Need to get up to date on this? Give me your thoughts down below 👇🏼 VIDEO 1: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IxsEFOfzPXQ.html VIDEO 2: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GG-UbXpiEpQ.html
Thank you for letting me know that I wasn’t starting to go crazy and not know how to work with Design Space. I did have to get a new computer because of system requirements last month just to run Design Space, which was annoying. I use Cricut for hobby. So I thought I was forgetting how to use the software. Thank you again for letting me know it’s not me.
I go my cricut maker 3 as a gift for Christmas. I’ve done two projects that cut without a hitch. I purchased SVG files & tried to upload & cut it takes too long to upload & when it does it’s not what it’s supposed to be. I’m starting to wish I never asked for a Cricut. What’s the point of paying for something that doesn’t work correctly. I was so excited to make all these wonderful things & each time I try it’s more frustrating to the point that I’ll go weeks without trying to use it.
I can attest to being one of the successful crafters when it comes to print and cut.....However, THE PART THEY AREN'T SEEING is the 3 or 4 files I tried before I finally landed on one that would work in DS. There in lies the problem! Thank you Tanner for holding them accountable. I agree with everything you've said. I also believe they have a great product, but at the same time, for the money spent by those millions of people, there should not be so many glitches.
As a new Cricut user I have been disappointed so far. My first machine was faulty the day I picked it up from the shop and had to be replaced straight out of the box. Now on my second Joy Xtra just a few days in the plain vinyl cutting is working fine but making stickers is almost impossible at present. The Design Space for me has been painfully slow and stalling often when working with print and cut. Creating contours with PNG designs is hit and miss (often stalling) and I have some stickers that have been cut in half when running through the machine. A waste of time and materials at present. I'm running this with a Mac mini running Sonoma with more than the minimum requirements. I'm now looking at the possibility of doing the contour work in Affinity Designer instead and then importing those PNG's back into Design Space.
Yes!! We don’t need new machines every 8 months. Just get the softy to actually run and not have to do an update every single time I go to make something.
I have some craft PTSD. I get a few times a month to craft and I dread turning on my Cricut because there will most likely be some update I have to run before I can simply run a cut. I don’t do anything fancy. I make t shirts for friends and family noting complicated. So frustrating when it will take 45 minutes to make/cut a ‘Birthday Girl’ HTV. My computer is up to date for other work things I do. Sorry for the rant but happy to see I’m not the only one. I feel like I’m getting gaslighted if I question things on other sites. I appreciate your honesty.
I switched to Silhouette this past month after being solely a cricut user for many years. Let me tell you, yes these are excuses! Cuz Silhouette design studio WORKS FLAWLESSLY!! They are able to manage it no matter os, windows whatever. I'm a Silhouette convert now!! Love it. I love that it just works and is so easy, and was less frustrating. I also love their pricing model. I have no idea why people haven't been singing Silhouettes praises to the rooftops??! It's insane. I only started with cricut because I thought they were better, but turns out they're not. 🤷♀️
It’s also hard to navigate design space when you’re a newbie and thinking you’re doing something wrong when it’s really a Cricut problem. TY for all the information you provide.
I love when I go to move something and even though it's locked, I grab it, and it smashes down completely so I cannot grab the corners to fix it, or even go back a step. When I do try to go back a step, often it will dissappear and freeze so I have to start all over again! It's so annoying, frustrating and I end up thinking this isn't worth it! I absolutely LOVE my cricut but it's becoming an absolute slap in the face for all the money, loyalty and support I have given to this company!
Totally agree. I am actually looking at alternative design platforms. There are other ones out there that seem to be VERY good. Sad, because I've been an Access subscriber since the DAY I hooked up my Maker 3.
I feel the same way! I thought it was my pc … now I’m seeing others have similar issues. I have also noticed the cuts are too deep. I upgraded from an expression 🤪 to a Maker before the updates… I was loving it…. Not so much love now
Tanner, I'm thankful that you are being an advocate for us with Cricut. Here is my honest opinion on the video and Cricut's response: 1) I don't care that they mentioned "system requirements" that's just a bit of corporate cya 2) Cricut stating that tons of people have successfully completed projects is disappointing. I have completed projects but AFTER dealing with the issues and at times having to close out of Design Space to try again later. 3) Design Space is by far the easiest program to use. (I have tried to get familiar with Canva and Inkscape but find them much more difficult) 4) I think the live sessions with Cricut are a great idea and will go a long way to getting issues resolved. Please keep holding their feet to the fire so that we get the best program we can. Love you Tanner !!!!
I run on a gamer set up with a high end processer and graphics card and I never have issues running ANY software, except Design Space! The CEO saying to make sure we have the correct "system requirements!" Like, Sir, if my games and other software doesn't lag, your software should be just fine, so why isn't it? Also, there should be extensive testing BEFORE putting out the beta. Hire better programmers, and let them run the alpha tests with a select few with different operating systems. Once those bugs are fixed (because we all know there will be some), then, and only then, let the beta start. Most bugs should be fixed prior to the beta release. The beta is usually to test how the software performs on wide-spread use. I get the feeling they don't understand the tech side of the business, and that's okay, just hire people who do.
As an auto mechanic I was taught to verify clients complaints, repair complaints and verify repair. I’m not stating I know everything about the issues, just wanted to point out there is a flow chart for repairs
YES!!! You do understand!!! You need to see what it is doing so you can change it, fix it, and/or make it do what the customer wants it to do. Good way to explain what I said in a huge post. Thank you!!!!
You can't download the circuit design space without having the minimum requirements,that is not the problem it's always issues with DS. I'm a newbie and it's discouraging I really am thinking about returning it but don't want to because it was a gift from my son.
Excuses for sure. They’re seeing “successful” cuts because us crafters are persistent in getting our projects done and will keep trying in till it works. Silhouette doesn’t seem to have these problems
I have no issues with my Silhouette machines. I still have my original Cameo and it works amazing after all these years, and my Cameo 4 works amazingly too. I gave up on Cricut years ago, and I'll never go back to their cutting machines.
They mention that millions of Cricut users cut their projects seamlessly, but to get to the point where you can finally hit "make" takes FOREVER because of all the glitches. AND, if Design Space is running this poorly in Q1, imagine what it'll be like in Q4 if they don't work out the bugs.
I agree with this. I made a project this morning and had to restart three times before I could finish cutting the three mats!! Millions of projects may have been cut but the time it takes is a bigger issue.
I am curious how many software designers/developers/engineers ECT that cricut has gone thru since Design Space came out. A lot of times, when I go to use Design Space to create something, I am quickly reminded why I learned how to just make my own SVG's so that having to use Design Space is kept to a minimum. Saves me time and frustration every time. Don't get me wrong, I do love the machines and have a lot of fun using it, but it'd be nice if cricut would just get their tech stuff together right! It's not rocket science and like everyone is saying, it's not tiny issues, it's the same issues all the time, come on!
I agree! In my own comment yesterday I shared that a successful cut does not equal a problem-free session which is a very important distinction to make - thank you for sharing this same point 🙂
Hi Tanner. I appreciate your response to Cricut. I also work in IT. I am a Scrum Master with a Development Team. I also understand the response from Cricut. Unfortunately, most people who are reporting errors are unable to send an error log or a test path on how you reached the error. Without that information they have to be able to recreate on their own. This is almost always the reason for delays in addressing issues. I know that my team at work gets highly frustrated when we can not fix the issue for our clients - I suspect it is the same for them. Additionally, the coding for different operating systems is completely different. I do understand the frustration on their end. I know it seems like a long time you have been waiting however, if you haven’t been on a development team during a lifecycle of a fix it is hard to explain why it appears to takes so much time. I hope that helps with understanding. Thanks
I use to test custom accounting software and everything you said is 💯% correct. It makes me wonder do they have a separate person (s) test the software? I found that when the programmer tested the software they wouldn't find the issue. In doing tech support as well for the product I had to figure out what series of actions did the customer do to get the glitches. I understand it's a lot of work but as a user it's frustrating.
I worked as a tech for a major computer and peripherals company a thousand years ago, so I truly understand how frustrating it is to not be able to sort out customer issues...I think this is what makes me angrier now because many of the issues the customers were facing were recurring product wide and rather than fix the issues, they would make them to be 'user error' instead of accepting responsibility for and fixing the crap they put out...kind of exactly the same as we see right now. My question regarding your post is...why is it that most people who are reporting errors are unable to send an error log or a test path? You'd think that a program that boasts millions of users would generate user friendly event logs that can be accessed and sent to Design Space developers. I'm not programmer level computer savvy, but I'm by no means a rookie and I can't find an event log let alone send one. I've even reached out to top level Windows IT folks and been told it depends on what the developers allow/offer...well, we've been allowed and offered nothing but excuses...would it not make more sense to develop this option and SEE what is causing the errors rather than wasting so much time trying to reproduce them? I admit, I could be way off base, but research tells me I'm probably not. Sorry for the grump.
@@woodservices Those of us that have worked tech/IT/beta testers are all saying the same thing. I have found that when programmers test software they wrote they test it they way they wrote it. As beta testers your able to go in and test the product as a user. You can record the test path because your able to recreate the glitches multiple times. It's very frustrating because in my opinion they make the users feel like they're not smart enough to understand what's going on and that the user is the problem. Yes, as users we're training ourselves how to work around the issues. Don't get me wrong I love my cricut but not happy with design space these days.
Tanner I agree with you 100 percent. I put my machine away out of frustration working sometimes hours only for the machine to freeze. Other issues you've mentioned are also frustrating. Cricut needs to get their act together. As far as error logs - let's get real. If your a designer you test everything on everything, not just how you've programmed the system to work. Yep other machines are coming on line and I'm seriously looking.
A couple of thoughts for you , Tanner: I have been teaching in-person classes for 15+ years (some people just can’t learn from videos btw). I have experienced more glitches and issues while teaching in the last 3 months than since Cricut moved to a desktop application platform several years ago. I have actually put off scheduling some classes because I don’t feel like the system is reliable enough right now. Plus, the constant updates are confusing people too much! I don’t want to teach a classroom of users and then an update come out and make the Design Space unrecognizable for them practically over night. I was really confused because the multi-layer feature came out in Beta literally hours after the Cricut CEO released that first post. I know Beta is for testing purposes but there are a lot of people who work exclusively in Beta now. My latest glitch is that when I change a font or image, nothing changes until I click on the grid screen. Lastly, while the software issues are frustrating, I feel there are more concerning physical issues with the machines that need to be addressed. I just got a Maker 3 to bridge into engraving. The test cut with vinyl didn’t even scratch the surface. I know enough to research to find a fix - basically the vinyl cut settings were set way too low and I had to manually go in and change all the numbers. But if I had been a brand-new users, I would have probably been so frustrated and tossed the machine into the closet. Apparently there are lots of known issues with the Maker 3. Plus all the problems with the rollers deforming on the original Maker. I have renamed my Air 2 and now call her Old Trusty! Keep asking the questions so the rest of us don’t think we are nuts!
That's just a crying shame. I'm sorry you are having to deal with this. I am a classroom teacher and I have thought about going "on the road" with my Cricut as well to employ a similar model to what you are likely doing. The idea of dealing with the issues you just stated is DEFINITELY a deterrent.
I’m ready to return the 2 Cricut makers I just purchased for myself and a friend. We are older and I definitely don’t want this hassle! I’m so sorry for you and Tanner and all the other instructors ❤ It’s affecting YOUR INCOME! I’m not very impressed with the CEO response.
Slow down on the new machines and spend more time on making sure your software works correctly for the machines that you have out on the market. When I go to weekend retreats, I don’t want to have to deal with software updates so I take my old cricket machine with the cartridges just to avoid any complications.
I am a graphic designer well versed in Adobe, Autodesk, and other design software. I am a new Cricut user and have been so frustrated and disheartened with the whole process. Frankly, I thought it was a new user error so I came to this channel to learn best practices. I was relieved to learn it wasn’t just me having trouble but fearful I have wasted money on what I thought was going to be a fun experience.
The CEO is more concerned about profit and not who got them where they are today! They are operating as an Equity group where they could care less about the users.
They could save themselves a ton of problems by not trying to make the same software run on different platforms. Make one for iOS, make one for Windows, and others for other platforms as needed. Keep the teams separate. And above all, stop requiring every little command to go through the internet to a central server! I’ll bet 90% of the problems are bandwidth-related, as most certainly are the frustrating delays.
I agree with a lot of the responses. Saw an update about week ago, still freezing while moving the when click off it jumps, the issue with fonts & offset not changing til click off. I think I will have to write down problems ea time use. I also agree that cuts usually go good once you get to that point, but pain & time to get there is way too frustrating. Thank you for sticking with this & updating us.
Here's the thing Tanner. Yes, we are cutting projects in spite of the issues. It gets so frustrating at times I actually have to shutdown design space and try another day. I have to figure out work around on my own or with the help your videos. I'm so glad that for one I'm not the only one still having issues. I had many of the issues you were having in the first video. Then I got an update and landed up getting more of the issues that were on your list. Yay they are giving us more fonts and images but these bugs in design space can be very frustrating. It sometimes acts like it goes to nowhere land because it hesitates when making changes. I had a problem with a font where when I first typed up the quote I wanted the spacing was perfect. Then I save it to work on it another day and I realized I either misspelled a word. So when I went to fix the word all of a sudden when I pressed the space bar after the word it wouldn't put it on design space. But when I looked at the information panel on the side I can see my space between the word. So I think maybe design space is just wacky today and tried to print sure enough the word I fixed was running into the next word. I LOVE my cricut it allows me to be so creative and as I gain confidence I learn how to do other things with it. I hope they stop passing the buck and just fix it.
I feel you!! I created extensive graphics and text with weeding boxes for a client’s yard signs for their business. Hours of work as it was multiple layers. Saved it. Take it to my studio to cut the following day. The project comes up in My Stuff, looks good in the file image, open to customize and make it, all the weeding boxes are gone. Just gone. Even though they show in the image of the file and in the layers box, they are NOT on the canvas nor on the mats in cut mode. They have never reappeared though they were saved in the cloud and offline. I had to redo all of it. 🤦🏼♀️
@@madisonmansion Yes I've had a similar issue that you see it on My Stuff but it's gone. It's frustrating and weird. That shouldn't happen especially that you saved it. It's as if the file got corrupted while it was saving. I'm sorry that happened to you. Sounds like you put a lot work into your client's yard signs. Hopefully Cricut can get it together soon.
Cricut and Ashish are the masters of saving face by saying the right words yet deflecting to something else. He states they take accountability and spend the rest of the post explaining and deflecting that the issues is not a system wide issue, just an issue with “you and your system”. The problem is most people will not report the issue, they just accept it and move on. This has been an issue that has been an issue FOR YEARS!!!!!! It is frustrating because it is usually “we know we have software issues, but look over here at this new machine!” So they have reports that tell them what users are not having issues, but not a report of the issues design space is creating!? 😅
I have some similar thoughts. Just because there are many people using the machines with the end result of a completed project, does not mean that they didn't have issues in achieving that result. Some people are so used to the workarounds that they aren't even thinking about it. Others don't have the energy to complain/explain the issue. I have problems all the time but I can't always articulate the problem. I think the next time I use CDS I will try to pay attention to all of the glitches, etc. And maybe take pictures to send to the company. I do believe it is kind of lame to subtly blame the users because even then, they still bare some responsibility because of the lack of training/guidance that they provide for their machines. 🤷🏽♀️🤦🏾♀️
Design space keeps bogging down. The past few months have been horrible as a maker and trying to make product for my business. I have had lockups and infinite lags trying to save my projects. I don’t know what changed a few months back but the gremlins are still in the software.
I actually stopped using my cricut and I got a Siser Julliete no more problems lol . It was losing multiple projects after upgrading . I do a lot of designs and don't have time to wait.
I went down the aisle at Michaels and was so surprised to see the Juliette. That was new to me. I haven’t used a cutting machine in years but I had Cricut 1 and silhouette cameo 1. 😂
Thank you for sticking with this. I am continuing to have print and cut issues with Cricut. I do also own a Brother Scan n Cut and a Silhouette Cameo and it has gotten to the point where I have stuck the Cricut in the corner and use one of my other machines. Although my Cricut does much better cuts it’s just not worth the frustration of dealing with the glitches to try to make it work. When I hear that bugs are actually being fixed I will probably go back to my Cricut but until then I can get Disney designs for my Scan n Cut and that is the only thing I don’t do with my Silhouette.
The millions of designs that have been cut I’m sure were problematic. Just over half weren’t reported. I just roll with it myself cause I haven’t had issues fixed that were reported yet. Seems like just more issues.
I do not understand why Cricut is ‘game playing’ regarding their Design Space app. I’ve been looking towards getting a different machine since Cricut is NOT demonstrating a true concern for their users. It seems like their concerns are toward the ongoing new machine sales outweighing the need to truly ‘fix’ the issues. I’ve been having more troubles with my maker recently and I’m not quite ready to buy the Juliet cutter but that’s where I’m headed unless Cricut FIXES Design Space. I’m a bit annoyed with the Cricut team as I have invested a lot into their machines etc. Sad and majorly disappointed.
I was working in DS last night and the night before. It KEPT crashing and recycling last night, like a reload without my permission! No (more) issue with the 12 x 24 mat thing BUT, night before last (sat 4/20/24) I was trying to use the cricut card mat. Every time I clicked make it the card mat showed up but was not available for me to choose! I must have tried at least 10 times before I decided NOT to use the card mat but just cut on a regular mat and make my cards in a different way. Of course when I clicked make it, the card mat was available. I'm beginning to hate DS. Just remembered, the night DS kept reloading, it took me more than 4 hours to make 6 very simple cards. I literally felt drained when I came out of my craft room!
I don’t even use my cricut anymore because of all the issues. I now go to my other cutter and don’t have any issues and am more productive now. I won’t invest another penny into cricut and plan on selling all of my cricut machines which is sad because I always spoke and highly recommended them
Same here. Got one of the original machines and added 2 more cricuts. Was going to upgrade to maker 3, but in one sentence it's my newer computer, next sentence there a fixing something millions of users don't have a problem with 🤔 ...so it's the machines.... love my cameo 5. Just works, nice clean cuts. No way I'm buying new computer every year or try to figure out if it's the maker 3 that's the problem. I just want to create.
I've been having issues in Cricut DS every time I get on. It's so frustrating that it makes me not want to use my machines. Which is even more frustrating because I've got lots of money in to these machines just like everyone else. All the problems you listed and others. So yes, I hope Cricut takes their time and addresses these issues before putting out more updates. We shall see. I love my machines-I love Cricut, but with being digital...then DS needs to work for us all. So I sure hope they take action, but as of yet...I haven't seen any. 😪
Thanks again Tyler for being our voice.❤️ …I’m curious where all of the money they’re making is going if it’s not in their software… Silloutte never seems to have problems with their software. Not like Cricut does. Cricut always says they’re listening but clearly they’re not. … I think the majority of users only still like them because we so comfortable with using it. Honestly I feel like it’s more of a hassle to print and cut anything with their machine anymore. 😕
I totally understand all of your concerns. I used to be a software tester. That being said, I, unfortunately have not been able to use my machines in a very long time and am not aware of the bugs you are seeing. But, as a professional tester I do know how difficult it is to replicate a bug. I also know how difficult it is for a programmer to fix one tiny item without affecting something(s) that may be much more important. Honestly, you have no idea how many times this happens. Here are some items to include in order to make make replication easier: 1. System Settings 2. Personal Cricut options 3. The browser you are using 4. Any other open applications 5. This is actually the most important… list the exact steps you are taking to produce the anomaly. I’m hoping this helps anyone out there 😻
Thank you Tanner, I am just an everyday crafter. I started using Cricut when I got my first machine, the Cricut Expression. I use my Explorer 2 machine, and I don’t use it every day, but enough to keep up with the updates by watching your videos. I get to frustrated trying to do a project, and think I am doing it correctly, but then there is an issue. I don’t like or want any work arounds. I just want to be able to sign into my Cricut account and create a project. I am a member of MGL, and love watching and learning from you and your team. Thank you
I am an experienced Cricut crafter and teach others how to use it. What they don’t understand is that these “seamless” cuts are taking three times as long to accomplish. For me, Design Space is running so slow or not at all, therefore, I have to reboot often. I have four different computers at home and at work that have Design Space on them. All of them have the same issues.
Unfortunately the CRICUT business model is very common. They will continue to add new products even though the current product is not performing ar 100%. Unitl thier bottom line is affected nothing will change. Thank you for sharing your thoughts and concerns.
Exactly. It's why I decided back in 2021 to not buy anything else from cricut. I don't buy subscribes, fonts, materials. I just use the machine and any materials that need replacing are off brand. When I get an opportunity I'm upgrading to a silhouette because cricut is full of crap with all their failed promises
Circut is not the only cutter on the market. There are many alternatives! I wish someone would code a software app that allows cricut machine to connect to it so at least we don't rely on CDS for our work...
It's totally possible, but Cricut threatens legal action against these companies. For example, Sure Cuts a Lot software used to support the Cricut cutters until they were sued.
@@TonyAndersonWebDev I use Sure Cuts a Lot 5, which allows you to save anything you import or design as an SVG, and then export it to Cricut Design Space to cut. Even their older versions were better than Design Space is now. I can do so many things with it that Cricut doesn't do, which I find kinda ridiculous. I mean, how about the simple thing that I can't italicize most of the fonts? I mean, come on! I have to italicize it in Word, screenshot it, save it as a PNG, and upload it to DS just to cut it. That's absolute nonsense. Or how about what we have to go through to "erase" parts of a design, using shapes, because there's no erase function (except for Contour, which really doesn't do enough). I should be able to do simple things that I've done for years with Sure Cuts a Lot, but despite the constant updates, I can't.
I think Cricut needs a brand new IT team and an overhaul of Design Space. Also, they need better designs. I have found myself using other options for my designs.
One of the main issues with print and cut is the calibration page that prints directly from design space is incorrect. I had a ton of issues a few months ago and after probably 100+ recalibrations and conversation with Cricut suppprt I found that if you print the calibration page directly from Cricut’s website (print at 100% scale from adobe reader) and calibrate with that it works FLAWLESSLY. Just like it used to. If you hold up that page and the one printed from design space against a light to see the difference the DS one is WAYYY OFF. I told Cricut about this and they even gave me a gift card for bringing this to their attention. As of the other day, THEY STILL HAVEN’T FIXED THIS. And that interaction and bringing it to their attention was MONTHS AGO!!! Smh!!
Interesting. We been telling people for....9 month or more to use website version. Next thing we heard cricut customer support told everyone not to it would not fix it.
Is anyone else having trouble when they use the undo feature? I’ve had to start over quite a few times because my project disappears. Now I’m afraid to use undo. Very frustrating.
I'm still experiencing lockups, items not moving where I put them, have to cut materials twice in multiple cases, etc. I am using a brand new Lenovo laptop so I am also have more than the minimum system requirements.
Cricut dominates the market and is controlled by shareholders and profit. Sorry it is true! Since they became an IPO things changed. We should not have to train work around for a machine of this caliber!
I totally agree with you Tanner! I have been so frustrated with design space. I've had nothing but issues with it, and most my experiences have made me wonder if I should have gone with a cameo instead. I honestly am getting fed up with cricut and the excuses. I hardly use design space anymore. Regretting my decision to get a cricut, and am considering switching to a cameo because I love their software!
I work closely with IT division for at my state agency. I know they do need to be able to replicate errors to find fixes for if its one user experience or multiple user issues. So i get what he is saying there because some issues need to be seen to fix. Its definitely a reality but again they should have a quality control team with various operation types to test their systems. 🤪
Our systems have the "minimum system requirements". We have been sold expensive machines that do not work properly and, in most cases, continue to pay membership fees for software that does not work properly. The "response" from Cricut sounds like it's been written by lawyers who sense a class action case being developed. Instead of admitting their products are faulty, they're foisting responsibility for failures on the users. I'm a user who's paid over $500 for a machine & supplies & memberships. I have the minimum requirements. What I don't have is a machine & software that works. What I don't like is being told that it's my fault. I've used Adobe products - the most complicated design software on the market - for 30 years without problems. Don't tell me it's my fault again, Cricut CEO. Fix your machines & your bugs or refund our money.
No changes at all, the offset takes forever to load and i just pretty much guess how its gonna look cuz i cant sit around until it decides to work oh and btw just last night I lost a whole project because it got stuck on “saving”😢
Cricut does NOT stand behind their machines. My lid on my Maker started making a popping noise and the door won’t open. I called them and they would not help me. I asked how could I fix it they just said they were sorry. I probably use it once or twice a month so it’s not like I’m beating it up for it to break. Ridiculous 😡
same. Mines out of warranty by 6 months… this was a replacement machine too for my last on that red lighted within first 12 months…. You don’t spend upwards of of £300 a time and expect to replace every 12 months, ridiculous! I am running her with the lid half open and might attempt a repair directly at some point, but it’s just so bloody frustrating
I work in tech, and I will just say from the developer perspective there’s a good chance that some of these bugs are potentially tied to bigger issues that may have been a “band-aid” to meet launch and now they have to do a true overall which would take some significant time. Not really trying to excuse the issues, just providing a different perspective. That dev team is probably working really hard right now.
PC desktop user here. I use an HP All-in-One. What does Cricut consider a successful cut? For example, I cut Print and Cut stickers with foil images. Technically, the project does cut, but the foil image is not aligned. It happens so frequently that I could log in anytime and replicate the issue. Which would be great to do to ensure it's not a user error.
Tanner I am a seasoned Cricut user. I still have my original Cricut as well as the original Explorer machine. I currently have a Cricut Joy that I use with my Android phone and a Maker 3 and Venture that I use with my Microsoft Surface. The only issues that I have experienced are related to saving and undoing previous steps. Having said that, I realize that this is only an issue when I save for offline use. As an IT security professional who is also a crafter, I know that the delay is due to the change in logging into the software. The software no longer resides on the machines. It is cloud based, and you log into a user interface. If you don't have enough RAM and a fast internet/WIFI connection, there will be a delay. I need more RAM and that's not a Cricut issue. I am not defending Cricut, but I get why they mentioned recommended system requirements. There is a huge difference between requirements and an optimized system. Both will work, one will simply work better with less issues. No two computers will always have the same reason for an error/issue so you must replicate the issue. It could be the Cricut software or it could be some other software hogging memory or even a combination of the two. Someone could have very little hard drive space left on their hard drive. A solid state drive works better than a non solid state drive. I would be curious to know if the issues are related to one operating system more or equally across all. There are distinct differences in the features offered. Just my thoughts and two cents as an IT security professional who also crafts with Cricut.
I totally get what you’re saying about the cloud based issues, the RAM issues, etc. I actually believed it was my laptop as well. I purchased a new laptop, for my crafting business only, that has SSD, more than enough RAM, also a gaming platform laptop, and I have zero issues with anything else EXCEPT design space. There are some definite issues and it can’t be that everyone has RAM, SSD, internet, etc issues. I disagree although I understand why you’d feel that way. I did also until I upgraded with no resolution to my issues
It has also occurred to me that I am also running the beta version of Design Space. Are people having issues running the beta version of Design Space? I am also wondering if many of the issues are beta related issues. If you are not running the beta version and the issues persist, then track the issues in settings so that Cricut gets the diagnostic file to help resolve the issue. I realize that glitches happen in beta and am okay with that as beta testing is necessary to work all the issues before implementing the final changes. BTW, gaming computers usually cost more because of the graphic card, which is optimized for gaming and does not translate to be better for other tasks.
Tanner I am seeing things a little differently. Firstly, on minimum requirements, I think he means they need it to work it at the very basic level. As far as recreating the problem, they have to recreate it to discover what the cause is. If you can't recreate the problem, you cannot identify the cause.
3 years ago I actually bought a new computer because my older Mac wouldn't load DS. Called & they told me to use my iPad. Worked - but do not like using the iPad. I wish Cricut actually had a way to e-mail rather than spending hours on the phone with people that don't really answer my questions adequately. An e-mail contact would allow us to actually describe our issues/or provide feedback, in detail.
I read the letters as well and quite honestly it sounded like more corporate bullsh!+...Management will never accept accountability. You're right, excuses. As much as we pay for the machines and supplies the software should be impeccable. I use many types of software for many products and the cricut software is horrid. You shouldn't have to do any work arounds. Good software is simple and intuitive. Don't release crap updates just to have an update. Have you ever looked at the updates? 90% are bug fixes...that says it all.
But see, that's the problem - once we've all bought their expensive machines and all the accessories we need to use them, they have our money, so what's their incentive to improve the software that we require to use the machines? When all they're doing is making excuses, it's easy to see what's important to them - earning profits for their shareholders.
Tanner, thank you for continuing to go to bat for all of us in the Cricut community. There are times I only have a successful cut/project after 2 hours of working to get there. Yes I make a mistakes on some occasions but part of the time consuming process is because DS isn't working smoothly...ie select undo and part of my design disappears or try to move an object and it doesn't really move, try to search a recently used font and no fonts display in the list etc. Not to mention how slow DS is to process each element I add at times or when I'm trying to save my project. Again thank you for doing these videos and for continuing to give Cricut feedback on our behalf. Speaking of feedback...I could not find anywhere on Cricut's website where I can send feedback. Can you point me in the right direction for that?
Love the machine too, but they are very slowly fixing their bugs. BUT, while you’re cutting your project, it decides to stop listing all the cut designs. For example, if there 18 mats, it will only show the first 10. Very frustrating because I have to cancel out of there then hit continue so I can see the next mat. When moving an item sometimes it looks like you moved it, but it hasn’t. So you have to go back and click on it and try to move it again. Fonts don’t stretch. Sometimes you want to elongate a font and it won’t do it. They have a long way to satisfy crafters. They need to stop creating machines and focus on making Design Space more accessible, efficient and add more shapes that we can use to create more designs.
Thank you for following through on this issue. I've invested a lot in Cricut and many others have too. I hope that they stick to having video updates on progress & of course making the necessary adjustments to make Cricut function with clarity & the simplicity we have grown to appreciate & expect.
I REALLY Appreciate you holding them accountable for Design Space issues. I am not very experienced with using Cricut, however, getting there is soooo frustrating when I know it’s not me making mistakes. I definitely know enough that I should be getting further than I am with the amount of time I put into learning design space. I have had many people check what I am doing and they are very experienced with computer programs and they say that design space is far from user friendly, they as well confirm that it’s not me making the mistakes. As others have mentioned, the undo button doesn’t work, several of my designs are about to be cut and they disappear and so on. There are just too many to problems to mention. Anyway, thanks again and I hope they listen to you and their users and fix the software. Also, thank you for your videos, they are very helpful and I enjoy learning from them.
Thank you so much Tanner for sharing this with us! I have a brand new computer , an up to date tablet and cell phone. I actually just purchased my computer hoping to eliminate /reduce the problems I was having. I think it is not correct as the saying he made that there are many that cut and design with no problems, as how can he actually say that. There are many that most likely do not message them with their problems, I for one have not communicated my issues with Cricut. I do believe they need to focus on what they have now, we do not need to add a new machine as often as they do. Let correct/update and finesse what we have! Thank you once again for keeping us up to date, you and your TEAM are fantastic!!!!
I am in the uk, and I have awful problems. Now my cricut tells me I don’t have enough minimum space on my laptop. Well I have deleted lots of programs which I don’t use and still this message pops up when I open design space. It takes forever to download,and upload projects. When when I switch to make it well I have the circle of death as I call it. I am beginning to think about cancelling my subscription.
I don't know what they did when it comes to the text box? I never had issues before. Now I experiance problems. If I am doing something wrong I wish I knew what. Sometimes the steps I use work,otherwise I can do the same thing a few days later and won't work.
me too. Using the text box today to make a calendar of the family birthdays and anniversaries for my mom for Mother's Day. I used squares and turned them 90 degrees and then attempted to make 3 text boxes, one for the date, one for the family members name and one for either B'day or Anni. Either one of the words or the number from the square I was working in would just disappear even though it showed in the layers panel and I had 27 to do. Finally got it done but was constantly saving every one or two changes. Sometimes I had to quit the program and one time I had to do both the above and reboot my computer. Honestly is text that difficult? I did report this to Cricut. Don't know if it will help or if it will change anything. I have this problem on every project I make using text boxes. Okay, I'm done ranting for now.
I use cricut on my windows computer, iPhone, and IPad. All of which are updated with the latest versions. I have had a cricut for almost 4 years. I love my machine and everything I should be able to do with it. But, for a while now I hate to use my machine. Knowing it is going to take me an hour or more to do a project that use to take 15 mins. I can no longer quickly recreate projects that I have saved. It takes forever to load them and then you have to wait again if you need to change anything and wait again after you hit “make it”. It’s frustrating. I don’t want to have to learn another machine but I’m almost to that point. I don’t have enough time in the day to sit and wait at every single step. Note I do have super fast WiFi so it isn’t that.
I stopped using my Cricut and I usually crafted 3 days a week. You know they didn't even admit any issues until you called them out on it. They still won't give updates. Why not have a known issues page so users can check to see if their issue is already being addressed and if there is a workaround. I wonder if the overall number of cuts went down in the past few months. Not very transparent IMHO
As someone who tested software, I am going to give them some grace. They need to parse the problems unique to each platform. We did need to ensure the problems reported are related to Cricut software and not user hardware or user software. Replication of issues is the way to resolve an issue. You want to be sure fixes don't break something else. Regression testing from end to end before a patch update takes time, especially with all the platforms. Not everyone keeps current with technology, making Cricut's job much harder. By the way, IT developers usually don't use the software, each development team is responsible for developing the software. A component integration testing should be done within IT to ensure all the coding and user screens work as the functional spec was written. It is up to Cricut's testing team to test the full user functionality. With the bugs and issues, there seems to be a disconnect internally within those defined rolls. They may need to grow the team to meet user expectations.
Tanner you are absolutely right! Even in the 5 days since you posted this, I have noticed the tone has definitely changed on the cricuit Facebook page. Anyone who expresses a concern immediately gets jumped on by other users telling them their DS runs fine and it must be user error. The CEO is doing too many posts telling how great everything is and how great everyone is doing on the team. For example, just saw a post where the lady cut a project, took a a coffee break, came back and had to update and it stopped working. They pressured her for screenshots of the ram and she posted and far exceeded the minimum. She had 32 or 64 ram. Admin shut down comments without acknowledging she was right or anything.
I use the cable instead of Bluetooth with my Explore 3 for better connectivity and not getting dropped. If the machine is idle for more than 10 minutes and then I start the next job, it quicks halfway, usually doing the writing but not cutting. I get the red message saying I have to unplug my machine. It automatically kicks my mat out. This is extremely frustrating. I now make sure I turn off my machine after each job. I shouldn’t have to do that.
Thank you, Tanner, for your time in trying to get cricut to fix its bugs in design space, I hope they do find fixes, sorry to say evertime u get and update 5 others things go wrong, I love my cricut and glad that design space if free. I get that there are different operating systems, and they all perform differently. Married to a computer technician I understand how hard things are,ty
So, having said that above, many of the things that happen are annoying and slow crafters down, like the mat preset at 12 x ,24 while others are just work stoppage when offset doesn't work or takes 5 mins on even a simple design. The cursor not moving at all then zipping across the page is ridiculous and that happens often. I no longer run other applications while using my Cricut and recently moved a ton of files onto am external hard drive just to see if Cricut DS would work at its previous speed. However, I thing with so many machines and so many operating systems, it will take them a good long while to correct them all.
I would love a design space program that once downloaded it can be operated off line. Lots of us don’t have the money to spend hours on line. Should only be for updates and searching for cricut designs.
I have owned my Cricut Maker for almost four years. I have recently downloaded the free version of Silhouette mainly to get around the limited Print n Cut sizes offered by Cricut when printing sublimation projects. I do like being able to print a full 81/2 x 11 or larger when needed and not to be limited to Cricut printable sizes. Though I do like some of the features that each provide I am no where near switching over from Cricut at this time. My thanks do go out to Silhoutte for offering their format to us.
I know yesterday while trying to create, DS was laging to the point I just had to walk away. I was trying to downsize an image into the tool bar and the image was several seconds behind. Then I could not grab the image to move it. So frustrating!
Tanner, I have seen all three of the videos you have done on the Cricut's Design Space issues and I greatly appreciate your honesty, integrity, and sincerity. Holding Cricut accountable is the only proper course of action. I have someone coming to my house on April 27th to check out Cricut before she purchases one. I have to be honest with her and tell her the difficulties Cricut users are having. I honestly don't feel I can recommend the product to anybody at this time.
I find it very dishearting that the CEO of such a huge company like Cricut is essentially hiding behind the standard excuses like system requirements. Real die hard Cricut users will know their system requirements and find that insulting. Thank you Tanner for holding him accountable! Cricut Members pay for Design Space and when it works it really great but since the updates it drives most users to use other software like Canva, Inkspace, Word, Adobe, Etc. Anish needs to address this now before his community leaves him for good!
Cricut is just making excuses. I have had daily issues and spend hours doing projects due to software issues. Cricut needs to step up and fix these issues. I appreciate your voice because not everyone takes the time to report issues and just finds ways to work around their issues. I just hope cricut will actually put the effort into making design space what we all expect it to be! I do not feel anyone should have to be paying to use design space when there are so many issues. I have actually contacted Cricut and asked for a refund stating the software doesn't work as it should and was told I could not get a refund. Thank you for speaking up!
I thank you for your remarks, yet I respectfully disagree with the progress on DS that Cricut is doing. I bought my Maker on your recommendation when you were on the nationwide tour, and made a LOT of beautiful things on my machine when I first started, and recommended the Maker to my fellow crafters. After a few years, the Print then Cut function and calibration stopped working altogether, and after quite a few costly mistakes, I went with another brand. Was there a learning curve? Absolutely. Thing is the things I could no longer do on my Maker, I learned to do on my new machine within hours of setup. The feedback we give from the WEEKLY lives had been incorporated into new updates. Please continue to hold Cricut accountable, and I really do hope that they step their game up, or they will be certainly left behind.
I made it to the end of the video. Thank you Tanner for the update and speaking up for all us cricut users. Personally the jab about users minimum requirements is a cop out. From previous experience be it creating a web pages or a game on JavaScript, the testing we had to do was a fair bit. Given it to a range of testers, ie; different age groups, computer experience.....and essentially see if you can break it. The issues we.re all having shouldnt have to be replicated, they should have mostly if not all shown up on the testing side before the roll out of any new updates. I appreciate that there is many platforms for these to be rolled out on and the testing can be time consuming but by that reckoning, focus on the testing. Flawless cuts, whats the time scale here? Press make it n thats you sorted. Say two three mins, where as i could still have a flawless cut. But have had to go through the frustration of Design Space lagging or its kicked out my machine etc...
Design space for me is still so unstable. I was trying to do a simple text project and after about 25-30 minutes, I gave up. The text box would not convert so I could start to type. When I did get it to convert, the text would jump around and sometimes disappear, it was so incredibility frustrating! I have a brand-new desktop computer so I am sure that my system requirements are good, so what else is there to blame but Design Space? Cricut, you need to do better!
A random stranger, lovely lady, approached me and a friend in the Cricut aisle of a craft store about 3 weeks ago. She has a Scan N Cut but has also been thinking about getting a Cricut. She struggles with the SNC and was hoping the Cricut would be easier. She struggles with tech. I am new to Cricut...too new to notice bugs/glitches. But I could definitely tell her that Design Space is NOT intuitive or user friendly. I normally don't have problems figuring out new software. I am not afraid of learning new things. But DS is crazy ridiculous. It is ridiculous that Cricut requires (by complexity of design, not by mandate) that there be folks like you and others to teach us how to use DS. The machines themselves aren't an issue...it's DS. Not that I'm saying it should be totally dumbed down - all those customizing features are important and if you can figure them out, I imagine they are super helpful. It should be Cricut who has a user guide / how-to for each machine, not random folks like yourselves creating things to fill in Cricut's glaring gap. I had to BUY a detailed user guide from another maker when, for the price we pay for the machine, there should be one included, even if just digital, for each machine. All I have found from my machines is just instructions for how to set them up and cut the samples. My old $15 alarm clock radio from Walmart included more instructions. That said...maybe I'm not that target audience? Maybe DS is SUPPOSED to just be for professionals...like Photoshop and different other design software? The Cricut marketing makes it seem like it should be for anybody, but the complexity and lack of easy-to-find how-tos from Cricut seem to indicate the opposite. I dunno. Either way, it's a missed opportunity. Channels like this should only need to exist to SUPPLEMENT already-great support/instructions from the product company. But the reality is, if channels like this didn't exist (thank you!!!!), many of us wouldn't be able to use our machines at all. I don't use mine as often as I'd like because of that. Which brings another question: Perhaps, despite what the CEO said in the posts, they are satisfied once we've bought the machines. Perhaps it doesn't matter if a bunch of them sit idly, under a cover of dust, in a closet somewhere because DS is too daunting to figure out once the moneyhas been spent to purchase them?
This appears to be a case of their actions speaking so loud that I can't hear the words they are saying! All the lingo "sounds" right, but so far I haven't "seen" anything that indicates they are actually trying to fix the problems. The success rate of cuts in March is NOT a reflection of their work fixing thd problems. It's a reflection on the determined, crafty and resourceful users figuring out how to make it jt work despite all the issues.
I bought a referb machine. It got her today. I have faith that they will fix the problems soon!!!! I will run mine off a $100 Mac! I’m leaving their competitor. I hope it happens soon!!!!! I’m changing because of you. I will not blame you if they don’t fix the issues. Your files are great!
Good luck. I lost faith in cricut back in 2021 and it's been slowly going up in flames since. Just when you think it can't get any worse "Oh, there's another broken promise and childish gaslighting from the company."
I agree with all of your concerns and issues, but I will add from the perspective of a software developer that while seeing the error on someone else's screen is helpful in locating where an issue appears in the GUI, it does not always help in replicating the error in the code base where it will have to be fixed. What you have provided them will no doubt speed them to a solution, but developers still have to be able to replicate code errors in order to fix them, so don't give them too much grief for that. Saying they are replicating is just due diligence to make sure they fix the right thing without creating more problems. I do thank you for everything you do to help the community, other crafters and even Cricut (though they may not always see it that way:) )
I wish I could like your comment 100 times lol I never post on RU-vid but as Software tester, this video made me wince. I know users don't understand how much work goes into producing bug free software and how much information we need to fix an issue but it's painful to hear a company being criticized for just saying they need to recreate an issue. To the non-IT people reading this, if you can't reliably recreate it, and that means 100% of the times I do steps A, B and C, the issue appears, then you can't guarantee any code change will fix it. For a graphic design software like design space, sooo many things can impact what happens on your machine, the image or clip art you are using, the fonts you use, the colors, have you flipped, rotated or resized the item, does it have shadow, blur, what was the line weight... just sooo many variables. The software I support is a graphic design tool and trying to recreate user bugs, even widespread ones, is so difficult and if we don't know exactly what is causing it, we can't fix it. We usually need hundreds of examples with detailed information to identify the pattern of what exactly is causing the issue. I know it's frustrating but I promise the IT team is working hard and not just ignoring issues or making excuses. I do not work for circuit but if their team is anything like mine, they are working hard to fix the issues as soon as they are made aware of them.
Agree! I get the job done- a “successful cut”-but the extra time and effort to get around glitches, restarting, cache clearing, reloading is so frustrating. Many of us have been using DS for years. We could do it in our sleep! Not now…. I feel for newer users!
Is anything getting Runtime errors and Java script errors?? I get them frequently after clicking Make It and have to quit and go back in sometimes several times before it will work.
I am so over Design Space. I’ve been told to delete and reinstall, I’ve made sure there is more than ample space on my MacBook Pro. But the 20-30 second delays, the functionality breakdown and randomness of if my project saved or not is unbearable. However, customer service is still amazing, I feel so badly for them.
I have been using Cricut devices for probably 15 years, recently I’ve wanted to literally throw my computer out the window when trying to use Design Space (and I don’t get frustrated easily) -I am SO GLAD it’s not just me, but think it’s time to go with another cutting system (probably Siser)
My original Expression and SCAL program work to this day. I feel cricut needs to work with Sure Cuts-a-lot to get a strong program. I have never ever had a program update as much as design space. Most of the time it updates and gets worse. I love cricut, but I feel they are spinning their wheels and are just focused on making more machines to make more money.
I've used SCAL for years and even the older version did things that Design Space can't do now. Makes absolutely no sense! I use it almost all the time now, and then export my files to DS to cut. I can't deal with all the DS problems.
Thank you for standing in front of all Cricut users so we don’t’ have to do it ourselves. I have been a Cricut user since the very first machine they made-and I commend Cricut for all they have given us. Who remembers only being able to cut paper and having to buy a million cartridges? I think it’s likely they have just gotten bigger with so many moving parts that keeping profits as their goal is the norm.
The problem is it isn’t obvious because the user thinks it is them. Yes we get to cuts successfully but the mat issue, until your first email, I totally thought it was user error! You spend ages sometimes trying to correct not realizing it’s a bug. It makes it frustrating and when you tell people, get it out of the box and it’s not as easy as promised….! I have to say I love Ashee and think he truly cares, but we definitely need more!
I haven’t reported issues. Maybe I should. So if there team isn’t taking into consideration that a percentage of people aren’t reporting that is a problem too. I get they need to replicate issues to understand what is happening and what needs to be fixed. However, that does indeed sound like an excuse. Other than the freezing and objects missing or tracking when moved the biggest issues I have faced are with print and cut. Cutting has been extremely inconsistent and even 1/16 off can be a huge problem if making stickers for example. I have had one page cut 2/16 off and the next cut an inch and a half off, in consecutive cuts.
Ive only been using Cricut since November, i mainly make stickers for resin projects. Reading all the posts from users in my fb groups about all the glitches going on with ds & cutting & fonts etc has held me back from trying other projects. Im not familiar enough with the product to work out all these fixes to try something new. I would like to do other things but with all the faults with this system, it is holding me back
just yesterday, I was experiencing issues with Design Space. I duplicated a text and it jumped off the canvas. I struggled to move it onto the Canvas. Then the other issue I am still struggling with is updating the Text with a different font. I have to minimize Design Space, maximize the screen again just to see the change.
Sorry, Mr CEO, my completely losing an entire design I’ve worked for hours and hours perfecting is most definitely not a small issue. DS regularly telling me that it can’t load my mats and not being able to cut my project is not a small issue. When I try to open a folder both on my very capable $3,000 PC and my iPhone and it won’t open, is not a small issue! I never know when I open DS if I’ll still have my projects or if I’ll be able to cut my project if it is still there. I came very close to losing hundreds of dollars because my project disappeared in the middle of me cutting an order. Nope…these aren’t small issues. I adore my Cricut machines as well, but I’m trying to start a business and I’m holding back because if I get orders for my products and then DS will not work….then my business fails as soon as it started.
I also love my Cricut ! I originally purchased the 1st Cricut maker when it 1st came out,well one day it stopped working. Called Cricut to try to resolve it. Unfortunately, no matter what we did it did not resolve the matter. And of course the 1 year warranty had expired. One customer representative advised me that I should have purchased it directly from Cricut Huh? When the Cricut maker 3 came out I really hesitated buying it. So ,Tanner you and others on you tube loved the Cricut Maker 3. So I said I’m going for it I love the Cricut I decided to buy it directly from Cricut and I asked if they had an extended warranty. Reply was no. (within a year of my purchase of buying Cricut Maker 3 they offered an extended warranty within a year of me buying my purchasing the Cricut maker. Fast forward, I loved it ! No problems with cutting paper and vinyl. I was very impressed. I never tried the knife blade or the fabric cutter. A couple of weeks ago I pulled out the fabric blade to give it a try. Instantly it made a terrible noise. So I stopped and called Cricut, we tried everything including replacing the fabric blade nothing worked. So I asked for a Supervisor and he said, he would go to upper management and explain the situation as this is a defective machine to no avail nothing was done they offered 50. 00 towards a new machine. Slap in the face. I tried calling Corporate they don’t answer the phone. I left 2 messages and no response and no phone call back. I can’t justify paying for a new machine if they sell defective machines. I am extremely disappointed and frustrated. Bottom line I’m not surprised that we are having software issues as well.
To be very honest, I am really tired of getting Cricut's run arounds. I have been taking a break from crafting because of a family issue. I am now ready to get started again but now I regret EVER buying Cricut. The only good thing about Cricut in my book at this point is that Makers Gonna Learn has utilized them. Does Silhouette have as many issues? I am about to tank my Cricut!