Cortina Precision Bullet Sorting Die for Bullet Flow System

Подписаться 34 тыс.

Просмотров 7 тыс.

50% 1

Find it here www.shootsmall...
Find the flat indicator insert here amzn.to/47p6zSA
Check out my website www.fclassjohn.com for more videos, reviews and help
Join Patreon / fclassjohn for full length videos, live chats and more.
Help support my channel by shopping Amazon amzn.to/35YA4h8
DISCLAIMER: This and all videos on my channel are not meant or intended to be viewed by anyone under the age of 18. This video and description may contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support! Videos on this channel are for informative, and entertainment purposes only. Using any of the information is at the risk of the individual using the information. We (including RU-vid) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. By viewing or flagging this video you are acknowledging the above. #fclassjohn #reloading

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@ironair67 4 месяца назад

What ensures that the shell plate is stopping at the same height every time. Do you screw the die down until it touches?

@TMFShooting 8 месяцев назад

Great Stuff John 💯💥💥💥💥💥💥💥

@FClassJohn 8 месяцев назад

Thank you

@tjarmand 8 месяцев назад

heck ya!!!

@jeffb.3052 8 месяцев назад

So you're sorting on length and not weight? I still think for what you all spend on premium bullets, the manufacturer should be doing all this sorting for you and providing them in sub-batches. They could automate all that on the line once they are keepers, just kick out into different bins and bag them labelled with the range.

@adamturnbull1258 8 месяцев назад

@jeffb.3052 I agree with you - I’ve had huge weight discrepancies of late with the top end bullet however unless I get 50 out of spec they can’t (or won’t) do anything. A premium product at a premium price should be a premium standard...

@FClassJohn 8 месяцев назад

Weight discrepancy is hugely overrated. If you take the worst case discrepancy in a 500rd box and run them through a ballistic program there's virtually no difference in impact and BC, if I remember right, the last time I did that excersize it was less than an inch variance at 1000yds. I can tell you that if I wasn't sorting by OAL and pointing I would just load straight out of the box even for with zero hesitation for major matches.

@adamturnbull1258 8 месяцев назад

@@FClassJohn so are you saying that the 1.3gn difference (in same box) is irrelevant and won’t matter and I should focus merely on OAL? Or OGIVE rather than weight? I’m intrigued.....I’m sure you have a video on this also so shall search the archives 😉

@jeffb.3052 8 месяцев назад

@@FClassJohn good to know because I got lazy and quit sorting a while back. I saw zero difference but I wasn't shooting long either and why I asked.

@user-TJ365 8 месяцев назад

I see you’ve flipped you tablet. Did you zip tie the cables behind it so it takes the pressure off the plugs?

@FClassJohn 8 месяцев назад

No I actually forgot, so thank you. I just ran out to the garage and secured it.

@stevehall4248 8 месяцев назад

I’m still getting my system down - just started neck turning & sorting bullets - and pointing bullets is next. I’ve been reluctant to use my 650 for anything other than bulk 9mm and 223 but Erik’s bullet flow system is making me think about it.

@bravoman80 8 месяцев назад

So bullets are sorted by over all length? Not base to ogive?

@FClassJohn 8 месяцев назад

Yep. I haven't sorted BTO in years. Some people do, and that works for them but not for me. I sort to length, point and shoot.

@Vintovka 8 месяцев назад

You want to sort bullets where the biggest variable appears. For most its base to tip. Also longer bullets will have an ever so slightly higher BC which will appear at 1000 yards, so batching by OAL will minimize your vertical dispersion!

@bravoman80 8 месяцев назад

Thanks guys

@zdenkoplese665 8 месяцев назад

Really enjoy your videos. Very thorough explanations plus gems included. Thank You

@FClassJohn 8 месяцев назад

Glad you like them!

@xxshiftlockxx 8 месяцев назад

After sorting, you go straight to pointing? No need to trim to a uniform length first then point?

@FClassJohn 8 месяцев назад

No, I'm not trimming anymore. Just sort and point.

@1340MB 8 месяцев назад

Are you using the Armanov floating lock rings or locking the dies solidly to the toolhead?

@FClassJohn 8 месяцев назад

Neither. I make my own floating rings but same concept.

@1340MB 8 месяцев назад

Nice.

@WeTrudgeOn 8 месяцев назад

It seems like somebody should make a bullet swaging die to make all bullets exactly the same.

@FClassJohn 8 месяцев назад

Tough to swage bullets without risking jacket delamination or deformation.

@KS_Penetrator 8 месяцев назад

I have a Corbin swaging system to make my own jacketed projectiles, you’ll never be exactly the same for all projectiles. If I can maintain within a one percent variance weight/length I’m happy

@WeTrudgeOn 8 месяцев назад

@@KS_Penetrator What did do make the jackets from?

@KS_Penetrator 8 месяцев назад

@@WeTrudgeOn I’m currently buying from a distributor but in the future when I get tooled up I’ll be producing my own from coils of copper

@WeTrudgeOn 8 месяцев назад

@@KS_Penetrator That is pretty cool. I'm a retired tin knocker. I've worked with thousands of pounds of sheet copper over the years. Are there several steps in jackets with annealing in between?

@farmboy2848 8 месяцев назад

What happened to strait 284?

@FClassJohn 8 месяцев назад

It went bye bye about a year and half ago when Lapua temporarily stopped production of the brass but to be fair, I'll never go back. The 7prcw is just too dang versatile for me.

@charlesinscore4107 8 месяцев назад

Is this sizing the O drive?

@FClassJohn 8 месяцев назад

This is simply measuring the overall length

@tonydevich7937 8 месяцев назад

Do you point first

@FClassJohn 8 месяцев назад

No I don't

@tonydevich7937 8 месяцев назад

@@FClassJohn thanks for the info

@robd.5263 8 месяцев назад

Hey John whats on top of the primer tube?

@FClassJohn 8 месяцев назад

I add a weight to ensure the primers are pushed down with a little extra so that no primer is missed. Because I have the autodrive running I have to make sure a primer is loaded onto the primer slide every time. I'm actually going to make a newer version that's even better soon.

@theturkeysopinion 8 месяцев назад

@@FClassJohn much needed. The primer system is the major fail point imo for dillon/mk7. Gosh that can that thing jump when a primer is screwy. And it gets on a roll of missing them and makes a total mess. 🙄

@FClassJohn 8 месяцев назад

@@theturkeysopinion Once I have a better system for the primer tube I'll do a video. But I can tell you just doing the weights has helped immensely but it's a real balance to keep it from breaking the rod when all the primers are in because of the flex.

@theturkeysopinion 8 месяцев назад

@@FClassJohn awesome. Looking forward to it👍👍

@andrewmack7160 8 месяцев назад

⁠⁠@@FClassJohn I was having to watch the last couple when priming on mine. I added a 45acp case with an area 419 funnel head tapped to it. So far seems to be working good. Was afraid to add too much weight to it.