Customer States (Welding FAILS Compilation) | Just Rolled In 

Hope you guys enjoy this booger weld compilation! Submit your clips/photos on our website at www.justrolledinyt.com

Some of these 'welds' are almost like art. the patience and comitment to doing the wrong thing is staggering

Using a welder to fix a fuel leak sounds like a Darwin Award candidate.

When installing a new exhaust, always make sure to use the ENTIRE spool of wire.

You know, I have more respect for customers who are honest about who did the work instead of "another shop".

"Structural booger welds" is a phrase that makes me laugh and cry at the same time.

This channel might be the most quietly terrifying channel on RU-vid. Well played.

I've been a mechanic for 60 years and I'm the first to admit I'm not a good welder but my worst looks better than anything shown here. Absolutely amazing the shit people do to their vehicles. Quite scary knowing these things are out on the road with us!

This channel is the best answer for the profound need for state safety inspections, environmental compliance inspections and so on. good freaking god these people are a menace and these poor mechanics are the only ones who can save us from their sense of adequacy.

the jb welded oil filter killed me. Bro they are like 17 bucks at advanced. 🤣🤣🤣

To try to fix your fuel line leak with a welder truly puts you at another level

Good to see that shops are reciprocating on the customers who “decline repairs”.

The Astrovan with the welded idler arm and no front shocks, and the trailer coupler that was unwelded are two of the scariest stories on here. We all know that they continued to drive or tow with all those problems. Really gotta love the Chia Pet welds on the exhaust pipes on so many of the cars!

that cracked wheel is probably the best welding work done on any of these clips, though I'm sure that would have been fun to try to balance to say the least.

The 7 billion “tack” method is painfully hilarious. The fact that there were so many examples of the method being used absolutely mind blowing.

Some of this work by “friends”. With friends like this you don’t need enemies.

I think what's most impressive about the massive weld jobs done poorly, is that they are done consistently poorly, indicating that not only did that person have absolutely no idea what they were doing, but that they spent hours (tens of hours?) welding and learned absolutely nothing that entire time.

Welded the fuel line, wowzers.

Over 30 years under a welding hood. I’ve seen a lot but oh man, the dedication to doing it wrong is strong with some folk.

Remember to hold the welder at least 6" away from the steel to make sure you get the maximum amount of bird shit on there.😂

"And he re-did the whole exhaust for the customer." How refreshing! Much better than "customer declined repairs."

These mechanics are far braver than I am; I wouldn't want to be underneath most of these vehicles as they look like they could just break apart at any moment!! The phrase "Just enough knowledge too be dangerous" applies to pretty much everything here!!

It's reassuring to see these videos and be grateful for living in the southern region where major frame rust problems are not as prevalent.

Just Rolled In induces existential angst in his audience without a single shot of spray foam.

These make me feel so much better about my welds. I've never had anyone show/teach me how to weld but mine look professional compared to these!

Some of the most glorious weld nests i have ever seen.. They remind me of those sculptures of insect mounds.. when they pour the molten metal down the hole then dig them up rofl.

Man as an amateur working on my mustang, seeing this makes me feel real good about my welds. I thought mine were bad but these are on another level. Even had to replace the rear frame rails with custom one.

Soup cans were the best for fixing exhaust leaks on my car when I was a broke kid.

Watching these clips makes me thankful that I live in the south without the major frame rust issues .

I've seen some bogger welds in my day, but some of these were like terrycloth!

The oil filter is wild. Used 8$ worth of JB Weld on a 5$ oil filter

I can't imagine why that u-joint was vibrating 🤣

"The shop/technician refused to work on it." Best decision ever. In many businesses the quality of the customers is as important as the quality of the work which keeps them coming back when something else needs fixing. Good work for good customers will often bring in more 'good' customers: The power of "word-of-mouth" advertising is often seriously underestimated.

Lol! "I don't know what he's doin', but he's doin' it himself!"

Get chills by looking into a crystal ball & see these customers in the future working with their welders on an electric car, god forbid 😮‍💨

*(**1:44**)* - It's like the person just took whatever metal items he could find in the garage and welded them to the vehicle. Holy crap that is insane!!!

2:43 holy shit. I think that qualifies as art because it stirs up emotion

There's not a cave in the world that can match the beautiful, crystalline structure known as booger welds.

The customer did not mention what other shop did this, is my favorite running joke hahaha

This makes me feel pretty good about my welding.

Can we get a video of the opposite? The BEST weld repairs you’ve seen? Weird, unexpected repairs done with a welder/JB Weld that are just amazing. And ones that improve the car beyond OEM!

"It´s a load-bearing booger ! "

I genuinely don't understand how people end up welding like that. I picked up my first welder at... 11 or 12 years old. The type with the carbide gas that you had to fill up and wait for the gas to fill up and raise the catch tank. I was told what to do, and sure, it was a sh!t weld, but it wasn't anything like this. I got my first stick welder (second hand) at 15. Wasn't told how to do anything with it, welder better and better. Never popcorn. My first mig and tig rig was at 16 and while i had issues with melting through, i've never managed to make popcorn out of it. Most of my early learning was by ear. I was 21 when i went to properly learn how to weld. I never saw welds like in this video (and across the internet) from any of the other people who learnt welding in that class with me and we were 30 people in that class. So i must conclude that this is just a super power... but in the negative. You have to be special to popcorn.

$70 bucks via Amazon and You Too can be a Welder!🤣

The three stages of welding. 1. Pecker Weld 2. Booger Weld 3. Hornet's Nest

Some of these folks welding up exhaust systems should switch to making metal art porcupines. Pretty sure that is where their talent lies.

My question is, how can the guy doing the voice-over do so without bursting into outrageous laughter! I mean, I'm watching this and my sides are hurting! I can't imagine trying to read copy for these disasters!

WOW 😳 terrifying that we're sharing the road with these death mobiles.

I am here because my old vw bus is rusty and i want some tips for welding. Thanks for the good instructions, but i think it is to much effort and i will maybe use just spray foam 😊

As a long time welder, can confirm. I had some real hilarious repairs brought into my shops to be fixed right after some of these guys got at them. My personal favorite was a 72 Dodge Dart with a rear frame rail and leaf spring mount made from booger welded 1/2" thick diamond plate steel. The "repair" was so heavy the entire side of the car drooped and the tire was rubbing the inner fender liner. I cut out the entire trunk floor and both rails and it must have had 700lbs of steel attached. It was truly crazy. Whoever did it had to have spent HOURS doing all this stuff, especially with the welds it had. True dedication! It took like 2 minutes to cut it out since it was so poorly welded. The girl who owned it was horrified when she saw the mess.

That one exhaust had $100 worth of JB weld on it. Lol.

The fuel line?! The F***ING FUEL LINE?!?!?!

My friend has owned his own muffler shop where we live for 25 years..oh the stories he could tell ya about some welds he has seen.😂😅 He started taking pictures about 10 years ago,and posts them on his bulletin board.😊

welding a fuel line - Darwin award material right there

Makes me happier after a colleague was slating my welding. So far my work hasn't failed but his has!

Amazing but that Lincoln navigator broken before ever being delivered was one of the most amazing. The fact that people did this welding stepped back and looked at their work and decided it was good enough is just stunning.

Welding experts!💪👍👍

I'm going to keep this video in mind every time one of my favourite content creators say they're bad at welding. I'm hoping it will lift their spirits, and give them confidence that they're almost professional in comparison to these.

I don’t understand how so many people can be so clueless these days with all information on any subject on the internet. We used to have to go to the library for this information and it was hard to find.

Some of those welds looks like the swallows nest. Pure art.

These people must be exhausting more time and money than it takes to have someone do it correctly.(mainly the welded exhaust clips)

It take hours to make that many stuck welds. True dedication.

Thank goodness we now have spray foam to handle these kinds of repairs

Mary Bonham, who developed JB Weld with her husband in the 1960s in Sulphur Springs, Texas, recently passed away. RIP to an icon.

They drive among us. Greatest pro-seatbelt video ever.

welding on not just a fuel line, but a leaky one is just too classic!

This was excellent!! Structural booger welds 😂🤣😂🤣 your the best!!!

I did patch up a hole in the spare wheel well on my car once, in the most botched way you can imagine. But that was just to keep water out until I could get it properly fixed, which I did a couple of weeks afterwards. Some of these folks on here are on quite the level!

"Here, Bubba, hold my beer while I weld this fuel line!" 🎆

It's amazing that these people are still alive.

This just never gets old.....

"welded" his fuel line lmao the stupidity is off the charts. Amazing he lives to tell the tale

The welding seen here, makes my sh t welds look downright beautiful...😂

I'm no certified welder, but I have been welding equipment, rock crawlers and trailers up for 30 years with good results. We all have to learn with practice, and I didn't know what I was doing in the beginning either........that said, I cannot for the life of me understand how so many people can lay down that much wire without stopping and asking themselves, "Should I stop and try something different?" I mean, have they never seen a proper weld before?.....do they not put together that this looks NOTHING like what it should?.....Baffling!

It's easy to turn on a mig welder. Pretty fireworks too.

As a previous dealership owner, one of my favourite welding events was this: A lady comes to us with a Ford Escort Mk 3 which needs a new battery box welded in. A design fault made this a super common repair. We quoted her the going rate for the job, around €100. She left and took it to a local back street garage instead. As they were welding the vehicle, they caught it alight and the car completely burnt out. When the woman arrived to collect her car she was asked before seeing it, if she was insured .. Puzzled she said "Yes ... why?" They then showed her the burnt out car and said: *"You can claim for that on your insurance ... and you owe us €35 for the welding"* 😆😂😊 ... True quality customer srrvice!

Tried fixing a fuel leak with a welder. 💥

0:38, I wasn't ready for that.

The worst one are the cheap ones, what's the thought process behind trying to DIY fix a leak on a fuel line or a tie rod with a welder...

JB Weld dissolves in petroleum, like gasoline and oil. LOL

how much does JB weld cost compared to an oil filter?

Once in high school, we went to the modern art museum in Chicago, several of these fine exhibits should be on display there!

do these people not know they need shielding gas with their tig/mig welding? or just not care? I just wonder, because I know this, and I have literally never welded anything.

The welding on that cracked rim doesn’t look too bad! 👀

These people need to find better "friends" that actually know how to weld 😂

Now all we need is a spray foam fixes everything episode 😂😂

From foam to JB weld...what's next Zip Ties

Fascinating "repairs" you have there.

how in the hell do they manage to put on those booger/popcorn welds and how long does it take them to get them so thick.... jesus Edit: Like for real, do they just keep the car running and weld until the exhaust pipes stop smoking?

A hedgehog or porcupine exhaust system is definitely a must have on Mad Max cars.

Some of those exhaust welds 😲 did they try to weld without gas but not using flux core wire?

Got to love those hairy FCAW welds. Like a Chia Pet.

$150 Harbor freight wire feed welder ... everyone thinks they can weld now.

I used to use JB Weld as a quick patch on small holes on canoes and boats that had been run into rocks, but I never thought about using it for structural auto repairs. I guess I don't qualify for "other shop worked on it" status.

...when i watch these videos ..all i do is laugh....wow.....

These homemade weld jobs look like a Chia pet made a home on their exhaust pipes. I got a rash watching this video.

Those welds look like they were done by an artist. Unfortunately the artist was Stevie Wonder. Oh well, a grinder and paint make you the welder you ain't.

the most amazing thing is that half of these "repairs" would have been not only faster but probably also cheaper with the right spare parts, not to mention perfect quality (talking about exhausts, the fuel line, the brake pad, fuel lines/filter o-rings)

why are these people try to mig weld without gas?

Every video on this channel makes me laugh out loud at least once.