CReeves Makes The French Cleat Tool Wall Organizer ep020

Подписаться 68 тыс.

Просмотров 816 тыс.

50% 1

Plans:
Sanding Rack: creevesmakes.c...
Drill Rack: creevesmakes.c...
Mobile Miter Station: creevesmakes.c...
I have been thinking about how to keep my shop neat and organized and I had a friend on social media share with me some pictures of how he organized his tools. So the french cleat adjustable wall organizer was born into my brain and into my shop.Also, there are several videos right here on RU-vid where you can see all sorts of cool ideas with french cleats. Check out Johnny over at Crafted Workshop here: • French Cleat Tool Stor...
I would like to thank PureBond plywood for sponsoring this project and video. Please be sure to check them out here: purebondplywood... . PureBond is exclusively sold at Home Depot and made in the United States!
The tool holders that I built for this project are awesome and if you have any questions about them, please leave a comment below or send me a message and I would be happy to answer. I didnt go into much detail about them as everyone has different tastes on how to organize their tools. This is what worked for me and how my work flows through my shop.
Email me at: CReevesMakes@gmail.com for specific questions!
Tools I use: Affiliate links!
======================================================
Bessey ¾” Pipe Clamps: amzn.to/2qcnR2D
Bessey General Purpose Kit: amzn.to/2uUlreJ
Diablo 10” 60t Blade: amzn.to/2qabLrD
Diablo 10” 24t Blade: amzn.to/2GGT0Cc
DeWalt Countersink Bits: amzn.to/2qb2sHT
DeWalt Goggles: amzn.to/2EpZQKk
FastCap Glu-Bot: amzn.to/2q9TMBv
FastCap BabyBot: amzn.to/2JpYvr0
Irwin 24” Quick Grip: amzn.to/2uPLXpB
Milescraft Push Stick: amzn.to/2JnT77w
Milescraft CircleGuideKit: amzn.to/2uQgOCf
Milescraft DT Featherboard: amzn.to/2HcDA9X
Milescraft Grabber: amzn.to/2Ix0ZT4
Milescraft Tri-Grips: amzn.to/2q9iORr
Milescraft Hook Driver: amzn.to/2uUkK57
Milescraft Drill Block: amzn.to/2q8S9nI
Milwaukee Bit Set: amzn.to/2EpORkg
Microjig GRR-Ripper: amzn.to/2uPAm9P
Microjig Leg Set: amzn.to/2H3FCvA
Rockler Glue Brush: amzn.to/2q9WgA2
RZ Mask: amzn.to/2EpZwv6
RZ Filters: amzn.to/2qaWwPc
Resources: ======================================================
Crafted French Cleat Wall: • French Cleat Tool Stor...
Social Life: ======================================================
Be sure to Like, Subscribe, and Follow me on the following social media platforms as well!
Facebook - creevesmakes
Instagram - creevesmakes
Twitter - creevesmakes
Music: ======================================================
"GO", "Dirt", and "Shake It" by Jahzzar
Licensed under Attribution-ShareAlike 3.0 International License. freemusicarchiv...

Опубликовано:

20 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 472

@barryroberts6470 6 лет назад

Excellent build mate, i like the French Cleats myself and have been meaning to do one myself, but like you life gets in the way, pity you couldn't do any PDF plans on those holders?. Excellent again and well done. Barry (ENG)

@CReevesMakes 6 лет назад

Thanks Barry! I could do plans for the holders if you wanted anything specific. But everyone had different i ponies on how to hold tools and such. Let me know! Thanks!

@krunoslavsilic1059 4 года назад

@@CReevesMakes j k977ubvi bc8

@kaysengriffin6522 3 года назад

@Alan Rudy yup, I've been watching on InstaFlixxer for since december myself :)

@enriquemoreno9397 4 года назад

You ready did a good job it looks great and everything well spaced. Thk you for sharing you ideas Really helpful to all OF US DIY GUYS.

@CReevesMakes 4 года назад

Thank YOU for watching and for the comment!! 👍🏻👍🏻

@JesusUruchurtu1 3 года назад

I don't think a lot of people realize how amazing this is. There's like a million french cleat tutorial out there. But out of this build I get extraordinary tips that I have never seen before. First of all the drill station is really well thought, secondly, the scrap piece on the TS fence to serve as a feather board and keep the piece flat on the table is brilliant, and then adding glue to the screws to increase their strength and also serve as lube when going in is also really good!. Thanks for sharing! I saved the video, shared it with two friends, liked it and of course subscribed! great content!

@CReevesMakes 3 года назад

Thank you very very much Jesus! I just want to share as much as I can with everyone in hopes to inspire them to build and make their own racks, jigs, storage etc. thanks for sharing!

@sambennett5441 4 года назад

Looks better than the Home Depot showroom. Thanks for making it quick and not droning on forever on how to make a tool hold. Headed to the garage to build my own.

@CReevesMakes 4 года назад

AWESOME! You will love it!

@donpettinger8079 6 лет назад

What an awesome build. I love it. Plan to copy it for my shop. You also do a great job. Thanks.

@CReevesMakes 6 лет назад

Thank you thank you! 👍🏻👍🏻

@terrygabrielson5598 4 года назад

Thanks for the shot back, I didn't use it, I got 3/4 ply, can't wait to start making the holders, yours looks outstanding

@raymondrumbundaberg 3 года назад

It looks like a shop display on your wall. Great job

@CReevesMakes 3 года назад

Feels so good to get organized! Thanks!

@MrProfessionalk 5 лет назад

Great, layout. Rounded edges excellent quality feature. I'll use that method going forward.

@CReevesMakes 5 лет назад

Thanks Kelvin! Yeah the rounded edges hold up better and keep the hands safe when grabbin tools! Good luck! 👍🏻

@danielberru2022 5 лет назад

This was a cool design and the shop layout looked very functional

@CReevesMakes 5 лет назад

Thank you and yes I have a fully mobile shop so I can achieve different layouts for different projects. Thanks for watching!

@deanslegos1990 5 лет назад

Man it looks like a display for a store or commercial 👍

@CReevesMakes 5 лет назад

Thanks!

@robbiejeffrey4618 5 лет назад

That's a nice set up and wall organized idea.

@CReevesMakes 5 лет назад

Thank you very much Robbie! Building another one as this one is very useful!

@johnklein4558 6 лет назад

Casey thanks for the video. I REALLY like this idea for my shop. I have a bin for sandpaper and even though it’s clear it’s still a hassle finding the grit/shape sandpaper I want. Your idea will simplify that process considerably.

@CReevesMakes 6 лет назад

Awesome John! Glad to help. Good luck! 👍🏻

@randywise7936 6 лет назад

Next project. I'm glad to see you use Rigid Tools. Might need to put the plans out there for the holders I will need them to build holders for my Rigid tools. Thanks again for a great video.

@CReevesMakes 6 лет назад

Thanks Randy! Ridgid rocks for what I do. Message me and let me know what holders you are interested in.

@randywise7936 6 лет назад

Sorry to say but all of them. I have the same kits you have. Why do you not sell these drawings? Just a thought. Thanks for any help and plans you pass on.

@CReevesMakes 6 лет назад

Hey Randy. Shoot me an email at CReevesMakes@gmail.com and I will see what I can do. I do not currently have a platform to sell plans on. I want to, but just havent made the time yet.

@cdomaika 6 лет назад

WOW! What a difference. Excellent job. I love how you build the right way with well thought out plans, and added asthetics!

@CReevesMakes 6 лет назад

Yeah it has been a huge improvement to my shop and work flow! Thank you very much! 👍🏻👍🏻

@RevivedBuilds 6 лет назад

Nice Build Casey! The french cleat system looks great. I definitely need to put one in my shop.

@CReevesMakes 6 лет назад

Thank you very much! It is VERY handy!

@felixfromnebraska8648 4 года назад

Great content my friend. Love your Ridgid Tools, I have been collecting them as well, what a great value and warranty. My shop always seems to be a work in progress. Thanks for sharing, Felix

@CReevesMakes 4 года назад

Congrats on a solid tool choice and thank you watching! I hope I inspired you to store your tools in a cool way!

@russelldevane5434 4 года назад

Looks great and organized. Great build.

@CReevesMakes 4 года назад

Thank you!

@gidesp1 5 лет назад

Superbe. Excellente idée. Merci

@hammetolivier9686 5 лет назад

Looks neat, kind of like a display in a store. I like it!

@arcyoon 6 лет назад

It's as neat as a tool shop.! Nice!

@CReevesMakes 6 лет назад

Why thank you!👍🏻

@arcyoon 6 лет назад

CReeves Makes It's like a good store that's in good order and comes in at a glance.!

@stevenclyde1978 6 лет назад

Looks fantastic Casey! Really turned out nice!

@CReevesMakes 6 лет назад

Thank you Steven! I'm glad that I did it and look forward to working with it over time. I have already rearranged it several times, but the versatility is unrivaled by anything I have used in the past.

@DK-yy5yy 6 лет назад

Looks phenomenal, great build

@CReevesMakes 6 лет назад

Thank you very much Daniel!

@tommyhuff981 3 года назад

Great job! Love your attention to detail

@CReevesMakes 3 года назад

Thank you very much!

@rafamanzanares1046 5 лет назад

Me encanto tus ideas.. mis repetos.. voy a intentar hacer uno.. saludos

@dennismedeiros5125 6 лет назад

looks like a tool store display. great job

@CReevesMakes 6 лет назад

Yeah I get that a lot but it sure is handy! Thanks Dennis!

@keithrayeski6417 4 года назад

Hey, new subscriber! Love your use of clamps as a second set of hands! The really WOW one was starting your plywood cut and then putting a clamp on the cut to keep it from dropping away and tearing! Genius! I've seen several different ones but your design is really user friendly! I'll be checking out your other videos because I enjoyed your presentation method and detailed help in the description area. Beautiful build!

@CReevesMakes 4 года назад

Thank you very very much Keith! Glad that you enjoyed it! More to come! Lots going on in the shop! Thanks

@garymac121 6 лет назад

I really like your wall and tool holders. I just completed my French cleat wall and was thinking of how to populate it. I'm going to borrow several of your ideas. Thanks again

@CReevesMakes 6 лет назад

Awesome! Glad you enjoyed it Gary. Good luck and have fun building!

@JaymeVanAuken 3 года назад

Excellent video. Great system

@CReevesMakes 3 года назад

Thank you very much!

@douglashaner6802 5 лет назад

This will be the way I go. Wanted French Cleat but was a bit apprehensive of the thought of leveling and drilling each slat into the wall. Using a sheet of plywood as the base is wonderful.

@CReevesMakes 5 лет назад

Awesome! Thank you Douglas. I have moved them a few times and a sheet is way better than individual slats. 👍🏻👍🏻

@CReevesMakes 5 лет назад

Awesome! Thank you Douglas. I have moved them a few times and a sheet is way better than individual slats. 👍🏻👍🏻

@conoromeara8974 4 года назад

Good video, hate when others explain every little thing in real time..! It turned out nice and clean.. I’m a wood shop teacher from Ireland. My school has just completed a new wood working room, I’m definitely going to do something like this 👍

@clayholbrook6705 6 лет назад

Looks great! I'm really impressed with your choice of tools, I love RIDGID!

@CReevesMakes 6 лет назад

Thanks Clay! Ridgid had the best platform for what I want to do in my shop. I know a lot of people with a lot of different tools and I have used a lot of different brands as well. With the LSA and the support they offer, they are great. Thanks!

@migdi242424 6 лет назад

To think these big name brand hardware stores have been selling hooks and crap for years when French cleats are the way to go.. Great job.

@CReevesMakes 6 лет назад

Yeah for sure! I used pegboard for a long time and it was a pain. I love the ability to slide these things around and add as I grow!

@southpaw6167 2 года назад

Nice job ! Very professional.

@CReevesMakes 2 года назад

Thank you very much!

@bryanbatts 3 года назад

Sweet build!!! Looks killer!

@CReevesMakes 3 года назад

Thank you very much!!

@ShopDawgWoodworking54 6 лет назад

Great job, looks much better.

@CReevesMakes 6 лет назад

Thank you very much! I agree, much better! 👍🏻👍🏻

@larryhorn9294 4 года назад

I love how you have a shelf for the batteries and have the charger mounted right on it! I think I'll be trying to replicate this!

@CReevesMakes 4 года назад

Thanks! It wasn’t planned that way until I had it built and it just happened to work. I have the cutlist available on my website!

@free-energy-systems 4 года назад

That's a drastic improvement on your wall. Also, I am big on Made In The USA. That's what made America great after WW II. Mfg. increased and the quality of life for Americans became better.

@CReevesMakes 4 года назад

Thanks 🙏🏻 and agreed! 🇺🇸 👍🏻

@dariopiec9552 2 года назад

Very nice, good job. Greetings from Poland

@CReevesMakes 2 года назад

Thanks! I appreciate that! Greetings to you from Chicago!

@markfernandes2396 4 года назад

nice, professional work. good job, excellent explanation.

@CReevesMakes 4 года назад

Thank you very much!

@deansolano1483 6 лет назад

Very nice , what a great idea. Thank you .

@CReevesMakes 6 лет назад

Thanks Dean!

@robertclark3258 6 лет назад

Very nice idea and very well executed!

@CReevesMakes 6 лет назад

Thank you very much Robert! After using it for some time now....I may build a big brother on the other side of the window!

@dariopiec9552 4 года назад

It looks so nice. Everything in this video look professional and easy to make for every person. Greetings from Poland, Pułtusk :)

@Chriswoodworker 6 лет назад

Nice job. My next work shop mission.

@CReevesMakes 6 лет назад

Thank you very much Chris! Good luck!

@glennboniface 6 лет назад

Awesome setup Casey!!!

@CReevesMakes 6 лет назад

Thank you Glenn. It has been a long time comin, to get the shop in this kind of lay out. Its far from done, but the work flow moves much better than it did before.

@bpdmoses 6 лет назад

Nice work man. Can’t wait to get mine completed

@CReevesMakes 6 лет назад

Awesome to hear! Thanks

@davidhughes6578 6 лет назад

Very nice, inspired me to get started on building one. Keep up good work

@CReevesMakes 6 лет назад

Thanks David! Have fun! 👍🏻

@JK-jl1bf 4 года назад

I love how the soft wood looks.

@CReevesMakes 4 года назад

Thank you very much!

@Kenfitzpat 3 года назад

Nice job thanks for sharing it. I tried for months at 2 different Home Depot’s and couldnt get any of that plywood. I finally called the pro desk and they said they had it right along. I ordered for curbside pickup and got 3 sheets of the Pure Bond Poplar 3/4”.. Got them home and they look great. Have a project in mind of a lathe cart from Fix This Build That here on RU-vid and cant wait to start it. Hope it works as you commented. Once again thanks for posting the video

@CReevesMakes 3 года назад

Glad you were able to get some! It’s a great product and cheaper than hardwood dealer priced plywood. I just paid $160 for a 3/4” sheet of walnut ply. 😳 ALSO check out Jay Bates lathe cart that he built. He does great work.

@CReevesMakes 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NLMOvuNxGb0.html

@Kenfitzpat 3 года назад

@@CReevesMakes I have followed Jay since he lived in an appartment years ago and he is amazing. Ive decided to go with “Fix this Build that’s” lathe cart though its more in line with what I have as a goal. I like his plans and have made a number of them and they come out well. If you haven’t you should check out the Fix this Build that FaceBook page.

@CReevesMakes 3 года назад

Oh I agree. I know Brad from the community and his cart is great as well. Good luck and have fun! 👍🏻👍🏻

@Kenfitzpat 3 года назад

@@CReevesMakes I can still get Walnut ply for 75 a sheet along with some decent refinished maple and some nice looking cherry for 72 a sheet. We have a plywood specialty warehouse about 20 miles from here.

@cs3225 5 лет назад

Well built! I’m not sold on French cleats in general but if that’s what you’re into then all the power to you. Nice job.

@CReevesMakes 5 лет назад

Hey everyone has their own thing right? I used pegboard for too long and was tired of it. So far I am really happy with the FC wall and plan to add some more! Thanks for watching!

@cochinaable 5 лет назад

wOw!!! Nice and neat! Great work.

@CReevesMakes 5 лет назад

Thanks

@lucyswannsunsafespace7313 4 года назад

I’m just getting started woodworking, for like a few months. I’m not very mechanically inclined, impatient, and can’t even read a tape measure to more specificity than 1/4”. I’ve got so much clutter in my wood shop that my clutter has its own clutter. So, building anything was a nightmare and extremely slow going, because I can’t ever find anything! Cleat walls are very attractive space savers and help keep everything visible and at close to eye level. I started working on putting a system together, but the wall has pretty much taken up my time for the last several months. I don’t have a solid wall, only bare studs, because, well plywood is expensive. I tried to come up with something to go all the way across in cutting cleats out of 1/2” ply long enough that they stretch across several studs, but I’m finding how unstable they only reason I haven’t taken it all down and started over, is the lack of space foe everything and all the waste of plywood. However, just like most of my projects, I think I’m going to HAVE to start over completely, because I’m wasting more money trying to keep everything stable, than I would if I just broke down and put sheets up, with cleats already on them, like you’ve done. I really enjoy your step-by-step tutorials and wish I would’ve found your channel months ago. Thanks a for the videos on cleats & holders. I’m just very concerned with using only glue, and part of my issue is trying to nail/screw everything. If I have to re-fashion a holder, I have to pull nails out and fight with it. It’s a pain! Anyway. Thanks again!

@CReevesMakes 4 года назад

Thanks Lucy! So, you are putting 1/2” plywood on the bare studs and it’s still unstable? That should tighten everything up if the studs are secured properly. I use 1/2” plywood for the back and then 3/4” for all the cleats. I have used mostly glue and Brad nails. I have had zero issues with glue failing. Hit me up via email and send me some pictures. Creevesmakes@gmail.com

@lucyswannsunsafespace7313 4 года назад

CReeves Makes 1/2” cleats were put up, but the sheets of plywood were cheapest they had and there was no “backing” besides the wall, but studs are 2” deep, so the wall can’t support the cleats, only the studs. I put up 1/4” plywood, with 1/2” cleats yesterday, and it seems very sturdy, I’ve just got to go back the square one on the few holders I’ve built, I guess, because they’re not fitting the best either. Still no stability. I’m using 1/2” cleats on the holder backs too, so they’re the same size as the wall cleat. We’ll see with new holders if I can stabilize. I’m thinking I may have put too many trim nails or something in them. No clue. But the most logical solution is honestly to just start over, instead of trying to “salvage” lol

@whiteheadcustomcrafts3555 4 года назад

love that system my friend now subscribed

@CReevesMakes 4 года назад

Thank you very much!

@bilbonanno4443 5 лет назад

Really nice system! Thanks!

@CReevesMakes 5 лет назад

Thank you very much! Building another one!

@MostynFaulkner 5 лет назад

Thanks for the great video and explaining as you go.

@CReevesMakes 5 лет назад

You’re welcome and thank you! 👍🏻

@Thegusto 6 лет назад

I like the choice of power tool I hope rigid appreciates it

@CReevesMakes 6 лет назад

Thanks Augusto! I love the warranty platform and customer support that they offer. Second to none as far as I am concerned and I am not gettin paid to say that. I had my choice of "color" of power tools to use in my shop and I researched and asked a lot of questions. I don't knock the other brands (we use DeWalt at my day job ALL DAY LONG) but I just really like the Ridgid product line and where its headed with some of their new tools. Thanks!

@chuckschuld3032 5 лет назад

You work as a god . . . Very nice job 😀

@CReevesMakes 5 лет назад

I dont know about that! LOL But, thank you very much! I am working on building another wall like this with more tools and holders! This one was great but too small!

@simonlaplante7190 5 лет назад

New subscriber. Because you are equipe with Ridgid. All bateries (without cord all around) like I wish to be equipe. Good brand, affordable and durable.

@CReevesMakes 5 лет назад

Thanks! Ridgid makes a great product and they stand behind it and their customers! Thank you for watching!

@משהנחום-ו9ח 4 года назад

ok wow, that's amaizing!

@CReevesMakes 4 года назад

Thank you very much! 🙏🏻

@megselv26 5 лет назад

Great job, looks awesome 😊😊

@CReevesMakes 5 лет назад

Thanks Arne! 👍🏻👍🏻

@Tina-di4lx 3 года назад

Nice I’m building a wall right no. I think I’ll try this out.

@jacobecorder 5 лет назад

Nice job man. Thanks for the video

@CReevesMakes 5 лет назад

You’re very welcome Jacob! Thanks for watching! More to come! 👍🏻👍🏻

@seoulboy 6 лет назад

Its great idea to organize stuff

@CReevesMakes 6 лет назад

Thank you!

@mikekelch7768 5 лет назад

Beautiful! Love it.

@CReevesMakes 5 лет назад

Thank you sir and love your thumbnail logo! 👊🏻👍🏻

@franciclope 6 лет назад

Love ridgid almost 7 years with my cordless drills and they works like new.

@CReevesMakes 6 лет назад

Awesome to hear! Great platform with great customer service and support! 🧡👍🏻

@clebercosta2457 4 года назад

Parabéns estou montando uma aqui na minha garagem . vou me inspirar na sua criatividade👍👍👍👍👍👍👍👍👍

@chrisAclaes 4 года назад

Looks great, man. Definitely dig the custom holders, I’ll have to try that.

@sumosprojects 6 лет назад

It not only looks terrific but you’ve gained so much more practical tool storage mate 👍👍👍

@CReevesMakes 6 лет назад

I love the setup and having everything right within arms reach! Thanks! 👍🏻👍🏻

@nikolaatanasov5629 5 лет назад

Х , m.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-moFOUPnWEvo.html m.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-moFOUPnWEvo.html га

@ВикаКудрявцева-с7ж 2 года назад

Great item!

@CReevesMakes 2 года назад

Thanks!

@mickydl66 6 лет назад

Amazing job, great... Micky from Italy

@CReevesMakes 6 лет назад

Wow! Thank you very much Michele! 🙏🏻

@ЧезаЧеза-ч4т 6 лет назад

Молодец хорошие порядок привёл инструменть хорошье увас успехов вам

@CReevesMakes 6 лет назад

Thank you! I used Google translate to read your message!

@ЧезаЧеза-ч4т 6 лет назад

CReeves Makes извеняюс я не понял што вь написали

@BigmoRivera 5 лет назад

Nicely Done 👍

@CReevesMakes 5 лет назад

Thank you very much!

@gandjboyd7872 6 лет назад

Great build , Ridgid are awesome

@CReevesMakes 6 лет назад

Yes they are! Thanks!

@camilosandoval2110 5 лет назад

Nice!! Thanks for share!

@CReevesMakes 5 лет назад

Thanks!👍🏻

@n3lud 6 лет назад

Great job. Enjoyed the video.

@CReevesMakes 6 лет назад

Thanks! 👍🏻

@freedomlawnservice1987 4 года назад

Looks like a rigid commercial lol awesome buddy!!

@CReevesMakes 4 года назад

Yeah it does doesn’t it? The Home Depot Ridgid section is smaller than this! 😂 Thanks for watching !!

@nomadthreeonebravo8940 5 лет назад

This video brought to you by Ridgid. Just messing with you. Great vid man! Love the drill storage idea.

@CReevesMakes 5 лет назад

😂 Thanks Nomad! 👍🏻👍🏻

@xenu8008 4 года назад

So all the junk you had piled up got tossed, to be replaced by a wall of Rigid tools.

@CReevesMakes 4 года назад

I sorted it all out and put it into carry totes and yes then I put up the tools on the cleat wall

@goodingwashington6099 5 лет назад

Comparing pegboards to french cleats is not fair. Having said that, I am going for French cleats. Cool video. Thanks a bunch

@CReevesMakes 5 лет назад

Thank you! I am loving the french cleats so far! Good luck!👍🏻

@denirc 6 лет назад

Great design for drills. Love it. :-)

@CReevesMakes 6 лет назад

Thank you! 👍🏻

@assie8 6 лет назад

Love your work , very inspiring !

@CReevesMakes 6 лет назад

Thank you very much Asher!

@user-kf8qc7cx4n 4 года назад

Nice wall 😀👍

@CReevesMakes 4 года назад

Thanks 😁

@jacksmiles47 5 лет назад

Really dig the setup brotha. I like that you customized the board for your needs, yet kept it simple enough to be conceptualized for shops with other tool brands, or a hodge podge of different brands and it still look clean and organized. Thanks for the share from The Honey-Do Crew in California my man. Keep it up :)

@CReevesMakes 5 лет назад

Thank you so much for the compliment! I just know what I want for my shop and try to build it. I am actually going to build another one of these for more tools! Take care and thank you for tuning in!

@jeffreywilliams1149 3 года назад

Great job good ideas

@CReevesMakes 3 года назад

Thank you very much! I have added a second wall and the ideas just keep coming!

@bobyar2001 5 лет назад

Well presented.

@CReevesMakes 5 лет назад

Thank you very much! I appreciate rhat

@frankmunoz2232 3 года назад

Great job

@arthurgutierrez7931 4 года назад

Love all the Ridgid products

@krissykirkendall4743 2 года назад

I have been watching so many videos on tool storage and I have liked the French cleat design but your video made it the easiest and best video. I’m very new to wood working. Could you share some of the plans like on the sand paper holder and skil saw holder etc. I can follow plans. Just not experienced enough to make them or I just doubt myself to much 🤦🏻‍♀️

@CReevesMakes 2 года назад

Hey Krissy! Thanks for the comment and compliment! You can email me at creevesmakes@gmail.com and we can chat about the holders.

@BruceAUlrich 6 лет назад

Looks like a nice solution, Casey! Nice job.

@CReevesMakes 6 лет назад

Thanks a lot Bruce! It’s amazing having everything right here and tidy. I only get a few hours a week in the shop and it pays to have it organized. Thanks again!

@Andy-te6jj 6 лет назад

it is! just build your tool holder and hang them wherever you want it's a way easier to organize your shop once you have it you don't wanna miss it!

@CReevesMakes 6 лет назад

Thanks! 👍🏻👍🏻

@jaomap 5 лет назад

love the tools you have🙂

@CReevesMakes 5 лет назад

Thanks!

@BronkBuilt 6 лет назад

Great job! For the life of me I don't know why I don't get off my butt and build a large wall of these. I have the wall sitting there calling me to do it and I need it. Maybe you'll be the inspiration I need.

@CReevesMakes 6 лет назад

Good luck! 👍🏻👍🏻

@williamoloughlin8298 4 года назад

i did, saw this vid and built it, blue background and all. I've also added a hanging wall 1200mmx1200mm at the end for common hand tools, which adds a lot more cleat space. The hanging wall just sits on gate gudgeons via gate hinge straps. Its a great system and thanks coz I have the garage back. Only problem is with all the tools on the wall, its basically an easy shop for the burglar once they get in the garage. cheers and thanks from NZ.

5 лет назад

Hello there. nice instrument board .. excitedly watched .. was very nice. thank you. huge greetings... This is my second watch and it's great...

@CReevesMakes 5 лет назад

Thank you very much! I appreciate it

@Recake 4 года назад

I started making my French cleat wall today and found your video very helpful. This is the second time that I have used purebond plywood and I find that it is not very router or sander friendly. The top veneer has a tendency of splintering. I like the look of the product, was wondering if you have experienced similar issues. I enjoy your channel and admire your craftsmanship. Thanks

@CReevesMakes 4 года назад

Hey there and congrats on your new French cleat wall! I have noticed while crosscutting the maple, that I get tearing. What I started doing was, marking my line, then running a razor knife over it to score the cut. This will eliminate the tearing in the workpiece side. The waste side will still get some tearing unless you score that as well.

@aion2177 4 года назад

very good looking :) Thank you :)

@CReevesMakes 4 года назад

Thank you! Cheers!

@CHIBA280CRV 5 лет назад

Fantastic job thanks

@CReevesMakes 5 лет назад

Thank you very much for watching! I am actually working on organizing more of the shop and plan to add a whole 4x8' section of French Cleats! Whew! Lots of work!

@chickenguru4 6 лет назад

Looks great. I’m a Ridgid fan too

@CReevesMakes 6 лет назад

Thanks! Building a second wall to expand my collection! 👍🏻👍🏻

@WorkingTimbersCo 6 лет назад

Nice build man. Digging the custom holders!

@CReevesMakes 6 лет назад

Thanks! They are fun to make and very handy!

@muhammadkashif9156 5 лет назад

Love it.. u seems like a guy with machines

@CReevesMakes 5 лет назад

Thank you! I love my tools!

@edvardschock9739 6 лет назад

Looks awesome

@CReevesMakes 6 лет назад

Thanks!

@SaburZero 5 лет назад

loving this

@CReevesMakes 5 лет назад

Thank you very much! I am actually going to build ANOTHER BIGGER one to the left of the window! I love having the cleat wall and think that the pegboard is on the outs for sure.