Cura Slicer V5.0 Profiles - Fine Detail to Hyper Fast

Подписаться 298 тыс.

Просмотров 188 тыс.

50% 1

Chuck just released a set of Cura Slicer Version 5.0 Profiles. He explains them here and also introduces a new Hyper Fast Profile that is really fast. The same sample print went from 2 hrs with excellent detail down to 22 minutes in Hyper Fast mode for a quick functional print.
Learn all about them on this episode of Filament Friday.
** $3 - Ender Style Cura Profiles Download Links: **
Latest V5.x Profiles: rb.gy/5k981c
TPU Profiles: shorturl.at/V08bk
PETG Profiles: shorturl.at/RLEfI
(Free to Patreon Members)
Filament Friday E-Leveler 2 for Bed Leveling:
amzn.to/3Yz3Vc2
Filament Friday Tool Kit:
amzn.to/2MOR00X
Filament Friday E-Leveler 2 for Bed Leveling:
amzn.to/3Yz3Vc2
Popular Prints:
CHEP Cube Test Print: social.thangs....
CHEP PTFE Cutter Tool: social.thangs....
CHEP Pawn: social.thangs....
**** Support the Channel *****************
Financial Support through Patreon:
/ elproducts
***** Ender 2 Pro (Shown in the video) *****
Creality Official Reseller Comgrow: bit.ly/3tnLuHn
Amazon: amzn.to/3sLuSaW
***** Creality Ender 3 Pro: *****
Creality Official Reseller Comgrow: bit.ly/2SIMa86
Bundle From MatterHackers: bit.ly/2FuKFpu
Note:
As an Amazon Associate, I earn from qualifying purchases.
****************************************************
Filament Friday Sticker:
Send Self Addressed Stamped Envelope to:
Electronic Products
PO Box 251
Milford, MI 48381
****************************************************
Chuck's Arduino Book:
amzn.to/3tA31JP
Intro animation by Pablo Licari based on Filament Friday Logo by Brian Carter.
*************** Free Filament Friday Sticker **************
Send Self Addressed Stamped Envelope to:
Electronic Products
P.O.Box 251
Milford, MI 48381
**********************************************************

Опубликовано:

21 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 905

@daliasprints9798 2 года назад

Would you consider spending some time in your videos on profiles explaining which settings actually made the difference to speed, and what bottlenecks you hit against going faster? I feel like a lot of folks see this all as just black boxes rather than knowable principles they can use and build on.

@bleach_drink_me Год назад

Would like to see this as well. From my own experience hotend flow rate and cooling becomes the limiting factors at high speeds.

@shufflex704 2 года назад

70 next birthday and have just got my first ever printer, Ender 3 Pro. I am in the middle of printing the sample dog and I am absolutely blown away by it. The print has just got past the dogs tail, me and my good lady are opened mouthed watching it. The technology is amazing, What next? you can't help but ask oneself. Even to a complete novice your video's make for good viewing @CHEP so I thank you for that, I have subscribed and will watch some more over the next few days. Keep up the great work.

@rickpatman628 2 года назад

Thank you Since I found your channel I have learnt so much about 3D printing. I love how you share your experiences with us

@threedfreek1 Год назад

I just printed a church in white for my wife... I accidently printed with this profile and I have absolutely no regrets... it came out awesome... (it's not perfect quality but my wife loves it) I put lights in the church so she could make it glow. Thanks CHEP!!! I learn so much from your channel!

@ricardordz7538 2 года назад

Been using your xtrafast profile for big "functional" cosplay parts that are going to be post processed anyways and it is amazing, i can't wait to try this New profiles

@baljazz 2 года назад

Same. Able to print my 1:12 scale diorama hole lot faster. Gonna try this one out now.

@walkerbuck5834 2 года назад

Oh yeah for sure I'm using that profile for mine aswell helps cut times in half so quickly super nice

@AikoNyuMichaelisg00gle_123 2 года назад

❤️

@MW2pawner123 2 года назад

I’ve been doing the same!! I cuz my times from 24 hours to about 12-13 hours

@Kennyy212 2 года назад

Been using the ExtraFast Profile for about 10 prints now. Changes some retraction distance and speed but that baby is rolling. Pretty much my go to now, thank you.

@mastercylinder2008 Год назад

Not only have these profiles saved me countless hours, the extruder arm on my Ender 3v2 just broke. When I bought it I printed a spare from somewhere, and now my printer is up and running again. I don't know where the STL for the arm came from, but it says CHEP underneath. Have a coffee (or beer) on me. Cheers.

@housinit 2 года назад

Awesome Chuck, thank you! Always love your profiles and use them on my CR-10 v1 all the time with minor if any tweaks. They print great! Can't wait to try these ones out, including the Hyper-fast one...really interested in seeing how my printer handles it. Thanks again for all the hard work and time you put in for the community!!!

@StonerGamingParadise Год назад

How do you download them? The links take me to stl files

@CuddelzTV 3 месяца назад

change title its now clickbait since it is no longer free.

@toddltomlinson 2 года назад

Wow absolutely amazing results with the Extra Fast profile. I make and sell cookie stamps. Using my stock Ender 3 V2 profile it took 4 hours to print a cookie stamp. Using the Extra Fast profile 1 hour and 4 minutes and the quality is great for what I need it to be for these stamps. Absolutely astounded. This saves me having to expand my print farm. Thank you Chep!

@FilamentFriday 2 года назад

Glad to help

@HughD 2 года назад

Thanks, Chuck. Are you going to change your TPU profile, too?

@volvtech7773 2 года назад

I'm new to this whole 3d printing realm. Your videos were the first I found for help here and there. Man I love your channel 👌 you do an amazing job talking about and describing everything for someone new to this

@FilamentFriday 2 года назад

Glad to help.

@FilamentFriday 2 года назад

FYI: You can use these profiles with any printer. Just start with a Creality machine profile in Cura to see the profiles. Pick a machine profile that matches the size of your printer. They are designed for PLA and 0.4 nozzle on bowden setup. Here is how to load them: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EJD1hCJpM_w.html You can increase the temp for PETG and reduce retraction for direct drive.

@rhysthomas1915 2 года назад

Hi Chuck. I am quite new to this - what would you suggest reducing the retraction to for PETG? Thanks

@FilamentFriday 2 года назад

Don’t change retraction just temp for PETG. Try 225°C

@rhysthomas1915 2 года назад

@@FilamentFriday sorry, just to clarify I have the S1 pro (direct drive) I have been watching lots of your videos this evening so will be taking them all on board and doing lots of test prints. Thanks again

@russcalder 2 года назад

Before I waste any filament, what issues may come up if I use this on a Direct drive (E3 S1) and are they easy to fix? Thanks @CHEP

@girenloland 2 года назад

@@rhysthomas1915 LOWER THE RETRACTION FOR GOD SAKE on the S1. This profile is for bowden

@Mattbe72 2 года назад

Was waiting those ones heavily 🙏 Thank you. Your profiles are so awesome and excellent base to start building our own for other machines. Great work!

@johnathangalvin6616 Год назад

Hi is there any fast cura profiles for the ender 3 s1 printer range cause of it's a direct drive extruder do we need to change the retraction numbers on cura or leave as is? Thanks😊

@mcorrade 2 года назад

Chuck I tested both the .28 and .20 from the patreon site and both worked great. I do mostly functional printing and these profiles have changed everting. I can't tell you how much faster and even better my prints are now. I've said it before and I'll say it again....U DA MAN!!!

@dankron_ 2 года назад

Hey Chep, do you have any profiles for TPU?

@FilamentFriday 2 года назад

It’s coming next.

@chrisshurtz5541 2 года назад

WOW!!!! After tinkering for a couple months with my Ender 3 S1 and getting "okay-ish" prints - your Good Profile is incredible! I'm using MRISCOC Professional Firmware, and only changed Retraction Distance to 3mm, Bed Temp to 65 (its colder in my basement), and PLA+ Temp to 210. I honestly didn't think my prints would ever look this nice. Thank you Thank you!!!!

@FilamentFriday 2 года назад

You’re welcome.

@karlosp75 2 года назад

Brilliant video as always. These profiles are fantastic and work great thank you. I am changing to a 0.6 nozzle on my E3 V2, when will you be doing some 0.6 profiles?

@FilamentFriday 2 года назад

Working on them.

@karlosp75 2 года назад

@@FilamentFriday thank you sir

@firefreaksuk 2 года назад

@@FilamentFriday Yes please Sir, can't wait for 0.6 nozzle profile (Best). Can I also say great work, your profiles have taken my prints to the next level. Amazing work Sir.

@H31MU7 2 года назад

@@FilamentFriday you just got a new sub then, love this 0.6 nozzle

@BobLewen Год назад

Just a quickie, Chuck..... I downloaded your best profile for my Ender2 Pro, using Cura 5.3. The "best" took 1hr 38mins and is virtually perfect!! Thank you!!

@fvargason1193 5 месяцев назад

any new profiles for 5.7?

@Codyprince07 2 года назад

Thanks Chuck. I'm amazed at the speed I can get with these and not loose quality. Love your channel, very helpful.

@mcorrade 2 года назад

So I found that if I increased the hot end temp the hyper fast profile prints come out way better to the point of almost no difference form the regular fast print profile.

@reecephillips3090 2 года назад

too what temp?

@mcorrade 2 года назад

@@reecephillips3090 220c

@mikek2824 2 года назад

Thank you for releasing this I have been using your profiles for a few weeks And I love them they print so nice. Now I'll have to try 5.0

@whocares1175 8 месяцев назад

I cant seem to import the profile, even when following the steps provided, I keep getting import failed :(

@leeavsart2960 2 года назад

You are a genius! I printed a part that was supposed to be 20 hours in only 9 hours using hyper fast. Thanks!!

@Clerk-d9j 3 месяца назад

it's not letting me download the file

@herberthenri 2 года назад

Hey @CHEP how about the supports? Are they also already configured? btw thanks for the 5.0 profiles, i'll be testing them soon!! Another question, do you think they may work for ABS as well? Or even TPU? thanks again! :D

@AndrewAHayes 2 года назад

Th last fast profile completeley cocked my Cura up, it changed the bed to Ender V2 size and support density started changing itself to 100% and I cant print more than 2 multiples of parts as it then throws the parts off the build area, I ended up having to back up my computer and re- install LInux, I tried removing everything associated with Cura including going into the user folder but that would not solve the issue after a reinstall of Cura

@user-yk1cw8im4h 2 года назад

thats why you dont trust random profiles on the internet.

@AndrewAHayes 2 года назад

@@user-yk1cw8im4h You live and you learn! next time I will install to one of the junk PC's I have or create a different Cura profile, I did ask in the preview post to make a list of changed settings but no reply

@DjDoomtrain Год назад

because of you i have gone from total noob to mediocre 3d printer in this month. you sir are a legend

@MeGrimlock511 2 года назад

Hi Chuck, are you planning on releasing profiles for 0.6 nozzles? It'll be interesting to see if you can get the hyper fast to the next level :)

@FilamentFriday 2 года назад

Yes

@reinux 2 года назад

@@FilamentFriday Hate to nag, but very much looking forward to this :D

@petercallison5765 2 года назад

0.6 is the way to go!

@FilamentFriday 2 года назад

About 2 more weeks.

@michelealbanese5595 2 года назад

@@FilamentFriday thanks!🙂

@brian_pilling 2 года назад

I have watched so many of your videos, but I rarely comment. Thank you for these, you are a major help to the community. Your videos are very helpful and your Filament Friday Toolkits do a great job!!!

@FilamentFriday 2 года назад

Thank You

@ljcooil87 5 месяцев назад

Maybe I'm just dumb but it keeps failing to add the profile to my cura.

@nzwarriorsmen 5 месяцев назад

i have the same issues as you.

@TrippyOriginals 5 месяцев назад

@@nzwarriorsmen click cura confguration under preferences, click profiles, click import, find the one that you downloaded and add it. then you can click through on the left and pick which ones you want to use

@GeneDascher 2 года назад

I am currently using the Fast and HyperFast profiles for printing the parts for the Lowrider v3 CNC and I am pretty amazed at how good the finished product looks and how solid the pieces feel for the amount of time it takes to print them. Thanks for sharing all your hard work with the rest of the world, Chuck!

@tonyjarvis4970 10 месяцев назад

The Extra Fast profile has the correct name label but it installs as the 0.2 Good profile. It could of course be that I am doing something wrong.

@anthonygsimon 10 месяцев назад

I'm getting the same thing.

@romualdrodrigolobosmunoz6881 10 месяцев назад

Same here

@axe7980 9 месяцев назад

Me also.

@michellafleur1939 Год назад

I had kind of problem with stringing using the profile. I decided to reload the firmware for a E3 mini v1.2. Now your settings work extremely fine. thank you for what you do to the 3d community.

@wojbar9238 9 месяцев назад

on thangs profile 0.2 and 0.28 are same

@landonschropp665 9 месяцев назад

@FilamentFriday Could you please take a look at the 0.28 download? I'm running into the same thing. Thanks for the great profiles!

@LarryKreissler 7 месяцев назад

I found the same thing!!

@timstratton9 7 месяцев назад

same - hope it is updated soon, these profiles are the best out there. @FilamentFriday

@Doughy_in_the_Middle 2 года назад

I had basically shelved my printer from August last year until just a couple months ago. After disassembling EVERYTHING down to the left vertical and horizontal and resquaring, I found out the center support bar was bowed, FINALLY what the BLTouch was seeing! That complete, I now had to look at Cura. I was still running 4.13 and 5.0 was JUST about to come out. Once it did, I knew you wouldn't be far behind with a new version, but I at least compared the default "standard" profile, your last 4.1 profile, your FAST profiles, and my old "hybrid" of yours and my own adjustments. It was good to hear you saying "I modified it with *some* of his settings". To do this, I have a database (from my former life) that imports EVERYTHING in the "quality settings" folders as well as any special ones I don't want to load into Cura, but just want to compare. it then lets me pick and choose from list boxes which setting I want to import into a new profile, and then export it. I've been printing tabletop miniatures for the last couple days with a .12 profile and last night I used your "Best" profile as the basis, combining it with the settings of 3D Printing General, and the support settings from 3D Printerly (which just happen to be a blend of 3DPG and your profiles and their own tweaks). The minis came out great. Now...I have a host of tree supports to remove. Thank you for all that you do!

@mordantly 2 года назад

Why not use a free google drive? It's annoying to have to join a website and get my email spammed to try out your "free" profile for prototyping a mechanical part.

@FilamentFriday 2 года назад

Or I could just skip all the work and not share them at all.

@mordantly 2 года назад

@@FilamentFriday That domain is paying you then? You said "free to download" so I asked why you use that registration required domain. If that is what is your idea of sharing ideas with others, then come up with a US dollar price and tell us said price.

@mordantly 2 года назад

@Jason Gunn how better to support someone's effort then to buy their product? You highlight this bitching but won't state a price to buy these "free" profiles? Why not?

@AdamonfireXMX 2 года назад

@@FilamentFriday No offense dude but you sound like a 15 yr old saying that. This person makes a valid point and you instantly go all "im taking my ball and going home". You know more about printers then i ever will but making your fans go through extra steps for shits and giggles to get your profile is dumb. You also not taking accurate and correct feedback is also dumb. No hate bud, it just sucks to see that you are "that" kind of guy.

@AdamonfireXMX 2 года назад

@Jason Gunn Dont be a bootlicker man. Its not a good look.

@olhakesta 2 года назад

Dear Chuck: If I hadn't tried it, I wouldn't have believed that it would be possible to get very good quality prints with your extrafast profile! Fantastic: Prints that would take 5 hours in less than 2. I haven't tried hyperfast yet, but I have no doubts about its efficiency and speed. My printer is an "old" but very functional and reliable ENDER3 and the profile works wonderfully. Thank you very much for your excellent work that I hope I can continue to learn and enjoy!

@kingsidorak 2 года назад

Chep. Plese stop using these model downloads, and just upload the profiles. You are exporting your entire Cura scene, and I am now using your Ender 2 Pro profile on two of my Ender 3s which both have Sprite Pros, and not stock bowden tube setups. I also could not save the profile as a new profile until I changed things, which means I also have to take extra steps to make sure I have backups of these profiles when I modify them

@DKFX1 2 года назад

If you're using the Sprite Pro, also make sure to change retraction distance from 6 mm to 0.8 mm.

@kingsidorak 2 года назад

@@DKFX1 I'm using .5mm retraction

@rb30e Год назад

Thanks, I've had my printer and Ender 3 S1 Pro a week, Your videos are a big help to keep me motivated when i have a failure. I look forward to trying your settings. Thanks again from Australia.

@rb30e Год назад

Also read the comments and found the advice to set retraction to 1 - 2 mm for my printer. Thanks again.

@Vash612584 11 месяцев назад

"free" not so "free" when you have to be a bronze member of his site to access his "free" profiles...

@FilamentFriday 11 месяцев назад

Not true. The links in description are to the free profiles. Bronze is for expanded library of profiles and more plus it supports my work to offer the videos and the truly free profiles.

@andyshap 2 года назад

Woo hoo!! I've been waiting for these to be released!

@fredydefcon1 Год назад

hey everyone, hey Chep, I've been using these profiles with Cura 5.2.1 with only minor tweaks to match my printer and it's been working amazingly, great job Chep...I'm looking forward to more news, keep doing what you've been doing until now and better.

@lazyhydroponicsandstuff3682 Год назад

Just bought a Neptune 3 and its on the way. Learning a lot will your profiles work for a Neptune 3 do I need to change anything?

@funx24X7 2 года назад

This really brings out the "rapid" in rapid prototyping, these profiles sound perfect for quick iterations during development.

@egolgeli 2 года назад

That's awesome. Thank you for updating and sharing your awesome Cura profiles, which took my printing experience to another level. Also, I got pretty much excited while watching you, had a feeling that I was watching an impressive product launch video of Apple or smth. :D

@hon3ygr4m 2 года назад

These profiles are awesome!!! I had my profiles honed in, and then cura 5.0 came out and I started having problems. These profiles were on point and definitely gives me a good reference point to compare with my profiles. Thanks Chuck!!!

@petercallison5765 2 года назад

Really interested in profiles for 0.6 nozzles. Any tips to convert yours from 0.4 to 0.6? Same for Volcano nozzles.

@DKFX1 2 года назад

Great job on getting a new video out so soon. Nice! And thank you for the shout-out. Happy you could use some of my Cura setting:) I tried your Hyper-fast profile, and it works flawlessly, its only a couple minutes slower than the profile I sent you, but I notice a quality improvement. Regarding your "goodprofile" on 0.2mm it's not something I'm going to use since it's only 5%-10% faster than the "standard" profile you get on Cura and quality is same or slightly worse. I have developed a Good quality 0.2mm profile off your "Xtrafast" 0.28mm profile and it's only about 30% slower than your hyperfast profile, 8% slower than your Xtrafast. Have a good one.

@Hanzi2u 2 года назад

thank you very much Chep for these fantastic profiles ,i tried from 0.20 to .32 and it still great impressively !

@Sapherys Год назад

Thank you very much for the profiles, I spend so much time using yours than testing myself each configuration. Really thanks for sharing

@jovanienazaire1362 2 года назад

Thanks for this. Ive been printing for 2 years now and your profiles helped me a lot. Most of my personalized profiles are based on yours. Now this one will be my next goto profile for sure!!

@jamiebmorton 2 года назад

Are these profiles printer specific or will they work for say a Creality CR6 MAX? Great content as always!

@Tisane28 2 года назад

Download the 0.20 model into Cura 5.0 and it changes my printer to an Ender 2 Pro, then as i change my printer back to Ender 3 Pro the 0.20 profile dissapears. I take it these profiles are specifically designed for an Ender 2 Pro? And if they are will there be any Ender 3 Pro prrofiles incoming?

@smoke.007 2 года назад

Thanks for your time and effort you put into releasing these. I look forward to downloading and playing with the profiles

@briansmith7046 2 года назад

Thanks Chep, really appreciate all the hard work you put in helping out the community

@zolar7a 2 года назад

Thanks Chuck, great work with these fast profiles.

@jjsauer7125 2 года назад

Printed 0.32 HYPERFAST PETG with my ender 3 v1 with no issues. YOU ROCK!!!!

@quarkonia 2 года назад

Profiles look great, thank you. The hyper profile came just at the right time for a few large functional pieces that dont need to be pretty, and its worked a treat on them, supports on the Hyper profile also break away really clean.

@markferrick10 2 года назад

Clearly I am missing something. How do you import the settings from the 3mf file. when I load it into cura 5, nothing changes. Can you help?

@FilamentFriday 2 года назад

Go into settings and you'll find the setting "Default behaviour when opening a project file", select "always ask" in the drop down.

@markferrick10 2 года назад

@@FilamentFriday I have that set. stderr.log raises errors when using some ender2 files, I have an ender 3. I just opened an issue in the cura community ( not yet bug, because I am sure I am causing it some how. ) Thanks for the response and the work you do for the community. EDIT: Help on FB suggested it may be the Start-up Optimizer causing issues, and when I disabled it, I was able to import the 3mf as a project. So, is this a Start-up Optimizer issue, Cura importer issue, or user error?

@bonose12 2 года назад

Appreciate these profiles big time. Are all these .4 nozzles? Have you done any .6 or .8 nozzle stuff? Great work Chuck. One of my favorite channels.

@FilamentFriday 2 года назад

I’m working on larger diameter profiles

@EGM1775 2 года назад

The master, the legend at it again 👍

@janderson9806 2 года назад

glad you sorted the .28 profile I was getting the gaps as well and was stumped and thought it was me

@stevenmurray3398 Год назад

I"m just starting out, thanks for all the help so far. Been messing with these profiles today on my S1 pro. The extra fast really cooks my motors any chance of something between Good and Extrafast lol. I"m not lazy, just dont have enough knowledge yet and the build times are killing me 😉, keep up the good work 👍

@stevesweb 2 года назад

Great work as always. I know it takes a ton of your time developing these. It is greatly appreciated!

@haiman116 2 года назад

I was able to take your profile and use it for printing miniatures pretty well. Just changed the layer height to .08 and the temp for my printer and the results are nice.

@hasserecht3678 2 года назад

Hey Chep, why do you skip the 0.16 profile? I often use 0.16 instead of 0.12 since it gives me really nice prints but is faster than 0.12. I rarely use 0.12.

@FilamentFriday 2 года назад

I’m working on a 0.16 as well.

@MattGoodfellow Год назад

Great video, only question on the .28 very fast, why 25% infill? Seems like more than is needed, or that because of the surface?

@trapperkreeper6105 Год назад

Thank you! The hyper fast profile has been a game changer for me. I mostly print large items with minimal details so speed matters to me more than quality since I sand and paint everything anyway. I was previously using a .6 on "Draft" settings and this is still faster even with the .4 nozzle.

@markferrick10 2 года назад

Thank you Chuck. I've been looking forward to your updated profiles. They look fantastic.

@Viking8888 2 года назад

Chuck you are awesome! Thank you for giving these profiles out. I've needed to print a hard drive cage for a NAS for a long time so when I saw this video I immediately added your profiles and saved a lot of time using the Extra Fast profile. besides it going way faster than the default low quality Cura profile, it still looks really good.

@txwombat7826 2 года назад

Whats your latest thoughts on Adaptive layer heights?

@wally88ar Год назад

Hi, newbie here (just one week of printing :). I tested your Extra Fast profile with an Ender V3. Excellent results. I printed a door handle, went from 2 hours with Cura standard quality to 33 minutes with your profile. Functional and good looking part. Thank you very much for your work and greetings from Argentina.

@FilamentFriday Год назад

Glad you liked it.

@sudheer54 2 года назад

Thanks for the profiles, your extra fast works very good. I have a e3 v2 with sprite pro and had to change a few settings with retraction but I've got a lot better with all the calibrations and the prints are coming out perfectly and beautifully. Thank you for all of this.

@SHARLOGS Год назад

Hi @chep, I'm trying to download the Hyper Fast (0.32) profile, but when I import, it shows the Extra Fast (0.28) in the profiles. Why, is it with me only or with everyone?

@ACAB_Media Год назад

Same here! ... Just wrote the same thing!

@mikegidley6429 Год назад

Everyone

@انا_ابراهيم_البناوي 2 года назад

Thanks for these profiles chuck i recently upgraded my ender 3 pro to an SKR Mini V3.0 mainboard and been looking for a good profile and was remineded of your channel keep up the wonderful work a fan from Saudi Arabia

@g.c.6867 2 года назад

Thank you for the profiles Chep. I am getting zits in all the seam spots. I adjusted the retraction and I am still having those issues. Any Ideas how to fix?

@FilamentFriday 2 года назад

Yep. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c_llLYxbJ4A.html

@sambell8768 2 года назад

this might be a silly question, but would the .20 profile work on the CR-10? I've been using your 4.8 profile for the longest time (love it) and before I update I was wondering if this new profile is usable?

@FilamentFriday 2 года назад

Yes it is.

@redpillllama3252 2 года назад

Hi chep love your channel you've taught me everything I know about 3d printing and I'm greatful, quick question can I download your profiles as a cura plug in so I just click and play instead of setting up each profile, I've had to uninstall cura before because I changed that many settings I couldn't find my way back and my prints suffered

@shahram1368 2 года назад

that is awesome. Ive been using your fast profile and I was waiting for you to release one for Cura 5. I'll be definitely trying the hyper profile.

@eg1do 2 года назад

Thanks Chuck! I just got an Ender 2 Pro for my parents house and I'm loving it, these profiles gonna make it even better.

@JimGray65 2 года назад

Man Chuck! You are a lifesaver. Your file did not work with my FlashForge Adventurer 4 so I made a Good and Best from hand using your exact setting and it seems to be printing way better. Also, I actually edited your Ender files to 220 200 and 250 and changed the start and stop codes and it was one of my best prints ever. Thanks.

@polhomarkho5229 Год назад

Hey, thanks a lot for the profiles! It was impossible to do a good print since I switched to klipper, but after some fine tuning and the use of your profiles, it's really nice now! 🙂 I just changed the flow rate to 100% and it's perfect

@ntakland 2 года назад

I have to confess that your profiles helped me a lot. I have an Anycubic Vyper. All i had to do was change the values to match my machine. Works great. Thang you a lot.

@nycpride9 2 года назад

would you please provide a screenshot of the settings or profile I have any cubic viper to..

@chrispearson5098 Год назад

I’ve just purchased an ended 2 pro, and am looking forward to trying this profile, thank you! I have a question, though…. How accurate is your enter 2 pro? My X is a tiny bit out, but perfectly acceptable, my Z is perfect, but my Y can be out by 0.5mm consistently. Belt tension is good, eccentric screws seem fine on the bed, adhesion is great…. It’s just off. I printed one of my prints in a different orientation, and the dimensions were great on the X but not Y… so it’s definitely the machine and not the design. Any tips? Loving your videos so far! 👍

@wallrrusslord4779 Год назад

These settings have made some of the fastest prints and surprisingly cleanest infill I’ve seen to date! Edit: the Extra fast profile is what I used, with a few tweaks to wall thicknesses top/bottom layer thickness, and support systems

@bone6232 2 года назад

Had almost always used your extra fast profile very often since it released. Cant wait top use your new Profiles!

@marsim84 Год назад

Thank you so much for this. It worked perfectly on my ender 3 s1 pro with Cura 5.30. Super fast prints. My 3d printer has just become a lot more useful. Cheers.

@maleko3300 2 года назад

Hi Chuck, I'm trying to use your extra fast 5.1 profile as my normal print profile. It's working great, the only issue I'm having is with bridging. The first bridge layer seems to go down well but then when the 2nd and 3rd go on top it sags really badly, often with the first layer not adhering well to the second (the strands of the first layer can move like gutair strings). I have experimented with lots of different print speeds, flow rates and fan speeds across the 3 brdiges in Cura but don't see consistent results across different models. Have you got any suggestions how to improve bridges? Thanks

@johnpileggi5257 2 года назад

CHEP - thanks so much for these profiles! They are saving me a ton of time.

@mongoro 2 года назад

Prusa slicer 2.5.0 alpha has a lot of the new Cura 5.0 changes. Any chance of you releasing profiles or suggested settings for Prusa/super slicer?

@richiekaye1103 2 года назад

Thanks for adding these,I've been using your FF 0.28 Extra fast profile most and really looking forward to trying these out,I will update your existing Good,Best profiles from previous with these

@Hanzi2u 2 года назад

Same here

@moulinherve8374 Год назад

Hello CHEP. Thank you, thank you very much for your work and these diabolically effective profiles. The only correction I made is the retraction having an E3-S1 with direct drive.

@stevenmurray3398 Год назад

In what way? I have just started out with E3-S1, didn't realize I would have to change something else 🙂

@gdcone8833 2 года назад

How could I use these profiles with .6 nozzle .what changes are needed.

@dn83 2 года назад

just a heads up, ender 3 v2 using microswiss & direct drive. the hyper fast (beta). whilst fast, and gives a functional print, but not the prettiest, it was a lot more jerky, to a point where i think the headend started to loosen slightly. the extra fast is fantastic though, so great balance of time vs print quality for me for anything that didnt require over the top detail, no stringing etc. great video, great profiles. greatly appreciated.

@AZWildk4t 2 года назад

Hey @Chep. I cannot believe the improvements I saw with your Extra Fast profile. I have several lengthy prints to do and the print time has been reduced by 50% or more. Quality is very good. I have a few gears I need to print later today. Fingers crossed the gears will be of good quality.

@qpartyfreak 2 года назад

I found out your hyperfast profile is great for boardgame inserts! This saves me so much time and most designs feature simple token holders and card holders which really don't have nor need high details ;) Really advised to my fellow boardgame friends out there, this speeds up the printing of inserts by multiple hours.

@jus4027 Год назад

Hey chep, really good stuff. Love the extra fast profile. However It's producing an odd effect. Using Cura 5.2.1. There are some odd pimples being produced on the rounded edges. These can clearly be seen in the preview after render in cura. Any ideas. The rest of the print is magic. just these ruff random pimples produced on slightly curved corners, but not all ones, and at random differing heights..