Тёмный

Cutting Board made from Recycled HDPE Plastic 

Brothers Make
Подписаться 508 тыс.
Просмотров 3 млн
50% 1

💚 A huge thank you to The Brotherhood: / brothersmake
♻️ Check out our recycled plastic store: www.brothersmake.com/shop
In this video we turn a load of milk bottle tops and other recycled plastic we have been collecting into a fully functioning chopping board - we even included a juice groove! Something important to note is that the low melting temperature of HDPE means that this should not be used for anything hot, nor should it be used as a surface to rest hot saucepans on. However it is perfect for cutting fruit and vegetables etc. It shouldn't be dishwashed but is very easy to clean.
We are aware that there will be a lot of comments regarding the safety of using recycled plastic for items that come into contact with food. We have researched this fairly extensively and we are confident that our process is clean enough to produce food-grade HDPE: HDPE is a food-grade plastic, hence why it is used for milk bottles and packaging for other edible goods. This is most likely sourced from raw (or 'virgin') polymer which means that it has not gone through a recycling process. This issue with recycling plastic is that there are multiple avenues for the plastic to become contaminated. The 3 main ones being;
1) Remains from the previous content it was holding
2) Labels/residue left on the plastic itself
3) Potential 'burning' of the plastic, which introduces toxins (both as fumes and within the resulting plastic product itself)
We are very meticulous when it comes to the cleaning of our plastic. All plastic that we receive is hand-sorted to ensure it is indeed HDPE and that there are no non-plastic contaminants left on the plastic. We run the plastic through at least 3 sorting and cleaning cycles before we ever introduce it to heat. This covers (1) and (2). HDPE's burning point is anything over 180 degrees Celcius. We have had enough experience with melting this plastic to know when it has got too hot. We keep our over/grill at around 140-160 degrees, which never introduces any fumes or burning to any of the plastic. This covers (3).
The US Food and Drug Administration has recently (March 2020) approved recycled HDPE to be used for food and drink packaging providing the feedstock is food-grade and contaminant concentrations were below its “threshold of regulatory concern” (0.5 parts per billion or less in the food). [bit.ly/33F4Ueq]
If you are still concerned about the use of recycled HDPE for use with food then feel free to not use it yourself! We have done the research and have decided that we think it is safe based on our specific process.
This video is not telling you that you have to do this, rather it is showing you what is possible! If you enjoyed the video or learnt something new, please consider subscribing. Thanks!
#BrothersMake #HDPE #PreciousPlastic #HDPERecycling #RecycledPlastic #RecycledPlasticBottles #PlasticRecycling #CuttingBoard
Get started recycling by checking out our EQUIPMENT links:
amzn.eu/6VlmURY
Consider supporting us on PATREON:
/ brothersmake
Follow us on INSTAGRAM:
/ brothersmake
Link to our MERCH store:
teespring.com/en-GB/stores/br...
Check out our PLAYLIST with all of our HDPE videos:
bit.ly/2SARcTo
MUSIC:
'Hanging Out' - Bruno E
'Dude' - Patrick Patrikios

Развлечения

Опубликовано:

 

7 авг 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 3,2 тыс.   
@melissasmith8582
@melissasmith8582 3 года назад
I really appreciate seeing how you were able to take plastic bottle caps and recycle them and make them into something useful... And then to see you further save the plastic shavings and recycle those too... I may not be able to make it but I would love to see more of that in this community here...🤔... Then again, everybody does start somewhere Thanks for the video guys... Loved it!
@BrothersMake
@BrothersMake 3 года назад
Thanks so much!
@megatuanis
@megatuanis 3 года назад
What a beautiful work of art, but I'm wondering how many man hours is needed per cutting board? How much would it cost if I wanted to buy this particular board? Just curious.
@2Kaleth
@2Kaleth 3 года назад
Really nice job! How do you collect so many caps that you can sort them into colors?
@debkrogman134
@debkrogman134 3 года назад
They make it look so dang easy.. AMAZING work! Kudos to the both of you for thinking of this!!
@fatmamohamed-px1pe
@fatmamohamed-px1pe 3 года назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Nl3R_iz6F-I.html...
@jemimaking1257
@jemimaking1257 3 года назад
This is one of the best recommendations on RU-vid. I bet you didn't search for this. I mean c'mon this is brilliant.
@CastielBlack
@CastielBlack 3 года назад
Would it be possible for you guys to custom make one for me? Do you accept this sort of request? I am looking for a cutting board at the moment and I love your work! What you did was amazing and recycling the plastic like this is great!
@andreavera2069
@andreavera2069 3 года назад
I did look up for ways to recycle and upcycle plastics and YES THIS IS BRILLIANT !!!!
@BrothersMake
@BrothersMake 3 года назад
Thanks so much! And I'm afraid we're not currently selling our products, however we're looking to start at some point in the near future. So keep an eye out on our Instagram and we'll be sure to let everyone know when we do 😊🤙🏼
@8schopra
@8schopra 3 года назад
Agreeed.💚👍👍👍
@priyajain7475
@priyajain7475 3 года назад
No need to make....but these people need our appreciation....these projects are already running on large scale world wide....all we need is just purchase these products to support them and that's how we can help them to make our Earth Clean from plastic garbage....
@nefertitiben
@nefertitiben 3 года назад
Me: (sees the thumbnails) plastic bottle caps! That should be easy! Me: (sees his workshop and tools) never mind..
@prima808
@prima808 3 года назад
😂😂Same!
@SONALI_V
@SONALI_V 3 года назад
Lol same
@BrothersMake
@BrothersMake 3 года назад
We bought our sandwich press in a charity shop for £3 and the bottle jack press we built ourselves! Start small, but second hand and borrow from family/friends and your collection will soon grow!
@lowlight1063
@lowlight1063 3 года назад
well that is NOT "how to make" that is just a process shown
@goodconnection69
@goodconnection69 3 года назад
@@lowlight1063 not so hard to figure it out from the vid I think.. but you are kind of right in your way
@gerilynne1955
@gerilynne1955 2 года назад
I have a rubbermaid cutting board from around 1977. I was thrilled to find another in a garage sale. I will never part with either one. They remind me very much of the cutting board you made. Same style, only smaller. Anyone who is lucky enough to get this cutting board from you will be very lucky if it's anything like mine. Washes great. It is easy to sanitize and is wonderful to cut on. Thanks for showing us this.
@dxxy
@dxxy 3 года назад
I would love to make this but I don't have the equipments lol
@juliaelizabeth2028
@juliaelizabeth2028 3 года назад
Same. So many tools are needed!!!
@wiqoyahsuhailiyah5412
@wiqoyahsuhailiyah5412 3 года назад
So do i :'(
@rfabry777
@rfabry777 3 года назад
Same.. 😖😖
@BrothersMake
@BrothersMake 3 года назад
We bought our sandwich press in a charity shop for £3 and the bottle jack press we built ourselves! Start small, but second hand and borrow from family/friends and your collection will soon grow!
@feliciaaudry1748
@feliciaaudry1748 3 года назад
Agree!! :(
@ladybug1822
@ladybug1822 3 года назад
Dude you should really think about selling some of your products I would love to buy recycled items
@BrothersMake
@BrothersMake 3 года назад
Thank you! We are thinking along these lines for the future!
@fthurman
@fthurman 3 года назад
@@BrothersMake if you'd like some input on what folks would like to buy, I'd love a recycled HDPE clipboard. I'm a teacher, and I love using one to be able to write when I'm standing up.
@curbotize
@curbotize 3 года назад
I'll second or third that. These are really cool. I could use a cutting board or a clipboard. You can make those infinity wallets. Pen blanks. Sooo many things. I'd definitely buy stuff.
@BrothersMake
@BrothersMake 3 года назад
Awesome idea!
@emanuelebela299
@emanuelebela299 3 года назад
@@fthurman You should check the Precious Plastic bazar ;)
@MommyOfZoeAndLiam
@MommyOfZoeAndLiam Год назад
I really appreciate the fact that you collect all the bits you can for remelting and aren't just making piles of plastic sawdust to be disposed of.
@Thoron_of_Neto
@Thoron_of_Neto 2 года назад
This video makes me miss my shop man. In college I collected all the HDPE2 I could get my mits on. I made everything from a jointers mallet to doorstops out of that stuff to sell to make a little extra money. This is a great video!
@eppyminecart7319
@eppyminecart7319 3 года назад
When that plastic is melted all I could think of was "forbidden hard candy"
@CodexIvory
@CodexIvory 3 года назад
That's exactly what I thought! Forbidden hard candy
@afreenahmed7401
@afreenahmed7401 3 года назад
Plastics recycled rather than just being garbage . How else you can serve the world better than this ? Love you guys. Start selling please would love to buy your all products.
@BrothersMake
@BrothersMake 3 года назад
Thank you so much!
@KLeaTHeR
@KLeaTHeR 3 года назад
Actually recycle means turning garbage into something useful. The effort you give and time you give or the resources you are using (electricity, heat, gas etc.) must not be more than you cycled. Simply math. If you use too many electricity just to make simple plastic board it might harm world more than plastic garbage. Which is why there are factories and recycling cans around. They are ..... yea whatever. Good job ^^
@afreenahmed7401
@afreenahmed7401 3 года назад
@@KLeaTHeR i think rather than just turning negative we must learn to appreciate. Using electricity to produce something out of waste is completely acceptable.
@KLeaTHeR
@KLeaTHeR 3 года назад
@@afreenahmed7401 I just calculated my effort to type here and tought it was waste and stopped. So I suggest same for u
@afreenahmed7401
@afreenahmed7401 3 года назад
@@KLeaTHeR what is free is worthless. So i hope you keep you free suggestions with yourself :)
@tanisha4502
@tanisha4502 3 года назад
From a long time ago I've been collecting,plastic material that goes into waste, but I've just made a pile of them,yet I couldn't find the perfect thing, I was really excited when I saw this,though I don't have the materials,but still the work you've done is really inspiring for me,you guys are doing great!good luck,I hope these act encourage others too.fighting!
@BrothersMake
@BrothersMake 3 года назад
That’s awesome! Definitely give it a go!
@tanisha4502
@tanisha4502 3 года назад
@@BrothersMake thanks, I'll try my best ☺️
@tanisha4502
@tanisha4502 3 года назад
@@BrothersMake thanks, I'll try my best ☺️
@Braddy_Daddy
@Braddy_Daddy 2 года назад
Never thought of plastic as a viable medium to work with but y’all proved me wrong! Love the board
@BrothersMake
@BrothersMake 2 года назад
Thanks!
@haggly8679
@haggly8679 3 года назад
Imagine countertops made out of this material! It would be like a less expensive colourful marble.
@yasminelouati4416
@yasminelouati4416 3 года назад
You forget and put a hot pot on it and there goes your counter
@BrothersMake
@BrothersMake 3 года назад
That would look so rad!
@kateherr2893
@kateherr2893 3 года назад
@@yasminelouati4416 once someone figures out the right kind of top-coat we're set
@yasminelouati4416
@yasminelouati4416 3 года назад
@@kateherr2893 in that case it would be so dope
@mimikai6808
@mimikai6808 3 года назад
@@yasminelouati4416 well a lot of people have plastic counter tops that melts or burn if it comes in contact with a hot pot. Also, wood counters tips are on the opposite extremely sensitive to water, meaning you have to be super vigilant when you're cooking to not let water sit on the surface for more than like 30 minutes ish. But I agree with you, with the right coat, it would be dope
@julianvilla6126
@julianvilla6126 3 года назад
Ngl when I first saw the thumbnail, I thought ya'll we're gonna turn the caps into apple slices 😂
@BrothersMake
@BrothersMake 3 года назад
😂🤦🏻‍♂️
@apaarkhare
@apaarkhare 3 года назад
Same😂
@erikakurniatan4181
@erikakurniatan4181 3 года назад
Relate 😂😂
@RizalBudiLeksono
@RizalBudiLeksono 3 года назад
Same
@janabroflovski2572
@janabroflovski2572 3 года назад
SAME HAHHA
@chefevans5705
@chefevans5705 2 года назад
Excellent old-school carpentry work. Love the customs jigs etc. used in the video. Bravo!
@alexanderattaie
@alexanderattaie 2 месяца назад
I love how you sanded everything twice
@ami9486
@ami9486 3 года назад
😍 wouldn’t it be nice if people drop off their plastic waste to organizations the make products like this!
@BrothersMake
@BrothersMake 3 года назад
Definitely!
@daltonx6177
@daltonx6177 3 года назад
Yeah sure... Spending 3 or 4 hours to create this, using a workshop worth at least $5000. and sell the boards for 10 bucks ! You guys are not very good in math, hey ?
@jmassagetherapist6773
@jmassagetherapist6773 3 года назад
@@dawnpaoloabes8441 do you drink out of a plastic bottle? Or eat out of plastic bins? What about styrofoam for take out?
@fatiheroglu9842
@fatiheroglu9842 3 года назад
@@daltonx6177 dude you'd only need to buy drill bits for sanding and another for polishing its literally not that expensive to make
@fatmamohamed-px1pe
@fatmamohamed-px1pe 3 года назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Nl3R_iz6F-I.html..
@marat.8853
@marat.8853 3 года назад
You could open a store with objects like this. They're very practical and look cool so it would encourage people to recycle more!
@debbiefinney5779
@debbiefinney5779 3 года назад
Plus with a store have a recycle drop off for lids and bottles ...wow
@Leicht_Sinn
@Leicht_Sinn 2 года назад
But it is really inefficent and only really small valume
@brianlevine249
@brianlevine249 2 года назад
@@Leicht_Sinn Exactly. Be far better for the environment to just send those caps to a large scale recycler and he can buy recycled plastic
@loualex6925
@loualex6925 Год назад
But recycling plastic are not food safety
@Rumade
@Rumade 3 года назад
A really interesting concept! Years and years ago I saw a dude on telly make a whole bath using recycled plastic in a similar way. I'd love to see this technique used for making larger pieces, like the top of a console table.
@BrothersMake
@BrothersMake 3 года назад
We plan to make bigger items this year! Stay tuned
@maielim3844
@maielim3844 Год назад
most beautiful cutting board I've ever seen
@BrothersMake
@BrothersMake Год назад
Thank you so much 😊
@catherinesucher3308
@catherinesucher3308 3 года назад
I feel so stupid I looked at the thumbnail for like 30 seconds being like “how did they make bottle caps into apple slices..?” Smfh
@BrothersMake
@BrothersMake 3 года назад
😂😂
@abigailcontreras1741
@abigailcontreras1741 3 года назад
Me when I saw the thumbnail lmao
@arti4041
@arti4041 3 года назад
Ha ha ha...hillarious
@kamallb4650
@kamallb4650 3 года назад
Omg same😂
@lostandthrown3137
@lostandthrown3137 3 года назад
Now I don't feel so alone in this whole planet😂😂😂😂
@garagemonkeysan
@garagemonkeysan 3 года назад
You guys are great. Love seeing people reusing, repurposing, upcycling. Mahalo for sharing! : )
@BrothersMake
@BrothersMake 3 года назад
Thank you dude!
@pierreblais8269
@pierreblais8269 7 месяцев назад
I have been looking for a while for an idea of something to do with residential plastic waste, we have so much…this idea is genius. You can even sale it!!!
@walterblanc9708
@walterblanc9708 3 года назад
I cant make the chopping board due to lack of tools but it has given me a few ideas for less refined and finished things. Very interesting thanks.
@ijessup
@ijessup 3 года назад
that’s a damn fine looking cutting board 🖤🖤🖤
@BrothersMake
@BrothersMake 3 года назад
Thank you kindly 😊
@airwolfie100
@airwolfie100 3 года назад
I truly is, I’d like it bigger though!😁
@georgecarlinn6288
@georgecarlinn6288 3 года назад
Plastic recycling toxic get natural wood board
@RobMacKendrick
@RobMacKendrick 3 года назад
@@georgecarlinn6288 You didn't read the video description.
@georgecarlinn6288
@georgecarlinn6288 3 года назад
@@RobMacKendrick yeah still any kind,even food grade plastic is going release bi pHenols, even if under limits, why go through this DIY process when wood is natural safe easily available, the sharp knife on this board over a period is going to release small particles of plastic, what an headache, same with wood too but that wouldn't be toxic atleast
@lukeives3676
@lukeives3676 3 года назад
Just watched this video, first time I've seen any of your videos. Absolutely cracking mate. Think what your doing is great, turning waste into something usable, helping the environment by recycling what would have ended in landfill. Absolute art the way it turned out.
@BrothersMake
@BrothersMake 3 года назад
Thank you so much for watching and recognising our work! 🤙🏽🤩
@jillywells1232
@jillywells1232 2 года назад
When I first started watching this I thought seriously - why? However, at the end of the video I got my answer. WOW!!!! It's amazing plus some, thank you for sharing and I have subscribed and rung the bell - this is simply beautiful. Thank you for sharing. 💙💙💙
@noeliagarcia8642
@noeliagarcia8642 3 года назад
*Looks at her boxes of scrap PLA filament from 3D printing* .... ooohhh... maybe not a chopping board, but some cute coasters or something. Loved the vid!
@BrothersMake
@BrothersMake 3 года назад
Thanks 🤙🏼
@sakshi8664
@sakshi8664 3 года назад
We need more people like you in this polluted world. Kudos to you dude
@muhammedeminaktas3482
@muhammedeminaktas3482 Год назад
Türk müsün?
@enosunim
@enosunim Год назад
You just do not imagine how much electricity it took to create this board. And guess how this connects to pollution? If you want less pollution you should stop using electricity. NOW! = )
@VidarrKerr
@VidarrKerr Год назад
@@enosunim I know right. You want an eco cutting board, chop your food on a piece of wood (old school), or recycled glass, or a stone tile. Looks cool though.
@X3WorkshopDesigns
@X3WorkshopDesigns 3 года назад
OH WOW!!! That was so genius on how you used the aluminum angles to route out the juice groove. I'm definitely using that trick. The board came out great fellas.
@BrothersMake
@BrothersMake 3 года назад
Thanks so much dude 🤙🏽
@theshypersistence
@theshypersistence 3 года назад
Juice groove. Is that what it is. I thought it was purely decorative 🙈😂
@MakerCuisine
@MakerCuisine 3 года назад
The cutting came out great, love how you upcycled bottle caps to make the cutting, truly amazing
@BrothersMake
@BrothersMake 3 года назад
Thank you!
@CesarCordova
@CesarCordova 3 года назад
Lol, I thought he would make apples out of bottle caps.
@nshihra
@nshihra 2 года назад
Thank god, I am not the only one.
@cookiedxstinyd6107
@cookiedxstinyd6107 2 года назад
This is very, very stupid of you to think something like this.
@MickeyGee73
@MickeyGee73 2 года назад
Me too! 😂
@AJ112
@AJ112 2 года назад
Same bro
@docedcrib9079
@docedcrib9079 2 года назад
Same lol i was like wtf
@giangstr
@giangstr 3 года назад
Does this release any toxic fumes when you melt the plastic? Otherwise it looks amazing
@BrothersMake
@BrothersMake 3 года назад
Thanks! And no HDPE doesn't give off any fumes when melting so long as you don't burn it - we tend to melt it at around 150-160 degrees celcius, the burning point is around 180 👌🏼
@prussiangreen6940
@prussiangreen6940 3 года назад
Brothers Make thanks for clarifying. It actually got me worried 🤣
@blessings5735
@blessings5735 3 года назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_vJB5yRMTgg.html
@anetteseip8757
@anetteseip8757 3 года назад
I was wondering about the same and If there is toxic in the plastic that could get into food?
@giangstr
@giangstr 3 года назад
@@anetteseip8757 Especially if you put something hot on top of it, etc. like before you slice into it, or etc.
@simon4043
@simon4043 3 года назад
Beautiful. I'd be saying to my wife "don't you dare use a knife on that"
@BrothersMake
@BrothersMake 3 года назад
Haha!
@priscillajimenez27
@priscillajimenez27 3 года назад
Right!
@axelknutt5065
@axelknutt5065 3 года назад
Yeah I was thinking the same ... but then when he used the heat gun to patch the imperfection, I thought ‘that’s so obvious to repair the cuts in the plastic cutting boards we already have’. Great video too guys.
@Katlick
@Katlick 6 месяцев назад
Awesome now all I need is a tutorial on how to set up a workshop like this
@Nekokratic
@Nekokratic 3 года назад
this is so satisfying to watch, specially watching caps that are normally thrown away to be reused in such a way. Thank you for showing us the process!! It's very satisfying and great to watch :D
@BrothersMake
@BrothersMake 3 года назад
We're so glad you enjoyed the video - thanks for your comment! 😊 💚
@freespirited3557
@freespirited3557 3 года назад
I don't know what to say.. this is the most creative, innovative and finest cutting board I have ever seen in my life!
@blessings5735
@blessings5735 3 года назад
It's mind blowing. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_vJB5yRMTgg.html
@crystalsomekat7172
@crystalsomekat7172 3 года назад
I am amazed - - creating something beautiful out of plastic that will end up in a landfill or ocean. Tremendous!!! 🙌
@BrothersMake
@BrothersMake 3 года назад
Thanks for the kind words Crystal! 😊
@DMSteeley
@DMSteeley 2 года назад
I found a kid on here a while back that did this kinda stuff with a regular toaster oven, a pair of gloves, and some woodworking tools.
@user-dl4jo4kn5u
@user-dl4jo4kn5u Год назад
Вообще-то шикарный материал, с такой тщательной обработкой он достоин стать бижутерией.
@javalangerrorusernameisnot8406
@javalangerrorusernameisnot8406 3 года назад
One recomendation. You have to use a epoxi or varnish coat compatible with food (no toxic) When you cut food with the time you could have a small toxic plastic particles and that's no good :S Wihtout this, very very good work, congratulations.
@trailtrashoutdoors8173
@trailtrashoutdoors8173 3 года назад
I like how all the shavings and trimmings can be used to make other things in future projects! Way to set the bar!
@BrothersMake
@BrothersMake 3 года назад
For sure!! Thanks
@johnadkins5918
@johnadkins5918 3 года назад
By my estimation that cutting board took about eight hours to make and goodness knows how much energy, if this was how all plastic was up cycled into a usable product we would end unemployment for a start but would need to build a lot of power stations to power the process and after all that we could expect to pay around £200.00 for the privilege of owning an up cycled milk bottle top. Still was a very cool vid to watch and it did look nice.
@BrothersMake
@BrothersMake 3 года назад
15-20hours actually. Not viable to sell in this current setup but that’s not the point of this video.
@walterblanc9708
@walterblanc9708 3 года назад
If I ever get those lovely powertools maybe I will have a go.
@rosemaries69
@rosemaries69 3 года назад
I hope your lungs are fine after melting all this plastic. Excellent job.
@arisweets5657
@arisweets5657 3 года назад
He’s probably wearing safety equipment
@Loyannelima
@Loyannelima 3 года назад
the lids of the bottles won't affect your lungs whether you melt them in low temperatures
@jhsevs
@jhsevs 2 года назад
HDPE is nontoxic 😊
@saranyas6280
@saranyas6280 2 года назад
This RU-vid is such a stupid to melt plastic
@saranyas6280
@saranyas6280 2 года назад
@@Loyannelima but cutting vegetables on them will lead to small plastic particles going into body. Apply sense
@FigmentsMade
@FigmentsMade 3 года назад
So very pretty! And useful! And that was an excellent tip for how to deal with bubbles.
@BrothersMake
@BrothersMake 3 года назад
Thanks Sharon! You should try this out
@SharaMiranda
@SharaMiranda 3 года назад
Ya tengo las ganas, ahora sólo me falta TODO LO DEMÁS! excelente trabajo 😻
@user-pi8vt7ut3n
@user-pi8vt7ut3n 2 года назад
...пока будешь искать всё остальное, пропадёт желание!!!
@4mverajose128
@4mverajose128 Год назад
XD?
@benjamin_b929
@benjamin_b929 2 года назад
Didn’t think it was possible to make apples from plastic, but clearly you have proven me wrong
@helena_barceloshp
@helena_barceloshp 3 года назад
Bah que legal esse trabalho! Ficou lindo! Ótima forma de reciclar! Parabéns!👏👏👏👏
@raylaiwin7457
@raylaiwin7457 3 года назад
See title , omg, im so excited to learn and try it out, recycle got a new meaning!! . Few minutes into the video , nevermind ~~
@janani11
@janani11 3 года назад
I don't even cut vegetables but I feel like buying it.. lol 😆
@user-pv8ov1kp5h
@user-pv8ov1kp5h 3 месяца назад
Дружище привет хочу сказать ты большой молодец очень красивая доска у тебя получилась ты меня вдохновил мне тоже захотелось после твоего видео сделать такую же доску желаю тебе всего хорошего и успехов в творчестве
@DiybyUnclenui
@DiybyUnclenui 3 года назад
♻️♻️♻️ V e r y n i c e ♻️♻️♻️
@BrothersMake
@BrothersMake 3 года назад
T h a n k Y o u !
@BrothersMake
@BrothersMake 3 года назад
Thanks for watching! If you're worried about whether or not HDPE can be used for food use, check out our thoughts in the description 🤙🏽 If you liked the video, let us know! If you disliked it, feel free to let us know that too! See you on the next one ♻️
@eugenetswong
@eugenetswong 3 года назад
Thanks for the info in the description. Our milk bottle caps don't have a #2 recycling symbol. Are you confident enough, by any chance, that all milk bottle caps are #2? By the way, how do you thoroughly wash the plastic of food residues? Just hand wash the way that you wash your dishes?
@IsaKocoglu
@IsaKocoglu 3 года назад
Hello Eugene, if the milk bottle is plastic itself, both the milk bottle and its cap are made out of HDPE. I am not sure about UHT milk carton lids though. I hope that helps? Where do you live? You could send the milk company an email asking what material they use to make their lids? EDIT: By the way, if it is a milk bottle and the milk has not gone rancid, rising it out with water should be sufficient.
@eugenetswong
@eugenetswong 3 года назад
@@IsaKocoglu thank you for all the info. I'm from BC, Canada.
@rman8028
@rman8028 3 года назад
HDPE is food safe. Milk jugs, laundry detergent jugs, and the hated plastic shopping bags. Big Brother is stealing the shopping bag option because 'we' are too lazy to properly recycle them. That's why I'm stockpiling them in 28L hardware store buckets and plastic coffee cans. Now to get my shed decluttered and organized for some making. Yes, I have some cut up milk jugs too. That's why the shed needs organized.
@IsaKocoglu
@IsaKocoglu 3 года назад
@@eugenetswong, you are most welcome. I am sure that Canada would use HDPE for their milk bottles, and bottle caps. I am from Australia, and we use HDPE for all our milk bottles. Just the UHT milk cartons' lids, I am not sure about. Also, the HDPE bottles are never clear like PET bottles. PET bottles are the clear ones that Coca Cola, Pepsi, and the sort use to bottle their beverages. Mind you, they are low opacity, but not totally clear, like a glass bottle would be. I hope that makes things clearer.
@Dragionex29
@Dragionex29 Год назад
This is amazing work and love how you used non toxic materials to make this!
@kindercannon2280
@kindercannon2280 11 месяцев назад
Plastics are non toxic?😂
@Dragionex29
@Dragionex29 11 месяцев назад
@@kindercannon2280 🙄 did you not read anything? HDPE plastics are nontoxic
@kindercannon2280
@kindercannon2280 11 месяцев назад
@@Dragionex29 “There is evidence indicating that phthalates can leach from PET and HDPE bottles into their contents.” I have a high degree of uncertainty to any claims that ANY plastic is completely non-toxic. www.ncbi.nlm.nih.gov/pmc/articles/PMC5848201/#:~:text=Different%20kinds%20of%20acidic%20liquids,HDPE%20bottles%20into%20their%20contents.
@Dragionex29
@Dragionex29 11 месяцев назад
@@kindercannon2280 yeah I read that too 🤦‍♀️😂 but he made a cutting board out of it. They're referring to drink bottles sitting out in heat, somewhat, hoping to warn others the damage it can cause due to it leaking inside the bottle. But ur not wrong!
@shafirar.a.m.4415
@shafirar.a.m.4415 3 года назад
I'm getting dizzy just imagining the smell of burning plastic. You sir, are a sorcerer.
@BrothersMake
@BrothersMake 3 года назад
We never burn plastic!
@jessamyletirshathaapostol3786
@jessamyletirshathaapostol3786 3 года назад
When people nowadays are so creative and talented and a crafty genius...amazing...i do wish i have that skill of creativity too...haha..God is trully amazing for giving you this gift...amazing...
@BrothersMake
@BrothersMake 3 года назад
Thank you!
@bluestar3642
@bluestar3642 3 года назад
How many of you thought this RU-vidr is converting bottle caps into apple slices
@poonamshinde9597
@poonamshinde9597 3 года назад
For a sec my mind went there 😂
@blessings5735
@blessings5735 3 года назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_vJB5yRMTgg.html
@elainebrill1909
@elainebrill1909 2 года назад
Absolutly awesome. A lot of tools and a lot of work. Not for everyone, but @ true work of art. What beautiful cabinet doors they would makr. ❤
@plasticman3952
@plasticman3952 2 года назад
Reusing the same plastic over and over will make your parts brittle. even soft plastics like LDPE and HDPE. 42 years in the plastic industry as a hands-on plastic process engineer gave me great knowledge of plastic processes and their limitations.
@simonr6793
@simonr6793 3 года назад
This channel is quickly becoming known as the HDPE goto channel, before we know it you're going to be turning this stuff into the wire for using on 3D printer's etc 😀 👍.
@BrothersMake
@BrothersMake 3 года назад
Haha! I think that’s entirely possible. Although not sure HDPE is well suited for filament. May be wrong there though
@simonr6793
@simonr6793 3 года назад
@@BrothersMake you never know until you try!!
@BobSmith42
@BobSmith42 3 года назад
Plastic for 3D printers needs to flow really well and cool down really fast. I don't think HDPE does either of those.
@ran_dom4753
@ran_dom4753 3 года назад
i thought it was about how to transform plastic caps to sliced apples-
@acrinamaria488
@acrinamaria488 3 года назад
Same😂
@blessings5735
@blessings5735 3 года назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_vJB5yRMTgg.html
@blessings5735
@blessings5735 3 года назад
Same lol
@carolgomez189
@carolgomez189 2 года назад
Me imagino que ya las están comercializando porque con toda esa herramienta es posible... 👏👏👏
@Setekh..
@Setekh.. Год назад
素敵!! ボトルキャップの色を選んでミックスさせれば豊富なマーブル模様が生み出せそう!!
@omkharde2325
@omkharde2325 3 года назад
Who needs 3d printer if you have ability to recycle and make
@perlav-lara7897
@perlav-lara7897 3 года назад
Hear me out - they make 3D printer filament with only recycled plastic and let it be marbled too or whatever and sell it - best of both worlds and it makes the manufacturing process a lot faster and less labor intensive
@g.g.2102
@g.g.2102 3 года назад
I’m ready to buy it. It’s beautiful!
@daviddickson1567
@daviddickson1567 7 месяцев назад
Thank you for uploading this video clip looks awesome Florida USA 😊Culinary Chef 👍👍🙏🙏
@alihabash3549
@alihabash3549 3 года назад
يا ليت وطننا العربي ايضا ان يهتم باعادة التدوير ، وحجم التلوث البيئي الناتج عن مخلفات البشر واعمال البشر مبدع ، داوم على عملك المنقذ للبيئة والجميل
@user-fg6hg7ds1v
@user-fg6hg7ds1v 3 года назад
You guys should take donations from people’s recycling and make these for commission !!
@katerose0211
@katerose0211 3 года назад
Yeah definitely i would donate. I would like one of these and knowing its not going into the landfill is awesome.
@samantha4130
@samantha4130 3 года назад
Dedication! That wasn’t a quick and easy process. Love the end result.
@BrothersMake
@BrothersMake 3 года назад
Nope! But worth it
@ArDeeMee
@ArDeeMee 2 года назад
@@BrothersMake How long did this particular project take?
@almavalquiria7010
@almavalquiria7010 3 года назад
Que trabalho lindo! Um material que seria descartado prejudicando a natureza tão bem aproveitado. Parabéns!
@user-ef8vu3qj3s
@user-ef8vu3qj3s 3 года назад
Цена такой доски из вторичного материала улетает в космос.
@radiance_art
@radiance_art 3 года назад
i thought the thumbnail meant turning a knife into apple slices 😂😂😂😂😂😂
@badhonebrahim7707
@badhonebrahim7707 3 года назад
make an ipad pro 12.9' cover, that would be great.
@Igor_Toropov
@Igor_Toropov Год назад
В деревянной форме для пластика не меньше красоты и труда, чем в самом изделии из пластика
@mahjabibano8950
@mahjabibano8950 3 года назад
Best plastic recycling idea, it can save trees
@BrothersMake
@BrothersMake 3 года назад
Thanks!
@sugmagaming7665
@sugmagaming7665 3 года назад
I love watching stuff I can't make.
@talilkr5238
@talilkr5238 3 года назад
awesome, love renewable stuffs. Keep it up.
@BrothersMake
@BrothersMake 3 года назад
Thanks!!
@jaydiarae
@jaydiarae 3 года назад
From trash to treasure. Truly a work of art!
@BrothersMake
@BrothersMake 3 года назад
Thank you!!
@balford2112
@balford2112 3 года назад
Awesome up cycling! I don't have a tools to make such a finished piece but I would buy this board.
@BrothersMake
@BrothersMake 3 года назад
Thank you!
@nebulawallpaper8064
@nebulawallpaper8064 3 года назад
INCREIBLE, ME ENCANTA
@itssanasss
@itssanasss 3 года назад
Me Looking Thumbnail : "Yes😀 I can make it👍...." BUT.. After Full Video : "Ok i will buy it from the market 🤗😌😌"
@Tattman-cn5wv
@Tattman-cn5wv Год назад
When ever someone says they can do it themselves. I doubt they have all of these tools. Great video
@bobongbmx
@bobongbmx 18 дней назад
amazing and brilliant idea!
@darksunedits4790
@darksunedits4790 3 года назад
Please be safe while doing these Appreciated ur hardwork
@BrothersMake
@BrothersMake 3 года назад
HDPE is safe to melt as long as you stick to specific temperature. And thanks!
@davidrabillard9620
@davidrabillard9620 2 года назад
This is such a great idea. I've been thinking about starting a plastic recycled utility business. How much would you say is required to get started, all equipment included?
@nobel87able
@nobel87able 2 года назад
I don't know about the price in your region but in indonesia, it cost about 200 million (+- 170 hundred US dollar) for the equipment such as extruder, pressing machine etc, notincluded safety prop (gas mask etc) and land and building cost but if you like us who build it in garage, well the cost should be minimum.
@FerniSh-hk8qk
@FerniSh-hk8qk 3 года назад
Sos un crack hermano. Saludos desde Argentina. Te deseo lo mejor
@rajmishra6189
@rajmishra6189 3 года назад
This is just brilliant. Such Innovations are the need of the hour. Kudos guys. 👍🏼
@BrothersMake
@BrothersMake 3 года назад
Thanks so much, Raj!
@rajmishra6189
@rajmishra6189 3 года назад
@@BrothersMake Looking forward to more such videos and probably with easily feasible tools. 😂❤️
@aartishirate25
@aartishirate25 3 года назад
I love your content. It's very thoughtful of you to do this and actually use them. Do you have a store we can buy these stuff off of? If yes, it'd be so awesome ❤️
@BrothersMake
@BrothersMake 3 года назад
Thank you! www.brothersmake.com/shop
@wayward_dom6865
@wayward_dom6865 3 года назад
Awesome work dudes. Top tip with the air bubble issue 👍😁♻️
@BrothersMake
@BrothersMake 3 года назад
Thanks man!
@MicaRayan
@MicaRayan 3 года назад
Brilliant upcycling. Make sure you execute the job within areas full of wall openings, good ventalition is needed, just like drawing with oil painting
@hihogandalfaway
@hihogandalfaway 3 года назад
Me: cool recycling :) My brain: hhnnnggg goop
@bbqemcasa
@bbqemcasa 3 года назад
Great idea!
@FGUK1973
@FGUK1973 3 года назад
That looked Amazing!! How much plastic did you need for this as I would like to make my own one for myself? 10/10 guys!!!
@timbucktoos6093
@timbucktoos6093 2 года назад
Interesting video! Very informative description! Good looking product!Hope you get good sales from customers with brains!
@zephyrdrake_
@zephyrdrake_ 3 года назад
Very easy to make, all you need is highly specific and custom equipment.
@BrothersMake
@BrothersMake 3 года назад
The key things you need is a way to heat plastic and a way to clamp it. Our panini press was £3 from a charity shop and we built the press ourselves. There’s more than one way to skin a cat - we showed you one way of doing it, there are many!
@lucasdelpino5115
@lucasdelpino5115 3 года назад
This is a good idea guys! It is ok when you made your own cutting boards for food at home, you are free to do what ever you want. But in plastic industry when you speak of food contacts products, it means plastics who are going to be used in food industry or cooking, the plastics materials used or piece made (example cutting boards) have to respect standards of food contacts and it is even more strict if you use 100% recycled plastics. Not a lot of companies have the process to create food contact recycled plastics materials because it expensive and long process. It's a shame to be locked that much but regarding the health of people in food industry it is way too important. Nice job of conception 👍
@BrothersMake
@BrothersMake 3 года назад
Luckily, we aren’t making these at industry level. But if you want to hear our thoughts on food safety you can check the description 🤙🏽
@WandererASMR
@WandererASMR 3 года назад
Beautiful, extremely beautiful
@BrothersMake
@BrothersMake 3 года назад
Thank you!
@elmyra.jackson
@elmyra.jackson 3 года назад
Wow,excellent job!! What a beautiful cutting board!!
@BrothersMake
@BrothersMake 2 года назад
Thank you!
@rjtentertainment2837
@rjtentertainment2837 9 месяцев назад
It's really inspire the children to collect plastic and they were interested to do like this
Далее
ДЕНЬ РОЖДЕНИЯ БАБУШКИ #shorts
00:19
Plant Pots made from Recycled Plastic
4:53
Просмотров 1,4 млн
New Stool from Old Trash
10:50
Просмотров 1,4 млн
What to do with all that 3D printing WASTE?
8:16
Просмотров 43 тыс.
Extrude beams from plastic waste #preciousplastic
9:44
Is a PLASTIC knife actually any good?
11:16
Просмотров 537 тыс.