Crown XLI 800 review 

Ha ha.... 😂🤣😂🤣, i call mine an "oinky" 🐷🐷🐷🐷 as it can be a bit of a "pig" sometimes.....

@MichaelHarlamert Hay Michael.... you dont have to "switch" between 4 & 8 ohms..... these figures are what the amp loading is able to provide power to safely... So, connect a pair of 4 ohm speakers, or a pair of 8's and it just will work... Dont connect 1 4 ohm and 1 8 ohm on the other channel.... its not good.... Also, dont connect 2 ohm or bigger then 8 ohm if possible (max really is 12 ohm, and check temperatures).... Oh.... and a pair of 6 ohm speakers are also fine 🙂..... dont go below 4 ohm (like 2x6 ohm per channer wired in series giving a 3 ohm load.... your amp will blow ☹️). Hope that helps, read instructions and google forums if unsure about anything 👍🏻🙂❤️ (1 love)...

@@mohammedisaa9952 so using 6 ohm speakers will give you more power to your speakers am I correct

......."Wired in PARALLEL to get a 3 ohm load"..... Sorry... typo.... parrallel NOT series !!!!

@truckman7123 .... hi 👋🏼 Yep, but you would have no tone control, only volume..... you could put an "equaliser" between the cd player and the amp to help with adding or subtracting certain tones..... but watch the clipping lights on the amp, too high with the boost, and it will begin to distort, unless your equaliser has a variable output control 🙂👍🏻... Hope that helps buddy 🙂👍🏻

I did this, using the RCA and then the XLRs from my DAC. FAC had fized output level, you couldn't adjust it. On several speakers that I tried with it I found it way too loud too fast at just past the 9 o'clock position on the channel gain knobs.

Why are you telling this man to waste his money? Those speakers are not worth fixing maybe if he had a pair but this way no

@chrisschuele4743 I havent seen the video yet, but im sure we can "freeze" the picture when he shows it..... Rca outputs of device like a pre amp, or a cd player etc to the rca connectors on back of amp, or xlr pro gear to inputs marked xlr on amp, then speakers using NLR2 speakon connectors or banana plugs to the black and red terminals on amp to speakers...... the amp will come with a manual, or you can watch some vids here to help you 😉 👍🏻..... I would also suggest using a "graphic equaliser between source equipement and amplifier..... just makes the sound better, but watch the clipping lights on the amplifier........ you dont want them flashing as the sound will distort... ☹️.. Hope that helps you bro 🙂👍🏻

@chrisschuele4743 Oh.... i see now... hes using a home cinema amp, so its connectwd from the Onkyo's sub out using rca plugs, to the amps rca input.... DONT FORGET TO SWITCH AMP TO 0.775V input.... NOT THE 1.4V imput (as the amp will be too quiet.... 👍🏻🙂

I call mine an "Oinky" 🐷 but i love it really.... 😂🤣😂🤣😂🤣👍🏻👍🏻👍🏻👍🏻👍🏻