Amazon Affiliate Link: amzn.to/3p6Hqf4 I have a Crestron UC MX50-T FLEX system with me today. Ill go over the install, setup and configuration. Crestron FLEX install mentioned during the video. • Crestron Flex Install ...
Hi Frank! Great Video! Are you able to publish these videos in 1080 resolution (instead of 720) for better sharpness? If so, please consider making your future videos in 1080. Thank you!
USB b port on the mercury is broken. Do it make any issue. I am getting issue in connecting to monitor in the conference. Can you please me with these?
Eric, sorry for the delayed reply. I only have one client using the FLEX systems and they don’t use macs so I did not have an answer for you. Yesterday I went by our most recent install and took my mac. Everything worked fine. It’s a UC-CX100-T system in this room. I should have a video of that, with a mac, up by 4pm est today. Thanks for the question.
If you use the Zoom version (UC-MX50-Z) and set up a zoom room, can you also simply plug into the HDMI that goes into the Mercury chassis and display content on screen from a laptop without entering into a Zoom meeting? Or can you only share content if you're joined into the Zoom room?
I have never set up a system with zoom, but I do not see why it would be different than the teams version. If you plug into the hdmi that is connected to the Mercury, your content will appear on the screen weather you are in a zoom call or not.
Hi thanks for sharing. My company is purchasing 5 of the UC MX50-T. Your video was very helpful and informative. Have you integrated any one of these with regular phone dialing (VoIP) Thanks again
There is a dial pad built into the UI. Once it is installed you can remove whatever conference phone that is currently in your room and dial out directly from the Mercury.
Hello, if the grouping for the rooms does not work and when I click on the group and then the room and the colors don’t change - I rebooted the panels as well as the Creston in the server room, same issue - what could be the problem?
Thank you for the demo, very informative. Can I add more than one USB camera on Flex with MTR? How can I put camera control on the touch panel especially if I use Logitech Rally PTZ camera? Thank you in advance.
Out of the box, only one USB camera is supported for VC with a second to be used as a "Content" camera. For PTZ control, you'll need a separate controller to integrate into the system, such as a Crestron controller or QSYS core.
Not to this particular set up. You can actually do away with those microphones and just use the microphone on the mercury. If you want to add additional microphones to the mercury Crestron sells them. If you want to use the current microphones that you have you have to add a DSP to the system. Check out my UC-CX100-T video.
These rooms have Skype for Business on them. The number of attendees is determined by the subscription that you pay for. As far as how many people can fit in the room physically, that depends on your state Covid compliance numbers... I would not recommend a conference table that seats much more than 20. Once you get into a larger room, you need to look into the custom solutions that Crestron offers. You can incorporate things like a Pro3 controller, a DSP and mics and speakers in the ceiling. I recommend the Shure MXA910 ceiling mics. They are amazing.
My client that uses the FLEX system does not use Mac’s. But I did test a MacBook Pro with the new UC-CX100-T BYOD system and it worked just fine. I have a short video on that system which will be posted later today.