Тёмный

Curling iron repair - Thyristor diagnosis and replacement - Healing Bench #10 

Taste The Code
Подписаться 11 тыс.
Просмотров 24 тыс.
50% 1

This hair curling iron was working but the tip was not heating up so I opened it up to inspect and did a repair. Check out the full process so you can know how to deal and inspect similar issues in the future as many other appliances might work in the same way.
The "healing bench" is a series of videos where I try to repair electronic devices of a different kind. Some are my own, some from friends and I explore them to learn their principle of operation and possibly fix it so it can have another life.
Find out more details of the repair on the Instructables article:
www.instructab...
AOFEILEI Digital Curling Iron
s.click.aliexpr...
X0405MF Thyristor (SCR)
s.click.aliexpr...
Soldering iron kit
s.click.aliexpr...
Rosing Core Solder Wire
s.click.aliexpr...
Wire Snips
s.click.aliexpr...
Curling iron repair - Thyristor diagnosis and replacement - Healing Bench
#curlingiron #repair #healingbench
Main Site and blog: www.tastetheco...
Facebook: / tastethecode
Instagram: / taste_the_code
Twitter: / taste_the_code
--------------------------------------------------------------------
Music:
Loop-Caught by Andrew Langdon
/ @andrewlangdon6130
www.youtube.co...

Опубликовано:

 

29 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 27   
@devidasgawade7595
@devidasgawade7595 3 месяца назад
What's is the zener value beside 10 v 100mf
@TasteTheCode
@TasteTheCode 3 месяца назад
Sorry, I can't measure it as I no longer have the iron. I gave it back once I repaired it.
@19Edurne
@19Edurne Год назад
Wish you had shown how to test the thyristor...
@TasteTheCode
@TasteTheCode Год назад
It usually fails either all contacts open circuit or dead short. Otherwise it has like diode bridge in between.
@19Edurne
@19Edurne Год назад
@@TasteTheCode I wrote that because I've got one that doesn't beep but shows a value (1890) on continuity testing but nothing when I put the multimeter on 2000 Ohms setting. So not being a specialist, I'm a bit puzzled.
@anaaljazzazy3105
@anaaljazzazy3105 2 года назад
Mine is a wire that is not funcioning
@anaaljazzazy3105
@anaaljazzazy3105 2 года назад
Functioning*
@TasteTheCode
@TasteTheCode 2 года назад
That is a typical resistive heating element. Please be careful with it as the mains voltage runs through it.
@Blackwolfvideo1
@Blackwolfvideo1 2 года назад
Very clearly explained, thank you
@TasteTheCode
@TasteTheCode 2 года назад
You're welcome!
@skittlewee4041
@skittlewee4041 3 года назад
My curling iron also stopped heating....but i dont have the tools and knowledge to repair the way you shown 😫
@TasteTheCode
@TasteTheCode 3 года назад
That's too bad. Check with any of your friends. Someone might be into electronics and can try to diagnose what is wrong with it. Last option is to take it to a repair shop.
@maheshhargovind3815
@maheshhargovind3815 Год назад
Hello Sir Ikonic crimper machine Eror shows please tell me what fault
@TasteTheCode
@TasteTheCode Год назад
No idea, I don't own that device.
@suryaprakash6962
@suryaprakash6962 4 года назад
I am having the same problem in Remington hair curler. It's not heating up. According to your advice, I will change the microcontroller resistance. I'll also let you know later on. Let's see, what happens.
@TasteTheCode
@TasteTheCode 4 года назад
I'm not sure how you can change the microcontroller resistance but whatever you do, be careful. The device in question in my case is called s thyristor. It had nothing to do with the microcontroller as it was working OK.
@madhusudhandornala6956
@madhusudhandornala6956 Год назад
I want vega vhch-04 R2 resister value
@TasteTheCode
@TasteTheCode Год назад
Sorry, I no longer have this to check the value.
@arifgulfam2078
@arifgulfam2078 3 года назад
Bro can you give me circuit daigram of this with value
@TasteTheCode
@TasteTheCode 3 года назад
Sorry but I do not have it. What is wrong with it?
@rahulpatelgujratahmedabad3497
@rahulpatelgujratahmedabad3497 3 года назад
Good tiching 👍👌👍👌👍👌👍👌👍
@TasteTheCode
@TasteTheCode 3 года назад
Many many thanks 👍👍👍
@muhammadmughees9869
@muhammadmughees9869 3 года назад
which micro controller is used to control the temperature
@TasteTheCode
@TasteTheCode 3 года назад
No idea. You can't see it on the video but there is a resin blob under the screen that covers the chip.
@muhammadmughees9869
@muhammadmughees9869 3 года назад
@@TasteTheCode ok thanks
@arifgulfam2078
@arifgulfam2078 3 года назад
I need its diagram
@TasteTheCode
@TasteTheCode 3 года назад
Sorry but I can't help.
Далее
This should be illegal… Battery Repair Blocking
19:21
Can Tip Tinner restore a dirty soldering iron tip
9:17
How to fix a broken curling iron - Hot Tools repair
13:05
What Tools I use for Appliance Repair
21:24
Просмотров 21 тыс.
كشف عطل ليس مكواة الشعر
15:28
Просмотров 35 тыс.