Crossfire Nano RX - How To Install on the GEPRC Thinking P16

Подписаться 234 тыс.

Просмотров 2,5 тыс.

50% 1

In case you purchased your Thinking P16 with a different receiver and would like to install Crossfire, here's quick video showing the process.
Thinking P16 Full Review - • GEPRC Thinking P16 - T...
GepRC Thinking P16 - geprc.com/prod...
Tbs Fpvcycle Minimortal T Antenna - www.helidirect... antenna
Smoke Stopper - www.amazon.com...
Geprc downloads geprc.com/down...
------------
Thanks to Kai at Lone Star UAV for the flight footage, and being a generally good guy (although, he is sometimes a big bully). / lonestaruav
-----------
#FPV #GepRC #ReadySetDrone
The music in this video is from Epidemic Sound.
bit.ly/RSD_Epid...
If you want inexpensive, hassle-free music that sounds great for all of your social media channels, you should definitely check out Epidemic Sound.
Join this channel to get access to perks:
/ @readysetdrone
Kelly Shores is a FAA Part 107 certified drone pilot. He enjoys flying toy drones, camera drones, RC airplanes, and FPV quads. When he's not flying drones, Kelly enjoys photography, biking, travel and hanging out with his family!

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@chrishope82666 2 года назад

Almost there just need to set up in beta flight now. Thanks You two.

@SunriseWaterMedia 2 года назад

You joined the Thinking P16 club, Chris? It's what I've been missing on the digital side of FPV. Great for indoors with a 2s. Just make sure Kelly doesn't try to eat it! 😜

@BigAlFPV17 2 года назад

Excellent video Kris!!

@readysetdrone 2 года назад

Thanks very much, Alan 👊🌞

@CarolinaAirshots 2 года назад

Looks easy , for you lol , guess I should be practicing soldering as much as the sim

@readysetdrone 2 года назад

Lol Jeff, I edited this video heavily! I'm a slow solderer. 😂 Soldering practice definitely helps. I got myself a diatone mamba solder practice board, to learn on. If you need to hone your skills, that's a good way to do it. Thanks for watching! 👊 - Kris 🌞

@dougcooper4917 2 года назад

Excellent Training Video! Thank You.

@SunriseWaterMedia 2 года назад

Thanks for watching, Doug. 🌞👊 This was a fun one to make and I learned a bunch of things along the way.

@JSKenterprise 2 года назад

Kool, thanks for sharing.

@readysetdrone 2 года назад

Thanks, Leonard. 👊🌞

@chrismillersrcfamily 2 года назад

Awesome stuff 👍🏼👍🏼

@readysetdrone 2 года назад

Thanks, Chris. 🌞👊

@Prettycoolguy-wr1er Год назад

Can you make a vid of how to do this but it’s on the tinygo

@readysetdrone Год назад

I believe the flight controller is the same, assuming you have purchased the tiny go within the last couple of months. So the general process would be exactly the same. If you have the older flight controller, simply locate the same labels on that FC, and follow along. I believe I gave away that drone to a subscriber, so I no longer have it. The only thing you'll have to figure out is the best way to physically position it on your Tiny Go. I hope it all goes well.

@Prettycoolguy-wr1er Год назад

@@readysetdrone thanks dude

@upnorthFPVandEUC 2 года назад

Hi I would like to do this with elrs betafpv lite receiver.. can you show me how to wire it? oh wait.. i see it now thanks!! 11

@readysetdrone 2 года назад

Thanks for watching.

@OldTimePredator 4 месяца назад

Need your help. I flashed the firmware. Where can i find the right config for the fc with crsf?

@readysetdrone 4 месяца назад

I've added a link to the description where geprc provides downloads. That might be what you're looking for. I'll try adding it below this comment, but RU-vid might delete it.

@readysetdrone 4 месяца назад

Try this link geprc.com/downloads/thinking-p16/

@OldTimePredator 4 месяца назад

@@readysetdrone thank you very much. I tried it with this download but can you send me your file with your configurations?

@readysetdrone 4 месяца назад

I'm traveling and won't be able to access that drone for a few weeks, but as I recall, I didn't change any of the settings other than what you saw on screen in this video. Also, I haven't done any beta flight updates, so yours might have a newer version.