your body through adds up

They did all the dangerous ass shit to cut the feeders out and then just left all of it 😂😂

“I paid way too much money for this car.” I said the same thing to my father who bought a ‘67 Firebird from the same place. Guy told us “it’s the best paint job” he had ever seen. I’m no painter, but rattle can quantities of orange peel and literal runs in the paint don’t seem quality to me.

18:44 "I dont even wanna touch it because it's big thick" lmao

Is there gonna be a veduc this year ?

2 minutes in and I hear no censorship, love this difference from the past 2 videos, just seems more raw and unfiltered.

Meth heads will steal anything, case in point they did this kind of thing at a power substation here in AZ near my neighborhood. It was short lived though.... One of em got fried....

I've been watching Dan for a few years now, and honestly I think the thing that keeps me watching is that when he sets his mind to a project he'll get it done (in a timely fashion is a different question) and that inspires me.

The last time I came this fast was prom..

6:18 you could tell how you really got the bolts loose. Heated them up then throw water on them

They f****** stole the copper wow that's a low ball move on them, Sorry that happened Dan maybe some outside lights for a low-budget security system would do good, something to scare off the bad guys

+1 on pblaster, we use it at my shop. When you hit that rusty bolt i thought "man he should hit it with some pblaster". Sorry about your guys power.

14:06 Dan's sideburn looks like the outline of a saxophone

Love your attitude and humility man. It really helps to see people like you

Danny, have you entertained the idea of getting a small portable sand/walnut shell/ glass bead blaster? It would really help you save a lot of time on many of your projects. Just an idea. Love what your doing man. Thanks for the content!!!

"I paid way to much for this car." Dan's catch phrase.

Having a bad day just watch sum Dan he’ll do ya right 😂🐐💯

We Miss “Sharpie Bike” Do It With Dan!!! When We Didn’t Even Know What You Looked Like And Always Ended Your Videos With Jax!!! ♥️🤣

I’ve never wanted PB Blaster more in my life!

i been havin a real rough time and the moment i turn on your videos while eating i just forget about shit. love this dude.

8 years in and i still laugh every time I watch your videos man.

I'm glad to see you in good health, and that pivoting straw design is genius 🙂

Man that's what I'm talking about Dan you're back with them banger videos keep up the good work I truly enjoy watching you're videos you're funny af

Since you dont wanna go too crazy with it, put subframe connectors on it will stiffen the car up significantly and theyre like 200 bucks, weld in or bolt in.

"I put that right up there with the light that's under the hood of my truck." ...you mean the one that doesn't work?

Explaining to yourself about how you want your car is so difficult when your stoned to the bone lol

Love the rawness of this video bro. Channel keeps getting better

I just started using the blaster line of products last month for issues with 18 wheeler trailers

Watching Dan rip his pants reminds me when he ripped his pants on the F4i in a Walmart parking lot or something 😂

i like the ''bloopers'' at the end.. and the rest of the video too

Fix it turn ups the amps and make sure the disconnect is inside and have a fake disconnect outside so they die

Hey man, get the Vintage Air setup that goes entirely under the dash. I’ve got it my 79 and love it. Also gives you enough engine bay to fit a Big Block and a pair Whirly Bois

It seems like with the 73, you are after something along the lines of Mike Finnigan's El Camino. just a super simple, super clean car thats a blast on the back roads but you can pull up to any car show pop the hood and people will be drooling over it

That cap/straw for the PBlaster sounds like it’d be good for spray painting 🧐

The bloopers at the end are fucking hilarious. Killing it dan and ham.

LMAO THE ENDING 😭😂 "Oh shit this is the wrong shit..." Im fucking dead

0:30 Dan that is red XD

I feel like every time I watch a new video, Dan is taking things apart to never be put back together again lol

I bought a can of pb blaster like that and I love it. It sprays a lot! Very nice bottle and good product!

Great video. I’d watch throwing sparks on that paint though. I’m a rig welder and sparks will less burns and small rust in the paint and windows.

Blooper reel was a great addition

Dan, how you feel about shaving the firewall is how we feel about most of your videos 🥺

I Love this Channel U guys are so funny!! Keep up with the good work Dan and good Luck and yeah congrats on that beautiful Vette of yours!!

As far as a cage goes the best advice I can give you is unless you have to have it avoid it. Those cars are pretty tight already and adding a cage takes way more room than you’d expect. If youre shooting for comfort avoid caging it.

Thanks for showing the not so glamorous parts of a restoration. Too many folks edit that shit out like they somehow are too good to have to deal with it. Perhaps they are catering to our lower attention spans. Forgot the point I was trying to make.

I like dan with glasses Makes him look like he knows what he's doing

Long time viewer (since before your bike crash) I just want to say I’m so proud and also you look great!!

Build something that you can always go up with because it’s hard to go backwards.

sorry about the shop:( thanks for the content both of you!

Here in Arkansas we have this thing called a beartrap. Works great for stoppin trespassers😂😂

Already have my pb blaster, love that sheeeeit

Hey Dan that's why you get to 73 Camaros and you take one and full roll cage it race car any other one is structural safe restomod so you have an original one and a race car

gratz on sponsoring, cool vid ;)

Dont make me look like a baby buttt..... I'm just living my best life! Love it bro, should start a 45 sec in every car vid saying this is my garage osha aont here don do my tings! Lmao love ya brother keep on keeping on

just do weld in subframe connectors if you don't want a roll cage (will have to grind off some of the powder coat)

Bloopers at the end of every video!!!

“Who’s line is it anyway” my man😂

It’s been a while since I’ve watched you’re videos, the last video i saw was you putting the lights in the truck with the double tires in the back (forgot the name) I’m glad I’m back, you look skinnier btw

PB is magic in a can

I’m in school for welding and I would love to do the welds on that idk why but it would be awesome to redo all the welds on the Camaro.

16:45 for the part they find out about the copper, no problem 👍🏻

Dan just buy two. One for leisure driving and then one that’s a full on build

Good luck dude

A guy I used to work with was a wire thief in Texas back in the early 2000’s. He told me stories of him and a crew scouting large buildings with lots of power running through. He said a crew of 5 people could break in, cut the power and pull all of the large gauge wire out in about 40 minutes. They would bring a large enclosed car hauler and fill it and run. They would wait about a month and turn it in after stripping it all down to bare wire, this was around the time copper was going through the roof as far as scrap prices go. Sure looks like that was the plan at your shop. One of their best hauls was a large welding shop that had 30+ welding stations. Those assholes not only took all the wire in the walls but they also took all the ground straps off the welders and every power tool in there. I should also mention they were all meth heads so that sort of explains it... doesn’t justify it in any way but meth heads so stupid shit. Those people might be back.

Haven’t watched a video in weeks. You look great . Keep it up

I've been here since the BMW & i've never been this early.... Hi, Dan!

Not gonna lie that fucking ending had me rolling. Congrats on the c8 Dan

Highly recommend the Spongebob "Ripped Pants" ballad circa 2009

Those copper thieves are tryna take that new pink mist challenge huh?

I mean you could try to go with the whole hidden roll cage or the classy integrated roll cage

I wish when I was working on cars I wish I would say “awe...that’s all that was?” No it’s “Are you fucking kidding me! Why would the engineer put that there?”

Jeez Dan sorry to hear about the shop :/ still live the videos brother! 🤙

Good on ya man,getting it dun

Pro touring dan!!!!

i love you dan, thanks for the content.

The whole "whose line is it anyway" joke was noooiccee

Dan, all you need is a robot that throws half inch wrenches at intruders. It is the perfect security system for the shop.

That's a thing in a lot of places including wealthy areas too. My father was in construction both commercial and residential few decades. Amount of times his projects were broken into is mind blowing. Same goes for tools Sadly scrap metal yards that these wires headed out to probably didn't give af

daumn that is crazy... hope they get power out to you soon..

Looks like Dan made himself some easy access pants😂😂😂

Imagine being so broke you need to chop into someone’s electrical to steal the WIRES. BRUHHH. GET A JOB

Wow, finally a sponsor that is selling something that I actually want and will buy. Who'da thunk it?

Yep he has hit his mid life break down🤣

I would have considerd a full respray at that point tbh and a body shop for fixing the rust.

When you were standing out back behind the shop it looked like there was a hoodie or something on the top of the hill

You remember what happened the last time Dan got out a wire wheel and saw some rust?

Next episode I tore the 73 down to get rid of all the rust. Now it looks like the fox body.