Custom Outriggers for LIFETIME YUKON 

Nice, this is the best way of doing it that I've seen so far. I like how you didnt do any unnecessary drilling in the boat or make any crazy changes, great idea using the existing rod holders as a way to secure the board. I didn't think of that, glad that I found this video!

I have been 3 days looking at different plans for DIY outriggers. This is by far, not only the best, easiest setup, it is the best presentation of how you did it. Search is over, THIS is the one I'll be doing. Thank you to both your for your excellent work and your wife for proper supervision of the overall project.

I'm making the swap from whitewater and surf kayaking to fishing from a kayak and this was the best video BY FAR on outriggers for a kayak! Thank you for the excellent video! I'll be Rip'n Lips from my kayak in no time! And not be worrying so much about my big ass going for an unwanted swim! Rip'n Lips in Amarillo Texas!

Definitely going to set this up on my yukon. May try to have it interchangeable with a landing gears for transport

this is the best DIY for outriggers . Thanks for the video!

Thanks for sharing your work. I'm gonna do similar to my kayak while leaving a gap between the yak and the outriggers to fit in my watersnake trolling motor.

Thanks for making this video. Very informative and most of all functional. I like that you used the 1" sections to go inside the 1" 1/4" to allow for easy removal while transporting. You could incorporate at least three rod holders in the 1" 1/4" behind the seat if you felt you needed them. I also have the 27" fenders. They are a lot more stable than the smaller 23". I have a Brooklyn RA220. It's 11.5 ft. so at 34" wide by 11.5 ft the 27" seems much more appropriate. Thanks again. Please end me links if you have other videos.

Instead of vice grips, put two nuts on the bolt (after your bolt is screwed on a ways) you can tighted those two nuts together so you can then use a wrench on one of those nuts to hold the bolt still while you finish screwing down the nut. Once your main nut is tight, you can just remove the other two nuts.

Great job on the design. I definitely want to incorporate some of these ideas. I’m trying to find a way to make it easily removable so I can load my kayak on my car.

I did mine this way.but i added 2 45 degree ells 10 inches apart on the main pipe and a small pipe on the woth another 45 to strengthen them out and now i jave 2 rod holders behind my seat

nice job definitely ill repeat that on mine thanks

i like your ideas as i have the same boat and was trying to think of ways to put on out riggers for myself. im not a big man weighing in at about 5'10" and 200 but i am pushing 50 and my balance isnt quite what is was i can stand in mine but not very convincing doing it. my 21yr son about the same size stand in it all day. thank you for the idea

Good idea . Waterproof boat varnish on the board would make it better. Thanks

The blue glue is for when you're trying to glue up in water so it sets up faster Audi's makes blue in a red can that's all purpose that works really well and is clear. Been Plumbing for 18 years beautiful family thanks for advice on the anchor Trolley system and works great God's love

You know, the method of attachment is sturdy enough you could use the same to attach a trolley wheel also. The issue would be bracing the wheels because of the long moment arm and stress to the attachment. Urey struts or even para cord running fore and aft to pad eyes could give support to the deployed wheels.

Well executed, I'm just finishing up mines . Thank you for the video..💪😎🤙

Nice job! Congrats!

Good design maybe use schedule 80 pvc pipe much stronger

It will still drag to a certain extent. We know because we built one similar to this two years ago. We have a idea to make this better but have not had time to make it better yet😄

Very Nice ... Hope these work out well for you

Nice job 👍

i like your set-up.

Great job

Great idea! I’m looking to do something like this myself! I’m trying to figure out a way I can flip them up when I’m not using them

Nice write up.

Does your outrigger system interfere with your anchor trolley? I have concerns about that.

Very nice how did you find out the length of the pipe attached to the float I see some people that have their floats under the water but yours looks perfect

I thought in your video you said you were gonna post all the material and all the links from your build it be handy because I have the same kayak just newer

That's bad ass dude!

I'm looking to do this and was wondering if the 8.5x27 is the go to. I'm probably about as big as you are and was wondering if a 6.5x23" would work the same. Hard to come by the bigger bumpers.

Very nice ,

Boa tarde blz Show parabéns mandou bem Sucesso top tmj 👊 🎣🎣🎣

Nice! How much of a difference did it make on drag while rowing, since they are in the water? I am trying to get a design for my kayak but I don't know if I want them to be that far into the water and make it harder to row.

Will these help slightly increase the carrying capacity as well?

did hey interfere with your paddeling??

What diameter is the floats?

Why not just mount the pvc straight to the kayak why the board? Seems like added weight for nothing

Paint the board .

Strait up took, A & T Tech Outdoors video remade as your own and gave them no credit.....

Loose the musuc.....it is very distracting and does nothing for the video !