Create corrugated sheets easily in Revit! 

we are pleased that you appreciate the content presented!

@@RVTStudio I've watched a couple of other tutorials, and even if I don't even speak Arabic, they're very useful. Thanks for your work. Where are you guys from ?

Thanks a lot! We are from Egypt.. We will try to include English subtitles in the upcoming videos

@@RVTStudio shukran ! Greetings from France.

شكرا يا أحمد

I am using Revit 2018, I could not start. I need it you send me in 2018 please? My mail edelen@onurgroup.com

Thanks man! Glad you found it useful!

Hey! I can't promise to make that video soon, but it should be no problem to make such a frame using either beams (or beam systems) and steel columns, or even curtain walls and sloped glazing (the curtain wall type in roofs), with mullion types changed to an I-beam or a Channel profile. Both tools should work!

Hello Adil I advise you to divide your grid using minimum spacing instead of fixed distance to avoid having a fraction of a panel Using fixed distance means that wall length should preferably be a multiple of the panel size

@@RVTStudio Thank you so much for the advise. I recently encountered one more problem with the corrugated sheet wall. When I try to attach it to the roof. The wall attaches itself to the roof of the straight side but not on the gable end. When I attach the wall to the gable end it changes the curtain panel and makes it to the default panel of glass. So I have 2 walls of glass and 2 of corrugated sheet.

@@adilaliplasterwala8261 Thanks Adil for this important remark! Yes unfortunately, as far as we know, Revit can't create fractions or cut parts of curtain panels. It can only create fractions of system panels, that's why it replaces all curtain panels by system panels! Unfortunately we can't edit a system panel family and make a new type with a corrugated sheet extruded profile. The solution is: creating a pattern based model or an adaptive model, make a mass of the wall profile, divide it, and apply the pattern based model or the adaptive model to the mass divided surface, and make sure the border type is "Partial". This technique is also often used for shingle roof tiles. One work-around I suggest is to use this curtain panel type, and increase the division intervals of curtain grids in the other direction.. make the distance between grids 5cm for example. This will create a saw-tooth edge of the curtain panel.. only 5 cm of the corrugated panel will be replaced by the system glazed panel. This is not 100% precise but it is a work around to save some time. We are sorry for this inconvenience, but many thanks for pointing this out! We will try to address these issues in upcoming tutorials

Yes we are working on adding English subtitles to the upcoming tutorials! Cheers

Selam Kadir bey. Revir 2018 kullanıyorum acamadım. Sen 2018 olarak bana yollayabilir misin? edelen@onurgroup.com

@@plancost4156 hocam revitte, autocaddeki gibi bir alt surumde kaydetme yok diye biliyorum. Yani acmaniz icin 2019 lazım galiba. Ben de dosyayi indirmeyip.kendim yapmistim benimki de 2018

Hi Tin! Have you tried using the TAB key on the keyboard while trying to pick the edge?

Unfortunately, Revit can't create fractions of a curtain panel family, so it replaces it by a system panel family. As far as I know it is not possible to create a system panel family with corrugated sheet profile or any profile to use it instead.. Creating corrugated sheets with irregular borders requires using adaptive components or pattern based curtain panels to create partial panels! We will try to address such issues in other tutorials

Thank you. And looking your new video.

شكلها عامل ازاي اعتقد ممكن ترسمها كحائط عادي

@@RVTStudio ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5EmgD30QOeE.html

ياريت يا هندسة في رقم للتواصل واتس اب اقدر اتواصل معاك

٠١٢٧٧٥٥٥٢٦٤

Here you are drive.google.com/open?id=1Ih1OyzioG5rFEdl8r8b4QlDOlPEozktr

Just consider it a normal curtain wall which you want to add some openings to Add curtain horizontal grids to define the openining bounds (sill and height) Unpin and remove the gridline segments inside the opening Replace the panel inside the opening bounds by a curtain wall door or window family

نزل الفاميلي اللي محطوطة في لينك الDescription بتاع الفيديو اعمل drag and drop في الفايل لازم هتلاقيها موجودة في الحوائط و الأسقف الاتنين

Feel free to contact us on our Facebook page: facebook.com/Studio.RVT/

يفضل استخدام Minimum Spacing بدلا من Fixed Distance عند اختيار ال Grid Layout بالنسبة للسؤال التاني: طريقة عمل الفتحات في هذا الحائط هي نفس طريقة عمل الفتحات في أي Curtain Wall بمعني يمكن إضافة Grid على منسوب عتب الباب بارتفاع 220 سم ثم يمكن تغيير البانلز المطلوب عمل فتحة بها لنوع فاميلي اخر و هو Curtain Wall Door و لا تنس عمل unpin للبانل حتى يمكن تغييرها مع مسح أي Grid Segment إضافية ممكن نعمل توتوريال على عمل الفتحات في ال Curtain wall

جرب كده و قولنا :)