CUSTOM Tau Battlesuits for Warhammer 40k - The Sakura Sept

Подписаться 267 тыс.

Просмотров 38 тыс.

50% 1

Power Your Tool, with MSI! msi.page/PowerYourToolxTablet... (spon)
❤️ JOIN the MINI CLUB (Patreon)! / tabletoptimeminis
🖌️ Get our MINIS: www.itstabletoptime.com/colle...
👕 Get TTT Merch: www.itstabletoptime.com/colle...
TTT DISCORD: / discord
Twitter @TabletopTime
Reddit: / tabletoptime
*** Chapter Markers ***
0:00 - The Sakura Sept Rises: Introduction to Dave's Custom Bits
0:26 - Honouring Tradition: Dave Sculpts New Shoulder and Knee Armor
2:14 - Weathering the Print: Jenn's Insights on Weather's Effect on 3D Prints
3:06 - Assembling the Battle Arsenal: Jenn Builds a T'au Battlesuit
4:10 - Sponsored by MSI: Empowering the Sakura Sept
6:17 - Advancing the Artistry: Dave Updates the Helmet and Designs Missile Pods
8:06 - Brushstrokes of Honour: Jenn Paints the Mighty Battlesuit
9:38 - Unyielding Defense: Dave Sculpts an Energy Shield
11:15 - Colours of the Sakura: Dave Paints the Battlesuit Shield & Helm
11:42 - Guided Missile Perfection: Murray Paints the Deadly Missile Pods
12:05 - Embracing Nature's Beauty: Jenn Paints the Serene Base
12:27 - The Sakura Spectacle: The Suit-Up Sequence
12:35 - The Blossoming Unveiling: The Battlesuit Revealed
13:02 - Gratitude to Our Supporters: Patreon Shout-Outs
13:30 - The Way of the Sakura: Conclusion to the Custom Bits Episode

Игры

Опубликовано:

2 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 111

@TabletopTime 11 месяцев назад

Power Your Tool, with MSI! msi.page/PowerYourToolxTabletopTime (spon)

@marafey7412 11 месяцев назад

I would love to see that shield done with larger petals printed in a clear pink resin, like the petals were an energy projection

@LEF3133 11 месяцев назад

I hope the shield spins and the petals expand out with an energy shield kinda like the sith umbrella saber 😅

@wifi8366 11 месяцев назад

I’m so glad someone finally does tau!

@patches5410 11 месяцев назад

love that you went the extra mile and made sure all of the fabric was flowing the same direction that was always one of my biggest pet peeves

@B1ackSwordVids 11 месяцев назад

Yea! This is what the hobby is all about! I love the customised parts! Amazing work!

@joshuaedley5191 11 месяцев назад

Very true that is what our Hobby is about.

@CreativePhenomenonArt 11 месяцев назад

Guys!!! This came out so dope. The details on the Sakura flowers 🥰 I loved this build from the beginning and now even more. Can’t wait to see this in action 👍

@tiedyedbeard3439 11 месяцев назад

They should totally continue this series by customizing all the various tau units. Would love to see like an oni xv-88.

@flamingbullett 11 месяцев назад

Absolutely adore the custom bits and army videos

@SWATDRUMMUH 11 месяцев назад

I did like the first iteration of the sept symbol, but I guess the second is more streamlined. The petals are the sphere expansions while the circle, or core, is the tau homeworld.

@redthecrusadertiktok 11 месяцев назад

I wish there were more tau mech kitbashes, It seems like the perfect kit to convert

@Mrjohnsluke920 11 месяцев назад

Please keep this going the Tau need the love desperately 😂 love your conversions

@kewedog7566 11 месяцев назад

Yes i have been waiting for more sakura tau content this is one of the best the convertions are so sick

@Matt-md5yt 11 месяцев назад

Glad you updated your Tau bits

@yellheahtris 11 месяцев назад

I loved seeing the progression of 3D modeling from you, Dave! You're continually making huge strides in your skills and it's fun to see! This is also one of my favorite schemes ever, and it looks just beautiful on the model. I have nothing but compliments! Amazing job, Dave, Jenn and Murray!

@foreverfornever1124 11 месяцев назад

Really love the continual updates on this army! Defintely more refined and is increasingly becoming more unique with each model/unit yall tackle

@turnipslop3822 11 месяцев назад

So impressed with how fast and well Dave has made progress with digital modelling. It's very inspiring and I love watching the process. This is something really unique that TTT has showed me here. Thanks again for these videos and great work Dave!

@joshuaedley5191 11 месяцев назад

Wow I love the designs for the tau bit they look awesome.

@RyanEdwardsVA 11 месяцев назад

Oh yeah, love these videos! Custom armies are the best. As for resin printing in cold weather, many people swear by heating the resin up by submerging the bottle in a hot water bath before printing, and then letting the heat generated by the printing process do the rest of the work in keeping the resin warm.

@anguschamberlain633 11 месяцев назад

It is beautiful and I’m really exited to see you do a 3rd and finish the squad 😊

@jacksondutton4291 11 месяцев назад

Excellent work Dave + Team!

@cerisekappes580 11 месяцев назад

Love the custom parts! 😊

@redthecrusadertiktok 11 месяцев назад

I hope that Mari and Jen make their own custom factions to fight the Sakura and Space Bears

@lofiworkshop 11 месяцев назад

Another beautiful Sakura Tau model. Great work, all!

@grantnewton4230 11 месяцев назад

Sooo happy to see more Sakura sect. I love the Astra Primursa but I can’t wait to see more from the Sakura and Hive Fleet Jotunn

@davidjohnson9521 11 месяцев назад

The upgrade looks amazing

@John-lo2wn 11 месяцев назад

That looks awesome!!

@whooba2172 11 месяцев назад

BEEN LOVING THE T’au Videos

@jessicahawkins669 11 месяцев назад

. . . Dave. You’re making me seriously consider getting into Tau. And I can’t afford that! These parts look stunning. I love the two shields the most, I think. A good, eye-catching banner is lovely to me.

@davidprins86 11 месяцев назад

Really Really cool! I love the samurai setting

@Schelome 11 месяцев назад

This Tau series keeps delivering, very impressive progress in Blender!

@elixiris4101 11 месяцев назад

Upvote for all the shots of Dave's concentrated face staring at the laptop :)

@oorlogshamer688 11 месяцев назад

You guys should consider a small heater for in side your resinprinter enclosure. It heats up the resin and the enclosure. The heater contains a Thermostat so the temperature is fairly constant. Google resin printer heater and you'll find the heater under several brandnames. They all look the same. Snazzy white with a red display

@serrion1394 11 месяцев назад

The suit looks amazing :D

@kieran2221 11 месяцев назад

Well, you've inspired me to pick up Blender again and start sculpting! Thank you :)

@migueldelvalle3871 11 месяцев назад

Looks awesome

@Shaquille_oatmeal183 11 месяцев назад

I would love to see a video about diffrent factions like the tau but with a nurgle plauge marine sort of vibe

@Shaquille_oatmeal183 11 месяцев назад

I am aware i spelt plague wrong

@roryhatfield6696 11 месяцев назад

Really cool 😮

@commissar_dk420 11 месяцев назад

I cant wait to see what you do to make your own Commander farsight!

@_ithinkmodding._3740 11 месяцев назад

This is amazing I love the samurai theme! How do you get the default panels to build the new plates from with the correct size?

@lplost 11 месяцев назад

Really cool army project,!

@ClarissaMeyer 11 месяцев назад

Why does it look cute? Maybe it's the three "eyes", and how it is peaking over the edge of that shield? And kudos for editing in those assembly sounds!

@wocky7369 11 месяцев назад

These looks so unbelievably goof

@Wolfineer_ 11 месяцев назад

I love you guys but if that was a standard town water piped sink, print water down the drain is a big no no. Even using 'water washable' the water still needs to be treat exactly the same as dirty ipa would be (let it mostly evaporate and then dispose of the solid/semisolid remains at a disposal site).

@cameroncharles 11 месяцев назад

Regarding printing in the cold, I can recommend a vat band, been printing throughout this Tassie winter and it's been great resin stays at around 25 degrees and the prints have been perfect, which was not the case last winter without the band

@recurvestickerdragon 11 месяцев назад

the support-removal asmr

@sbloyd 11 месяцев назад

RE: temperature and adhesion and stuff - there are a few things you can do to alleviate this problem. Some people have had success with using home-brewing thermal belts, wrapped around the vat, to keep the vat and rein temperature warm. Others get grow-tents for plants, and put the entire printer in there. Just a thought!

@mistformsquirrel 11 месяцев назад

*this is so cool*

@ZeraEmbers 11 месяцев назад

For the Greater Good!

@luketfer 11 месяцев назад

Once again I'll recommend the channel Artisans of Vaul for guides on making stuff in Blender for 3D printing specifically for 40k scale wargaming (28-32mm), I highly recommend his video "the Do's and Dont's of Booleans' for beginners.

@murphy7801 11 месяцев назад

You should keep this series going

@WSJeffery 11 месяцев назад

Does make me want to do a tau army... which is something I never thought I'd say.

@oliverwright2081 11 месяцев назад

watching this while painting my t'au farsight enclaves

@thecactusnoob8903 11 месяцев назад

I just realised that the fatigues were green 😂

@Tarothteam 11 месяцев назад

Please do a space bear vs Sakura sept rematch! It would be so sick with all the new models!!!

@szabib8048 11 месяцев назад

That *shiiing* sound effect hurt my ears being used throughout the whole video, but the end result looked pretty dope! The samurai/sakura theme came together beautifully on the model(s), and is fitting the wh40k theme nicely. Now all we need is a new campaign with it! (Perhaps a roleplay session with the models included?)

@murphy7801 11 месяцев назад

What sound?

@ovan2190 11 месяцев назад

The question isn't if rope looks weird on a mech. Is it as ridiculous as anything Gundam has done? lol love how the Sa-Kura have evolved it's like watching how Jazza made the space bears simple conversions are great but then things evolved great video!!

@LouisXavierBRUSSET 11 месяцев назад

I am a big fan of this Sakura Tau faction....

@SWATDRUMMUH 11 месяцев назад

Could these perhaps be upscaled for larger battlesuits?

@braumburr3343 11 месяцев назад

Which figure type would be best wielding a kanabō? always thought it would make a good ray melee weapon.

@leonaluceid2388 11 месяцев назад

Ohh maybe you can make Melee tau using Power Nodachi or power Naginata

@aaronfulton4826 11 месяцев назад

We gotta get farsight in this army, he would look dope with these mods and In this color scheme.

@swakage13x 11 месяцев назад

Now just need a version of farsight and sakura drones

@ENaielo 11 месяцев назад

Just a heads up, you are not supposed to be pouring resin or the water you rinse your prints down the drain. its bad for the water supply, read the safety sheets on resin its nasty stuff.

@inzyniertv9305 11 месяцев назад

Nice

@theticksquad8218 11 месяцев назад

Im getting Ghibli's Castle in the Sky vibes, maybe its the eye sensors but they kind of look like the Robots from the movie.

@shanbyrt 11 месяцев назад

More table top time

@euansmith3699 11 месяцев назад

Hacker Jen and Mobile Working Dave 😄😄😄😄👍

@makeshiftminis9090 11 месяцев назад

Nifty

@metalicidee 11 месяцев назад

Sakura Riptide, when? :D

@Novastrom 3 месяца назад

I tried to contact you on your website regarding these files. Am I being stupid but I can't figure out how to join the leg plate to the tau hip? my file doesn't contain a part, neither does the pics on the website and it doesn't fit over the existing upper leg. Thank you!

@robo1540 11 месяцев назад

i was really hoping youd change the katana to be sheathed blade facing up the way real samurai had it, i know its a small thing but it bothers me to no end lmao

@murphy7801 11 месяцев назад

The rope is Carbon nanotube cables, my kroot spy tells me

@Pladshirtman1924 11 месяцев назад

Just got into 3 D printing and quickly realized that I’d have to spend an addition 30 to 40 dollars and get a vent for the room I’m 3D printing in.

@luketfer 11 месяцев назад

Yeah....be VERY careful with that, you're going to want to fully enclose the printer and then have an extractor sucking out the fumes if you're printing in a space you frequently use (like in a studio apartment). Resin fumes are hellaciously toxic and we don't know the long term affects of exposure to resin fumes (either way it's not going to be good). Considering most people wear a respirator whilst taking out their prints/pouring in the resin...so yeah just...be very careful.

@Pladshirtman1924 11 месяцев назад

@@luketfer thanks man! That’s a great idea. I’ve been playing with the idea of buying a lab hood and then hook up a few extra fans to vent the room properly.

@TwinSteel 11 месяцев назад

🥳❤️👍🏿

@SeraphimKnight 11 месяцев назад

as a canadian, hearing an australian say 15-20C is "super cold" is hilarious 😂

@raffia16thblaze10 11 месяцев назад

unfortunately since these bits are commercially available 3d printable files now. GWs rules wont allow the sakura sept on the table. QwQ

@aggonzalezdc 11 месяцев назад

All i can see is that the missile is so much shorter than its can. Why?

@untitti9314 11 месяцев назад

美麗

@itsgab5745 10 месяцев назад

Hear me out. Space marines as Oni.

@abagelplays9592 11 месяцев назад

looks fuckin awesome, on another note you okay dave? you look pretty tired. keep up the great work so long as yall make sure to get some sleep (idk maybe im projecting)

@robbie_the_mastermind2176 11 месяцев назад

Are they Chinese Samurai?

@skinniestfatman5641 11 месяцев назад

would love to see a commander model with a Katana blade

@lockkey1980 11 месяцев назад

Guys! Keep this up and I’m at risk of making a new army. Greater good for my hobbying but greater bad for my wallet.

@Hukahey 11 месяцев назад

So bad I love your adds ha ha

@XYZdude00 11 месяцев назад

Fun fact, medieval Japan didn't have mass battles, so they didn't develop traditional shields like we see in the rest of the world. In fact, their large shoulder pads are a substitute for shields.

@ErebosGR 11 месяцев назад

Fun fact: You're wrong. Ancient Japan used handheld shields, but they were phased out from around 500 AD and onwards when cavalry and later the introduction of the samurai caste proved the most efficient power modifier on the battlefield. Handheld shields are ineffective against cavalry, so the foot-soldiers (later Ashigaru) became mostly pikemen. They did still use stationary shields though, for their archers and later musketeers. Another fun fact: The T'au were inspired by China, not Japan.

@XYZdude00 11 месяцев назад

@@ErebosGR Medieval Japan=/= Ancient Japan

@ErebosGR 11 месяцев назад

@@XYZdude00 You said they didn't have mass battles, they did. You said they didn't develop traditional shields, they had but they weren't useful anymore.

@Iron_glove 11 месяцев назад

Did you cured the miniature before washing it down the sink ???? If not, never EVER wash an uncured resin down the drain ! Even washable ones ! The water need to be disposed correctly !

@Frozenkoldfury 11 месяцев назад

Have you considered adding an apostrophe to the Sept name, something like Sa'kura? Feels just a tiny bit more T'au to me. Regardless, these are all pretty sick conversions Dave!

@forrestr100 11 месяцев назад

Just being nosy, is Jen and David a couple? That would be really nice because they seem to compliment each other.

@twisteraustralus 11 месяцев назад

Commander farsighted with an O Dachi? (Japanese great sword)

@bigboi193 11 месяцев назад

i commented

@ErebosGR 11 месяцев назад

Do y'all not know that the T'au were inspired by Communist China, not Japan? The Aeldari were the ones based on feudal Japan, and the Drukhari based on their imperial militarist period.

@QuinchGaming 11 месяцев назад

You make me want to buy Tau again.. STOP IT!

@matthewgagnon9426 11 месяцев назад

Please don't rinse parts in the sink, even water washable resins are still toxic.

@remington8455 11 месяцев назад

yikes.... when are these ads gonna stop. I mean, get that bread but half the video is *Insert shot of Dave with MSI laptop*. And that's on top of a 2 minute ad in the middle of the video

@TabletopTime 11 месяцев назад

They literally make the channel possible

@remington8455 11 месяцев назад

@@TabletopTime I'm a man of subtlety what can I say 🤷‍♂? But I respect the grind