Crosman DPMS SBR Leaking Magazine Fix

Подписаться 7 тыс.

Просмотров 28 тыс.

50% 1

UPDATE 2: The two replacement magazines that were supplied by Gravel Agency through Crosman, work perfectly. I have had zero issues, and great customer service.
UPDATE: Crosman replied to a recent email I sent them regarding the magazine issues. Crosman arranged to have two new magazines sent out to replace these two defective magazines. This is greatly appreciated. It will allow me to dive deeper on the issue at some point on the old mags and see if we can’t find a fix for you tinkerers out there.
ORIGINAL: I've owned 3 Crosman DPMS SBR magazines, they all leaked. After some research, a friend found the easy fix, and it works! Once the magazine cools down, and you fire it a couple times, the leak disappears. I tested this on two separate magazines and it worked like a charm.
Watch the video, subscribe, and enjoy!
Subscribe Please
Where do I get my music from? www.epidemicso...
US RESIDENTS ONLY
bit.ly/3qXX7QA - Benjamin Cayden
bit.ly/2PDtlUI - Umarex Gauntlet
bit.ly/3fMiRgw - Umarex Cowboy
bit.ly/3fNBhgX - Umarex Peacemaker
bit.ly/3mmk2Vi - Crosman DMPS
bit.ly/2Q2syMS - Gamo Swarm
bit.ly/3sVDA5b - Diana Stormrider (full power USA)
bit.ly/3dFJDVd - Umarex Glock Gen4

Опубликовано:

13 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 75

@jonnydangerously6597 3 года назад

I just want to say THANK YOU SO MUCH!!! I just got the Crosman Bushmaster MPW 2 weeks ago and yesterday I put in fresh cartridges and used maybe 1 mag. This morning when I went to shoot they were empty? I thought that was strange so I took them out and grabbed 2 more, as I tightened the first one all the air came shooting out the other side at full blast!! I tried 4 more cartridges before getting so frustrated that I contacted the online seller I bought this from brand new,... I then found your video and I said what the hell, I'll try it so I took it apart and heated up until it was warm and tried to insert a cartridge but NO JOY,..it blew out again but not quite as fast so I took it out grabbed the heat gun and got it nice and warm like it was sitting in the sun on a 90 degree day for a few hours. I then took 2 carts and added a drop of silicone oil on the tip of each and placed them both in tightening each evenly until they were right before the point of puncture and then I tightened the first one and YES the air went in with no leak and same with the other one and I'm shooting great again,.. so thank you, this method does work under these conditions I can't comment on other type leaks but this def. worked, YOU ROCK!!

@northballistics 3 года назад

Officially the longest comment we’ve got so far, but I’m super glad this was able to fix your problem. If it does keep happening contact Crosman and they will replace.

@bogeyman. 3 года назад

Had the same problem,,,just put the empty mag on the radiator for a while ... worked for me

@tigerbeforyou181 4 года назад

At 50 bucks a copy they should replace them!

@northballistics 4 года назад

And they did, received two new ones the other day. Posts of them on my Facebook, Instagram, and Twitter.

@Livemusic1800 3 года назад

@@northballistics whats the policy on returning them if they come defective? I have one that leKs as well.

@northballistics 3 года назад

@@Livemusic1800 hey Mikee, contact Crosman support, their customer service is very good. They replaced two of mine after shooting this video. Now I have 4, two leaking two, not leaking.

@bigjsoutdoorsairguns9007 4 года назад

Great video man! I recently bought one of these & the mag only charged on the left side. Crosman took care of it right away & sent me another one. I still have the old one & would like to try & fix it. Any idea's on what the problem is with them? Thanks for your time.

@northballistics 4 года назад

It looks like there’s some valve sticking issues. Not sure exactly what’s causing it, but the heat seems to loosen it up and releases the stuck valve temporarily. Crosman also took care of me finally, and I’m happy.

@lonewolftech 2 месяца назад

They’re junk that’s the issue. Not worth the money spent!

@stormdrone1313 2 года назад

Hahaha!!! put it out in the sun, works fine now!! Thanks buddy!!!

@northballistics 2 года назад

That works too, as long as it gets heat up enough to expand and contract.

@granttiftickjian9159 Год назад

When you put the co2 in hold it upside does with the co2 bottom facing you

@northballistics Год назад

I am not sure what you are asking. I am sorry.

@requanbattle3202 6 месяцев назад

Basically installing it upside down. Hold the c02 while screwing it

@hobofoshitsho8999 6 месяцев назад

Right but what does that accomplish? All the mind readers work for the government now or died because of working there. Anyway, it makes sense that if you're going to blurt out a random action to a stranger, you should include some additional details. For example... Why? And maybe the type of result one should expect when doing the thing. At the very least, toss out a "#doubledogdareya" so we know you're just a troll. Then we can have a chuckle together and carry on with the rest of the completely meaningless shit were all so busy doing. Like me.... I don't have time to go and watch videos about toys, read the comments from probably years ago and respond to complete strangers with unnecessarily lengthy and (I'm sure we can all agree...) girthy comments that accomplish nothing for me or the poor bastards that make the mistake of getting sucked into the meandering labyrinth that is the messy mind of HoboFoshitsho. I'd like to thank you all for coming out. Make sure you tip the bartender if you're drinking. His life will be over soon. He's getting married.

@stefandeangelis7402 4 года назад

I'm having the same issue (leaking from top seal) basically out of the box.. Did heating the mag solve the problem and for how long?

@northballistics 4 года назад

It actually went back to leaking after about a week. I'm going to try it again and do a follow up video shortly. Make sure you take some silicone oil and lube up the seal a bit, that will make sure to keep it from drying out.

@joedeertae4126 3 года назад

Take top screw out, remove seal, turn pin clockwise w needle nose or flat tip pliers until leaking air stops. May have to turn clockwise ~10 times.

@chrisclarke2461 3 года назад

@@joedeertae4126 does that completely fix the prob?

@joedeertae4126 3 года назад

@@chrisclarke2461 sure did on mine

@joedeertae4126 3 года назад

@@chrisclarke2461 went thru 4 CO2 to keep trying to get pin set just right, but working fine now.

@aldoseba Год назад

Hello, I have a broken part of my mag, it's like a gasket that goes around the o ring where the gas exits towards the bb and the recoil system, someone knows that part # or where to find it?

@northballistics Год назад

You’ll have to call Crosman customer service they’re very good.

@aldoseba Год назад

I don't want to buy another mag.

@northballistics Год назад

No one said anything about that, I said call their customer service.

@bogeyman. 4 года назад

had the same problem ....put magazine on radiator for a while and haypresto problem solved

@northballistics 3 года назад

Yeah for some it’s the trick. The sun works too if it’s hot out. It seems to get stuck again. Crosman replaced my magazines, I would contact them if you can’t solve it.

@mikedevita5558 8 месяцев назад

Any remedy to valve chamber nipples worn out?

@northballistics 8 месяцев назад

Buy new mags?

@hobofoshitsho8999 6 месяцев назад

Try pasties.

@hobofoshitsho8999 6 месяцев назад

If you don't get it, that could take a minute.

@nedrickjones5114 3 года назад

My mp40 co2 is leaking as well, could any of you help me please?

@northballistics 3 года назад

Do you know where it’s leaking from? The seal at the tip of the co2 cartridge, or elsewhere? Do you store it with co2 in it? The seals could be compressed. Make sure you use pelgun or silicone on the seals to keep them fresh.

@mrfixitAZ 2 года назад

Might have been helpful if you could hear the guy. Zooming in on the repair itself would have also been helpful

@northballistics 2 года назад

Turn up the volume, no one else seemed to have a problem with it. It’s not rocket science, it’s heating up a magazine. ;)

@bradhartsell1410 7 месяцев назад

I can't even get the first two canister

@northballistics 7 месяцев назад

@bradhartsell1410 7 месяцев назад

@@northballistics I got it, thank you for the ?

@drewmorales14 10 месяцев назад

😮don't be so dumb there is a flat head screw on the side you have to flush that valve by unscrewing it then loading a full co2 cart n let it flsh our problem solved

@ST54VAG 11 месяцев назад

What is that scope that your rocking

@northballistics 11 месяцев назад

It’s a centre point that came with it.

@Edgar-ij5eu 4 года назад

Hi! Can you help me to buy an magazine extra to Dpms Sbr? I am from Brazil.

@northballistics 4 года назад

I’m not exactly sure who ships to Brazil. I would email Crosman directly and ask. They want to help people buy their products.

@Edgar-ij5eu 4 года назад

@@northballistics Can you send me the email Crosman?

@northballistics 4 года назад

tmcguire@crosman.com - international inquiry

@stanleychamallas2331 2 года назад

Easy fix, silicone grease around the perimeter head of the CO2 and problem solved!

@northballistics 2 года назад

No, that’s not the location of the leak. If that’s your issue, jus replace the green seals. This is for an internal leak.

@stanleychamallas2331 2 года назад

@@northballistics oh ok good luck.

@northballistics 2 года назад

@@stanleychamallas2331 thanks, all issues resolved by following the video. :)

@EricDrenckhahn Год назад

@@northballistics Where can I get the green seals?

@northballistics Год назад

Contact Crosman

@vintageguitarz1 3 года назад

Can't hear a damn thing you're saying, did you even listen to your own recording before uploading?? Get a Lapel microphone! The Fix has nothing to do with heating anything, the valve on top need to be TIGHTENED Clockwise!

@northballistics 3 года назад

Really old video, and thanks for your input. Your leak you’re talking about is not the leak experienced in the video or with my rifle. That valve is completely fine on all my mags. The leak is inside the unit between the two chambers for 1 and 2 co2, gets stuck open.

@lonewolftech 2 месяца назад

Hey snowflake I don’t use lapel microphones either and am not spending the cash on one. If you want him to use a microphone then send one to him otherwise stfu and go elsewhere.

@lonewolftech 2 месяца назад

Hey snowflake I don’t use lapel microphones either and am not spending the cash on one. If you want him to use a microphone then send one to him otherwise stfu and go elsewhere. And that tightening the valve shit don’t work…

@pascalpoisson7069 4 года назад

Exchange your mag, for a new one....

@northballistics 4 года назад

Well I did, and that one leaked too. I have two in transit from Crosman.

@skepticaldopefeind Год назад

you really put a gun and a camera that has nothing to do with the video, i this video just to show off the bullshit rusting items you think are prized?

@northballistics Год назад

What the hell? LOL. Are you drinking and commenting again earl?

@lonewolftech 2 месяца назад

Ignorant comment.