Couldn't believe how HUGE of a difference this made

Подписаться 377 тыс.

Просмотров 133 тыс.

50% 1

Thanks to Hone for sponsoring this video. Head to honehealth.com... to get your at home assessment and doctor consultation for only $45
Download Cart Plans Here - bit.ly/3GSyv5O
I decided I finally needed to address the elephant-sized pile of scrap wood in my shop. I've needed a scrap wood cart for a long time and I took the time to design up a version that is, I think, a great compromise between size and capacity.
This project was pretty straightforward and would just for a great shop project that will both enhance some skills and add some much needed organization to your shop. In total this project requires 2-1/2 sheets of 3/4" plywood, a couple of 2x4's, and 6 casters.
Custom laser cut acrylic, metal, wood, & more:
SendCutSend - shop.sendcutse...
Check out some more shop-focused plans here:
Shop Nation Store - shopnationstor...
Interested in learning Fusion 360? - bit.ly/3yRVF6x
Links (affiliate links help sponsor the content!):
-------------------------------------------------------------------------------------------------------------------------------------
Kreg Pocket-Hole Jig 720 Pro - amzn.to/2WVUwhv
Kreg Pocket-Hole Jig R3 (mini) - amzn.to/3E6eXcj
Kreg ACS2000 Saw - amzn.to/2RsW3J2
Kreg 62" Track - amzn.to/3fWd73i
Kreg ACS2000 + Track Combo - amzn.to/3po2JEN
Kreg ACS (Top Only) - amzn.to/3fUw8Dy
Kreg ACS (w/ legs) - amzn.to/3wX5C1W
Countersink Bit Set - amzn.to/2YvhjRn
Wixey Digital Angle Gauge - amzn.to/3zSTxgd
Shop Nation Links:
----------------------------------------------------
Shop Nation Website: www.shopnation...
Instagram (@dreamshopnation): / dreamshopnation
Timberland Pro: bit.ly/ShopNat...
Patreon: / shopnation
This video is sponsored by Hone.

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 206

@philippeterson9512 2 года назад

I’ve had a cart like this for about 20 years. My suggestion if you are building this is to use larger casters. Yes, they might have the proper weight rating, but you need a larger diameter wheel so it doesn’t get hung up on debris on the floor.

@Joseph_Streubel 3 года назад

I love how your lumber mess is still so neatly organized. Love the design and great video

@inspiringbuilds 3 года назад

Great design and build! I’m OCD too and mark off the measurements for drill holes. That’s how we produce high quality builds! 👊🏼. Keep up the great work and it looks like it’s family tested strength approved haha.

@jordanfritz4166 Год назад

Precise screw hole placement just makes me happy. Its ok to take extra time if it makes you happy.

@retiredatforty 2 года назад

This is my first time watching this channel. I’m impressed. Subscribed!

@Hizzlesticks 3 года назад

“Why is the earth flat” hahaha that was gold!! 😂🤣😂

@inkuli5 Год назад

Thank you, this is exactly the plan I have been looking for. I have purchased the plans. Love your attention to detail!

@suearmstrong3404 3 года назад

Hey Travis, years ago I built a lumber cart using a full sheet of plywood meaning the cart is 8ft long. I also used a full sheet of plywood for both sides, the small stock bin side and the sheet good side. Let me just say that cart is HEAVY and HUGE! I totally agree, overkill and now it is loaded up and practically un-moveable! Definitely worth tearing down and redoing to something more along the lines of your cart!!! Great job and yes, for the most part, I measure for the screw placement, it just looks so much nicer and professional! 😁

@markmcelroy8489 3 года назад

Excellent video and idea for those of us that have limited space and need to roll things around from time to time. Keep the great videos coming!

@michaelkaye4998 3 года назад

I’m disappointed ☹️. You didn’t paint it to match your other cabinets! In all seriousness great cart. I have to do something like this. Great video as usual 👍

@Tumm3n 3 года назад

Thought the same

@upperhandcustoms11 3 года назад

Agreed. Where’s the paint?

@natep24 3 года назад

That’s funny I thought the same thing

@rudyschwab7709 3 года назад

I can't tell where the wood scraps end and the cart begins, PAINT IT!

@mrohach 3 года назад

I built one that looks exactly the same. I got the design from 3x3 Custom - Tamar. Works great.

@RageDaug 2 года назад

Was surprised he didn't credit that channel. I built mine a while back based on her video.

@dougjones3490 2 года назад

And both are extremely similar to wwmm design from 10+ years ago

@chrisbmurphy Год назад

Bought the plans a couple weeks ago and finished the build last night. Plans were easy to follow, I cut the dados on my table saw for the back panel. Plans were easy to follow, and the design worked out well. The cart holds a lot of lumber and cutoffs which is nice. Now I have one place where I can see what material I have on hand rather than having to look through the various piles that accumulated on the surfaces of my shop. My only change was not doing the dado on the very top edge of the back panel. I just screwed it in and called it good. In fact, one could probably skip the dados altogether and just hold up the horizontals with pocket holes from underneath. Those shelves won't hold a tremendous amount of weight. Those would probably be my only changes if I were to build again.

@jdsworkshop 3 года назад

Dude! How did you know this was my next project for my workshop!? I was spending all week watching similar vids on this subject trying to figure out my design. This is not only great design that fits my space, but also impeccable timing!! You are awesome! Thanks for the video!

@ShopNation 3 года назад

Sweet! Glad it helped

@Zamboni-0805 3 года назад

Good job bud,....This is what I need in my small 2 car garage shop. Thanks for sharing.

@Nwerff 6 месяцев назад

Awsome Travis, watched most of your videos and love the approach. Attention to detail and quality of the builds. Looking forward for the next video. Check in daily

@williammoore4101 3 года назад

Nice build! And I definitely measure and mark out where all my screws are going. We're not crazy, everyone else is.

@cameronpalfy9145 3 года назад

Really efficient little piece Travis. That is exactly what I’m looking for

@johnwilmot6105 3 года назад

Hey there big"T" I like the cart you have built. And you doing a little surfing in the shop gave me a ideal. You come up with a great Monster Truck for your son to ride in!

@g.efaber482 3 года назад

Love this! Thank you, Travis!

@TheGharper976 2 года назад

I recently found your channel and have been binge watching your videos. One thing I have noticed is that you frequently have to fix connections you have applied glue to. I think you could really benefit from dry fitting your projects. Completely assemble using only the mechanical fasteners to verify fit and finish then disassemble and put back together with glue.

@docghines 3 года назад

I plan to remake mine sometime soon. Good design.

@marksexton9827 Год назад

Enjoy watching all your videos, just finished this plywood storage cart, turned out pretty good. I’ve been out of woodworking for many years you’ve inspired me to get back into it. Thank you for your energy in woodworking. Keep the videos coming.

@danjacobsen7645 Год назад

I like your design and I’ll be building this within the next few days. Thank you for sharing

@brentprosser7293 3 года назад

"Why is the earth flat?" Instant subscribe for that level of humor.

@brianembree5572 3 года назад

The Earth is flat?! Why has nobody told me this before? All my years of science class wasted!

@Taranthis 3 года назад

100%

@Lutzboater 3 года назад

Really nice storage cart. Particularly like the evenness of the screws you installed. Do the same thing.

@bloop6812 Год назад

I have several sheet's of plywood plus 2X4's snd 4X4's and it's a teal pain moving them awsy from my tool storage boxes just to get a wrench or other tool out. Thanks gor the video. I don't have all those other tools you have, just basic stuff, circular saw, table saw, etc.

@johnmunoz8845 Год назад

Love this! I can relate.... Thanks for the plans available. I really like the last garage hinge set up you had.

@shawnataylor7998 Год назад

Thanks for sharing this....I definitely need one of these.

@tobythornton603 3 года назад

Love the channel. Not wood working related, but I recently discovered digital/app-based sprinkler controllers and replaced our old RainBird controller with a B-hive from Amazon. Super easy install and much easier to program and it can do things like cancel the scheduled watering if there's rain in the area since it knows the location. You could totally get rid of that big controller and get that space back if you want to. Nice job on the cart.

@ShopNation 3 года назад

Yeah that is for sure on my to-do list!

@jerrydempsey5428 2 года назад

Might be the one that I'm looking for. Iike the idea of stowing it in front of the door. I would never have thought of that.

@samuelgardiner6504 3 года назад

Awesome, love it. Thanks

@raymondtoomey1709 3 года назад

Awesome idea and great design

@MrBrianDuga 4 месяца назад

Rockin background music. Carts pretty good too.

@digitalbaka7722 3 года назад

Totally with you on the measuring screw placement. Love the vertical rails for the sheet side. I made one very similar and struggled to get the shelves square and "level-ish" with a full panel.

@Vincentschneider007 6 месяцев назад

Great work young man

@robthewaywardwoodworker9956 3 года назад

Heading toward that quarter million with a vengeance! Way to go, brother. Keep up the great work. Also, digging that "SEND-CUT-SEND" thing... might have to try them out.

@eddiebrannan5914 Год назад

Nice build, adding this to my to do list! I am with you on the screw spacing! And overkill with the wheels...why not! Keep up the awesome work!

@markkoons7488 3 года назад

Evenly spaced screws are a sign of good workmanship.

@vwagon05 Год назад

Fast Cap makes a tracksaw track holder that mounts to your garage door.

@brianwilliams9154 2 года назад

Thanks for this! I matched the design except made it 3" narrower for my garage. Nice design, sir.

@SssvcreationsAu2015 2 года назад

Thank you for sharing this and many of your shop builds. I am going to start building myself a woodworking station and your video's are giving me plenty of ideas.

@chipsterb4946 Год назад

If you are OCD about screw placement, pre-drilling holes from inside the dados (opposite side) ensures that they are centered on your panel.

@mrgunn2726 2 года назад

Loving this build, need to do something like this for my shop.

@JBLewis 3 года назад

excellent build!

@flyty2134 Год назад

Very nice build it looks great thanks for sharing God bless you and yours.

@rpeebles 3 года назад

I built one similar but in 8ft long and once it was full of lumber 2 of the 6 casters failed and it would not roll. I unloaded it and replaced the garbage casters with 11 better ones and now it rolls fully loaded. If you are only using 6 casters just make sure they are heavy duty and can handle the weight.

@Neuroman22 3 года назад

You are killing it man! Keep up the great work. And now... I will go tackle my wood storage issue as well :|

@murphymmc 3 года назад

Great cart. You did some nice design work on it. It will hold a boatload of assorted stuff, you may be swapping out those casters for larger diameter ones. As heavy as it is, a tiny little piece of scrap will stop you cold, but as you never have scraps on the floor, that point is moot. ;-). When I hand cut dovetails those little pieces seem to always land in front of a wheel, even if it's across the entire shop.

@jameshaulenbeek5006 2 года назад

Very well done sir

@timdoyon1964 Год назад

When it comes to laying out my screw hole locations, you’re not the only one; I do the exact same thing! But the way I figure it, if I don’t aim for perfection, I’ll never achieve it, (not that my work will ever be perfect), but you know…🤔 why not try?

@EngineerMikeF 3 года назад

FYI you can move that sprinkler controller

@hladik2142 3 года назад

This is a Wall, that MOVES LOL !!!

@barryroberts6470 3 года назад

Great build Travis i need to do a very smaller version of that one myself, or the one that Brad did at 'Fix This Build That' which looks similar. Mind you i do prefer your build. Stay Safe, Barry (ENG)

@gungasam3000 3 года назад

Which was inspired by Woodworking for Mere Mortals. Must be a good design to keep being used and re-created.

@Ixglakian 3 года назад

If you don't have enough scrap wood to build a scrap wood storage cart, you don't have enough scrap wood!

@vincentrobinson2994 2 года назад

4:!3 with the OCD screw hole locations bro! I couldn't relate to something so much in my life when it comes to my workshop xD Today is the first time watching your channel and from that point alone your channel has my attention! Plus you have some really awesome and practical Ideas I'd not even thought of. Would love to collaborate on some of mine with you one day mate, I got 12 years of qualified Cabinet Making & Joinery experience & definitely learnt how to make workspace practical in that time 😅

@DrewToner 3 года назад

I've even measured for my brads on a face frame! I'm thinking that you should raise that outfeed table up 3/4 inch, don't have to push down at the end of the sheet, so will be a lot easier to push through!

@KDiddyCPA 2 года назад

Your videos are very impressive. You possess a unique ability to build most anything. On a different note, I don’t care for your music choices at all.

@chrismoore9997 3 года назад

You have got to get a guard for that dado set.

@bellowsforge9726 3 года назад

Very nice, and only $8 for the plans! Definitely going build me one for my shop

@chrisnocker3437 3 года назад

Wait…. What? There are people who “DON’T” measure and precisely layout their screw holes? I would t be friends with those people 😂

@Leftyguitarnut 4 месяца назад

Hello from Australia. Nice work on the cart - the plans don't seem to be available anymore ...??

@lapalomas Год назад

No Shop Nation "grey"tness paint on the new cart?

@jimfeaster4837 3 года назад

Nice job..

@FearsomeWarrior 3 года назад

Routers make a fantastic mess. Been putting off some routing myself but I’ve also been vacuuming all the time anyway. Great build as always. Wood problem? It’s not serious is it? Oh my God! So much wood in my garage.... it’s bad. Real bad.

@dblarue8611 Год назад

I purchased the plans several months ago and just now ha time to start the build. I read through the plans and have found the Cut Sheets 1-3 confusing. I suggest that you remove repetitive cuts, i.e. Base Panel, Back Panel, Front Skirt, Back Skirt etc. etc. from Cut Sheet 1,2&3 Once a cut is made it doesn’t need to appear on additional Cut Sheets. The Wood Storage Cart plans are excellent with the exception of my previous statements. My 2 cents

@CdeL-qs7cy 3 года назад

Your wood corner looks like my corner! 😁

@folendorf1 3 года назад

Finally caught up with all your videos! Looking forward to many more! Great work as always:)

@Golfexpertbelieveme 3 года назад

I love the video. But I built one of these for my third stall garage shop and I absolutely hated having it during the winter time. I didn't mind it during the warm months as I would just park my truck outside a lot of the time. During the winter though when I want both vehicles in the garage cause of snow or it just being crazy cold it made the third stall shrink by having it. I was always moving it around so I had more space. Again though I liked your video and love the channel. Just my experience with a lumber cart wasnt good. I started really planning out anything I wanted to build a lot more so I dont have much off cuts and for the off cuts I do get I just try and make small little things out of it to sell or give away right away.

@JasonWilliamsPlus 3 года назад

Awesome design. As soon as I finish building the shop cabinets (going in a laundry room though), I will be buying these plans. As always, love your content. Keep up the Shop Greatness!

@thumbwiz 3 года назад

Steve Ramsey built the same storage cart 8 years ago, and his plans are free. If you're interested - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nZtIEFa3Ofk.html

@hubertsirois5678 3 года назад

vraiment une belle job. nice job.

@JWimpy 3 года назад

Yep, the screws have to be spaced evenly. My OCD goes haywire if they are not.

@Vitulli1970 2 года назад

Yeah Im OCD like that too... But... Im an engineer too... so its in the blood...

@dulshafer 3 года назад

Hey Travis, love the build. I think you’re my sprit animal. Surfing around the shop, goofing around, making fun of yourself in the video, overkill sticker placement? All good to me! Thanks for the idea, I just might be making a shop cart myself soon. …just need to add it to the list of other shop projects I have. Only about 38 of those…

@craigmonteforte1478 2 года назад

yes i’m all about measuring precise locations of screw holes it may be OCD but IMO it’s more of what separates the Professional and the NonProfessinals it’s Integrity and i don’t even care if it’s in a spot nobody will even see

@johnoquinn6740 2 года назад

Great build and video! 👍 I can see one of these in my near future. Keep measuring for screw placement. I do too, and it drives my buddies crazy. 🤗😂😂

@bretthollenbeck812 2 года назад

Great video again! I like your design much better than the one I’ve been using. Looks like its time to build a new one. I’m with you on the screw placement too…just makes it look better.

@keithkozma 3 года назад

Awesome, my wood storage solution is outright embarrassing! I have that same "curb" all the way around the garage and mine would have to go on a wall, so I'd have to compensate for that to make sure my wife can still get her car in there. I usually start out measuring screw holes, but as the projects drag on my give a damn gets less and less. lol

@timothywhite6532 3 года назад

Nicely done

@JeppeChristiansen22 Год назад

this is the first video I have seen from this channel, it was a pretty good video on making a woodkart but the music in this video was so bad it was loud and noisy and annoying

@philshock3805 3 года назад

I've got an 8ft long wood storage cart on casters for sheet goods and cutoffs. I still have a wood storage problem ... mainly because I lack the "get rid of it" gene.

@houstonsam6163 3 года назад

Really enjoying your channel and overall approach to "making" and talking about your RU-vid side gig. I infer that you are a displaced Tennessee boy like myself. I tackled a very similar problem when I gave away a massive, far too large, way overbuilt storage cart I had built and worked around for years. But I refused to buy materials for the smaller cart - I insisted on building it purely from the scrap I had on hand, which was barely adequate. So I made a lot of compromises and accepted a "minimum viable product" outcome. It would never be acceptable for a RU-vid "maker" but for a wanna-be, it works. Maybe I'll accumulate enough scrap now to upgrade to something more like yours.

@ChrisHornberger Год назад

That is SOOOOO not embarrassing. You should see mine. LOL

@dirtybaywoodshop-joeporter5650 3 года назад

Nice cart, Travis! It coincidentally looks almost exactly like the one I built a couple of years ago. I skimped and used 1/2" ply which I instantly regretted. I also just used pocket holes to attach the shelves instead of dadoes. For the plywood side, I wound up adding two removable pieces of conduit that stick up in front of the cart so that I could sort through my sheets and get to the ones in the back without having to offload everything. Overall it has been holding up really well. Nice design, Travis!

@ShopNation 3 года назад

I like the conduit idea, that is awesome

@dirtybaywoodshop-joeporter5650 3 года назад

@@ShopNation yeah, it was a super simple and cheap solution and works well. Just made a couple blocks for them to rest on that I attached to the cart, then used a conduit bracket to keep the pipe on.

@mgwood558 3 года назад

Your cart looks exactly like one I made over 10 years ago for plywood and other storage. I got my plans from Wood magazine. Your cart looks strangely identical.

@ashokmoghe8035 Год назад

Hi - yes I have an OCD too and like to place screws in precise locations. Great build and I am inspired to build one like yours. Given that you have been using it over a year by now, appreciate if you can comment on changes or improvements, if any. TIA.

@seanbrotherton542 3 года назад

Need dust collection? Your legs are great dust collectors! not seeing the problem. Is that plywood from Lowe's? I found some pretty decent sheets that are primed on one side with lots of layers. Its the poor mans baltic birch. The top veneer splinters easily unless painted but its still pretty good for the price. I was just wondering what you were using. I really like the plan for a smaller version. Well thought out. I'm still holding out for the shop margarita machine build! I know it's coming one day! As always, love the channel. huge fan. keep spreading Shop Greatness!

@ShopNation 3 года назад

Yes the blondewood from lowes is my favorite big box store ply.

@vladtepes97 2 года назад

8:34 i prefer to do my prep work after i'm finished building the thing.

@robertlivingstone3947 3 года назад

Great video

@davidyeo4302 3 года назад

Awesome! But I am a little disappointed it wasn't painted Shop Greatness Gray.... hahaha

@e7engle 3 года назад

Wait you didn’t paint it? Are feeling ok?

@ShopNation 3 года назад

Haha I know, right!?

@shockjock35 3 года назад

Yep, You gotta Paint it!! lol 😂 look Awesome man!!

@themeandrousengineer 2 года назад

I can't help measuring the screw locations either....

@mikek2216 4 месяца назад

What kind of wood do you typically use for your builds?

@thumbwiz 3 года назад

I built the same storage cart using free plans from Steve Ramsey.

@dennissteffa670 Год назад

I just watched that video from Steve Ramsey looks a lot like it.

@toonybrain Год назад

Steve Ramsey took down the link target. I was just there and I couldn’t get the plans. 😭

@matte9274 3 года назад

Can we get a link to Lowes for the plywood you use or just a description beyond good quality? There is such a big selection and taking the guesswork out of it can help

@patriotwoodworker6092 3 года назад

You need to paint to match your shop! Cool cart though

@mandimusic5109 Год назад

Once upon a time (I'd say 60s and earlier, in the US anyway) it was uncommon to bathe daily. Washing/drying/styling hair - especially long hair - was more of an ordeal. Since hair was dirtier when washed, a double shampoo was often called for. But also yes, they sold more shampoo by insinuating you had filthy hair and should use double the product. Pro tip for everyone: buy a $3 plastic scalp brush for use while shampooing.