Custom dice from start to finish: Casting, Polishing, & Inking

Подписаться 4,8 тыс.

Просмотров 10 тыс.

50% 1

Happy 2023 Dice Lovers! here is a video of the whole process, no voice over, to start the year out :)
Looking for awesome dice casting stuff? check out our shop! DruidDice.com
My go-to resins for casting - To save 10% use the code or links!
KS Resin - www.ksresin.com/discount/Drui...
Art'N'Glow - coupon code DRUIDDICE www.artnglow.com/ or follow this link to have it auto apply - bit.ly/3euXnGx
My go to for resin casting:
Dice Molds: www.etsy.com/listing/1074305902
Mica Powders: www.etsy.com/listing/1143058658
California Air Tools Pressure Pot 365CW - amzn.to/3xbA3V4
California Air Tools Light & Quiet Compressor - amzn.to/3NWFf4N
Ranger Alcohol Ink set - amzn.to/3akIcgT
Piñata White Alcohol Ink (sinking ink) - amzn.to/3teneH8
Finishing tools:
Mini pottery wheel - amzn.to/3MamMAt
Zona Polishing Paper - amzn.to/3PWIElV or www.etsy.com/listing/788370889
12 Volt 2A Power Supply - amzn.to/3HjDKLb
Round Beveled Glass Mirror, 3 inch x 3 inch - amzn.to/3zhblnM
DISCLOSURE: As an Amazon Associate I earn from qualifying purchases.
++++++++++++++++++++++++++++++++++++++++++++++++++++
Join our community here!
r/DiceMaking: / dicemaking
Dice Making Discord: / discord
++++++++++++++++++++++++++++++++++++++++++++++++++++

Хобби

Опубликовано:

19 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@sheliad4165 4 месяца назад

I like that this video had almost no words yet seemed to be the most straight forward one I've seen so far

@ChristiT 9 месяцев назад

The squishy overflow at 13:35ish...sooo satisfying

@IcsulX Год назад

Finally, new videos? Yes pls.

@sheliad4165 4 месяца назад

Very content with the idea start to finish and they mean straight up the start

@chasonlapointe Год назад

What a fantastic first video of a new year!

@Phoangluong 3 месяца назад

Love your work!! Thanks for all the good contents.

@adamwollin876 Год назад

Great video! Really enjoying your channel 😊

@robertpinkston561 8 месяцев назад

I bought one of your molds and they have put out my best dice ever, seriously well made you are incredible at what you do

@DruidDice 8 месяцев назад

Happy to hear I was able to help your crafting experience!

@chrisconner8629 4 месяца назад

I really want one to cast better dice but they are too expensive for my budget. Definitely good looking molds though.

@DruidDice 4 месяца назад

Here's the secret, B grades are just as good with extremely minor flaws but save you upfront 😜 you can see in the reviews themselves most people are surprised we leave them as b grade

@michaeldequatro1012 8 месяцев назад

Glad I found your video. They came out great. I wasn't filling the mold as much as you did. I guess that's why I was getting holes at the top of the die. Now I know :)

@DruidDice 8 месяцев назад

100% I think that's one of the most common early caster unknowns is thinking you got to fill it just perfect. Over filling is your friend, especially when you put it in the pressure pot and all that air and bubbles get smashed down creating negative space, if there's no resin there you get voids!

@michaeldequatro1012 8 месяцев назад

Thanks again@@DruidDice

@ironbomb6753 4 месяца назад

Is this the shop where my mold was made? I love my mold. ❤🙂

@IChaseTheSun 20 дней назад

Beautiful set! I was wondering how you can minimize raised faces on the one face? No matter how much pressure I put on the cap when closing the mold, I continue to get raised faces on a few dice. I've been trying to fix when polishing, but I've over-polished the adjacent faces, creating a little lip. Thank you!

@pillarofcats5019 Год назад

Hey, great video and I love the synth music. If you don't mind me asking, what form of mold release do you use between the base and cap of your silicone molds? Thanks for the the video, cheers!

@DruidDice Год назад

Thanks. Happy enjoyed it! We use a combination of ease release 200 and talcum powder, make sure you wear a mask when working with both though!

@MrNinjalukas Год назад

I was wondering what paint you used for inking the numbers? I saw other people use citadel paints but I wanted your opinion

@msashlynnleona9442 2 месяца назад

Are there any other brand of pressure pots that you recommend and are safe? The California one is out of stock.

@dkunin1985 Год назад

Thank you for sharing! Do you use zona for several sets, or just for one? And no extra polishing with any compounds I see)

@DruidDice Год назад

A sheet gets you 5-10 sets depending on the grade, 30um eats up more so it needs to be replaced more often. Sometimes I'll tumble after polish if the set needs that extra shine!

@XXXChef22 7 месяцев назад

where can i get those pots ? i need abetter one than my Harbor freight one 😅

@user-mj6pp2kd8z 6 месяцев назад

Great video!!! 🎉❤ how long did you leave the resin in the pressure pot? I noticed you set your psi almost at 60. I am currently having issues with the time and psi . The dice are turning out soft and slightly hard and also sticky

@MrKarottenPalme 5 месяцев назад

This really depends on the resin you use. Some have a cure time of 12h, some have 24. 60psi is what most people use to be safe but i've read on several sources that there's really not much of a difference (if any) if you use 40 psi. it's important to leave the resin in the pressure pot for at least as long as you need the resin to cure as stated by the manufacturer of your product. Again, some need 12, some need 24 etc. If your dice are soft and sticky, the resin has not cured long enough. Resin keeps curing over a couple of days anyway. I'd recommend trying what your product states and adding 1-2h on top of that. Also keep in mind that the hardening of 2 component resin is an exothermic reaction, meaning that it generates heat. So if by any chance the place where you make them is cold-ish or for whatever reason you put cold air into your pressure pot, it will delay the curing process.

@marcoantonio-bq6rt 6 месяцев назад

Where i can found that synth?

@ashtonfaulkner9342 10 месяцев назад

Nice! How long are you sanding the dice for? Like how many seconds? And are you doing all sides or just one?

@DruidDice 8 месяцев назад

Can't believe I just missed this! I say in the dice for 10 to 20 seconds on green and then about 10 seconds for the rest of the papers I only hit the faces around the one face for the cap was the rest of them should be nice and shiny though as your mold to grades over time after 20 plus pulls I usually hit all the faces with the final three steps.

@tilkka_ 8 месяцев назад

Do u use mask while sanding? Seems like the fumes from the pressure-release might be worth not breathing aswell. Any thoughts of those?

@DruidDice 8 месяцев назад

When it comes to safety you should always lean on more protection than less especially if you're unsure. Personally for sanding I only wet sand so you're not going to have sanding debris. Now if using a polishing wheel or a Dremel tool there's definitely a higher chance of debris but when it comes to hand sanding or even using a lapidary with a constant water drip it's not something you need to be worried about. The same goes for the pressure pot and casting in general. Unless you're using a resin that needs a proper respirator if you're in a well ventilated area then the amount of fumes that are going to be released are negligible. It's like asking if you should wear a respirator in a parking garage or gas station because there's more exhaust fumes than regular space. Technically yeah I mean it's going to do more to help you than hurt you but in the grand scheme of life is it going to be what caused cancer or what killed you? probably not.

@jackpower2755 Год назад

Sanding/polishing has always been the hard part. Do you sand/polish just one side?

@blueishsio Год назад

Following thread. I also have a lot of overhangs that I can’t seen to cut with an xacto because I cut into the die. Great video btw!!

@DruidDice Год назад

I sand the 1 face and the adjacent faces of each die. I do this is for all the steps. Then if the mold is older I will hit every face with the final step and or polish tumble with 3m compound + wood media and ceramic(50/50 ratio) for 48 hours for the top tier shine.

@chriswalter7334 8 месяцев назад

What grain sand paper do you use? Or is it just a color code i can go by?

@vttvggewui5384 4 месяца назад

I think that he uses zona paper in this video

@teawithkafi6717 5 месяцев назад

How long do you leave your resin dice in the pressure pot?

@DruidDice 5 месяцев назад

24hrs

@Dj_Soundwave 4 месяца назад

Do you sand all the sides or just the top one?

@missmunch2349 Месяц назад

I also came here to ask this

@DruidDice Месяц назад

Just the top face and the adjacent faces to the one face where the flashing is. A good casting should have little to no flashing, so it should take no work at all but sometimes you get thick flashing if you have some chunkies that make its way between the cap and the mold.