CRF250F Front suspension Upgrade / Mod - Bruce's Suspension: What to do when things go wrong!

Подписаться 132

Просмотров 6 тыс.

50% 1

Things don't always go right when working on a bike. After 2 hours of being unable to get the first bolt loosened on the CRF250f forks, Bruce saved the day with a simple tip to use a chisel to tap the bolt loose.
0:00 Front Fork Removal
2:16 Fork Internals Removal and Drain
3:43 New Internals Fork Component Prep
4:09 New Internals Fork Install
4:56 Adding Fork Oil
6:13 Final Fork Install and Clean Up
www.brucessuspension.net/ - 704-637-3675
On the front suspension the following parts were upgraded: Upgraded Damper Rods/Flutes, Flute Extenders, Heavy Fork Springs, Front Fork Extenders
FRONT FORK EXTENDERS - hyperlitemoto.com/products/ho...
Torque Specs:
Front Axle: (40 ft/lbs)
Triple Clamp Pinch Bolts: (20 ft/lbs)
Front Brake Caliper Mounting Bolts: (20 ft/lbs)
Fork Caps: (17 ft/lbs)
Front Axle Locking Nuts: (9 ft/lbs)
Front Break Hose Clamp Bolt: (7 ft/lbs)
Link to other specs: drive.google.com/drive/folder...

Авто/Мото

Опубликовано:

21 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 12

@stevef8065 Год назад

Excellent video.......I’m so glad you did this. Great you had issues and corrected them on camera.

@Garagehype199 11 месяцев назад

Thanks, I was very reluctant to use a chisel as Bruce had suggested... But it worked like a charm. I have no idea how a dealer would get those bolts off without damaging them. They were very soft/cheap... even without heating them up they were slipping.

@thetruthserum2816 11 месяцев назад

@@Garagehype199 If I cross this bridge, I may try a hammer drill to break it free... and new crush washers. Another video suggests "all the bolts are too tight from the factory" on the 250F... they advised touching all the bolts on the bike when it's new to prevent the down the road headaches... perhaps the factory uses hammer drills to assemble the bike.

@Garagehype199 11 месяцев назад

@@thetruthserum2816 let me know how it works. Bruce said using the same crush washers would be fine, and it worked out. No leaks. But they're cheap enough to be worth not having a headache and have to put a project on hold.

@aikiatkinson8687 4 месяца назад

Great video. Can you let us know where you bought the flute extenders?

@aldizzlecabrera 9 месяцев назад

Do you recommend these longe bbr springs over the hyperlite 46k springs (15% stiffer than stock) that are stock length?.

@Garagehype199 5 месяцев назад

I can't speak to a comparison since I haven't used both, but based on Bruce's recs (he is a suspension god) for my height / weight I would need the longer springs. The upgrades made a world of difference.... I have a beta 300rr as well and depending on what I am riding I prefer my 250f... with the suspension upgrade it does anything enduro-y minus the massive hills and its such a play bike you can throw around not have to worry about breaking.

@wizattitude 10 месяцев назад

Nice vid, don't forget to do fork alignment

@oneeyehunter8248 8 месяцев назад

Whats the cost for the upgrade?

@Garagehype199 5 месяцев назад

For front and rear it was about 900-1000. Made all the difference in the world.

@cwalton56 11 месяцев назад

Let us know how it works for you.

@Garagehype199 11 месяцев назад

I plan on it! Wanna get a few more rides in before I talk about it. Preliminarily though... It definitely stiffens the bike up and I haven't bottomed out yet