Custom DIY Chassis Mounted Splitter for $200

Подписаться 1,2 тыс.

Просмотров 5 тыс.

50% 1

This is my first attempt at making my own fully functional chassis mounted splitter. It was a lot of work but it works so well...
I did a 100MPH run in the car shortly after finishing and it held up great!
All the stuff I used is linked below.
ALL PARTS USED
WOOD USED- www.homedepot.com/p/15-32-in-...
AIR DAM- www.homedepot.com/p/Vigoro-20...
SPLITTER RODS- professionalawesome.com/produ...

Авто/Мото

Опубликовано:

25 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@akirony Год назад

The way you traced it out with that filter box made me feel sooo dumb, that was awesome.

@akirony Год назад

Also the trick they showed me for scrapping is to use stickon velcro felt on the contact points for protection

@zackellis23 Год назад

Hahaha nah don’t feel dumb! I used it so I knew I’d have close to 4” and it would be consistent and easy.

@zackellis23 Год назад

@@akirony that’s a good idea! I appreciate it

@srt-4-thompson Год назад

Man you done killer work on that!!! Goes hard af🫡

@zackellis23 Год назад

Hahaha thanks man! I appreciate it for sure!

@Roobsrandomz Год назад

great work duder! You have such a busy looking under-carriage with that support/traction bar setup + the oil cooler. I enjoy seeing your invested hard work in this car. Cheers brother

@zackellis23 Год назад

Thanks man! I appreciate it! I really do!

@wickedgood1984 Год назад

That came out great. Great use of the filter box 😂

@zackellis23 Год назад

Haha thanks man! I spent like 10 minutes measuring things that were close to 4 inches.

@michaelhollaway4238 Год назад

Awesome bro turned out good af

@zackellis23 Год назад

Thanks man I appreciate it!

@lucasg6830 Год назад

This is awesome

@zackellis23 Год назад

Thanks man!

@frias2287 Год назад

Nice one bro💪💯

@zackellis23 Год назад

Thanks man!

@frias2287 Год назад

@@zackellis23 you're welcome brother, that's why we're here to support you🤝👍💯

@zackellis23 Год назад

@@frias2287 Hell yea man!

@jakeheavlow Год назад

Looking good dude! They are on crack about the rules for the splitter 😂

@zackellis23 Год назад

Thanks man and I know! I read it like 20 times. I was like am I dumb or does this not make sense? Haha

@KingMrBigE 10 месяцев назад

I used Lexan and c-channel aluminum to mount over the lower core support lip and then all the factory holes for the under cover with the exception of the hole at each end by the wheel wells.

@zackellis23 8 месяцев назад

That's actually a really good idea. I might try that

@KingMrBigE 8 месяцев назад

@@zackellis23 yes, its lasted over 10 years and seems to be nearly indestructible. Painted it black plastic paint. Use at least 1/4".

@S_Paoli 10 месяцев назад

winter is coming..... I would love to have that snow plow on my car. (instead of paying my landscaping guy $60 to plow my driveway after each snowstorm) 🤣😂😂

@zackellis23 10 месяцев назад

Hahaha luckily I’m about to move to a warmer climate

@laloow5839 9 месяцев назад

Mopar or no car...? Ok mr....SHAAAW

@brandonshupperd792 Год назад

Zach brother it's time for tires! Also I have a brand new 2.9 bws I'm getting rid of as I went big turbo!

@zackellis23 Год назад

Hahaha I know. I used them so long because I’m switching my set up for next racing season. I have slicks to mount up next year.

@zackellis23 Год назад

Also how much are you asking for the BWS?

@brandonshupperd792 Год назад

Only what I payed $600 I had a 1.0 die that I sent in so I got more off than most. It'll be brand new in box. Email me or find me on Facebook.

@brandonshupperd792 Год назад

Slicks or like a r888?

@zackellis23 Год назад

@@brandonshupperd792 an actually slick. Not gonna be used in the street. I have new wheels for the street. No tires yet. The tires I have now that are bald are re-71r

@jaseindigo Год назад

looks solid but maybe consider painting it in black bedliner as opposed to standard wood paint, will give it more of a high end look and look less wood-y

@zackellis23 Год назад

Honestly a really good idea. I actually have a DIY Composite kit to re-create it in carbon fiber

@Matt.R.B 8 месяцев назад

Would you ever use ABS plastic for this?

@zackellis23 8 месяцев назад

Probably not. Unless I could find one thick enough to be effective but but also lite enough. I have everything to make a composite version but I just haven’t had to to make a video about it.

@timgold7994 Год назад

Did you make the support/traction bar setup for the front or did you buy it? I've never seen one like that

@zackellis23 Год назад

So I bought them used for $200. From what I can tell they are made by Bwoody. Here’s a link. They’re dumb expensive lol www.bwoodyperformance.com/proddetail.php?prod=120.2012

@outdoorchristianboy Год назад

Not made anymore. Have to find them used if you want some.

@zackellis23 Год назад

@@outdoorchristianboy yea kinda figured lol

@lumimobb 10 месяцев назад

there is a guy that sells splitter rods that compress, spring loaded.

@zackellis23 9 месяцев назад

these are carbon fiber rods Im currently using from Professional Awesome. They compress but won't stretch. That's why I can stand on it.

@lumimobb 9 месяцев назад

@zackellis23 I meant collapse. Well at least what they call them. But they have whatever length to them and when you go over something higher they shorten via spring inside. It's pretty cool

@zackellis23 9 месяцев назад

@@lumimobb ohhhh I see what you’re saying. If you remember what they’re called let me know. I’d be interested in checking them out. I think I’m going to try and make version 2 of the splitter sooner than later