Cutting Designs Bigger than Your Laser!

Подписаться 10 тыс.

Просмотров 9 тыс.

50% 1

This method works for engraving too!
👀 Free Reference Guide mentioned in the video! 👀
If you're subscribed to my newsletter you should already have this file waiting in your email inbox! If not, sign up using this link: letsmakeathing.com/pnc-refere...
⚡With Laser Learning:Diode Edition you will learn everything you need to set up your new laser, and get started engraving and cutting unique projects in less than a day!
letsmakeathing.com/llde4
*Grab it now, price is going up soon!*
If you buy using my links below, I may get small share of the sale.
Longer B1 40 Watt Laser Engraver/Cutter:
amzn.to/3IbfEUW
My Longer B1 Laser Review: • Solid Laser...Once You...
PPE: OD 6+ Laser Safety Glasses: amzn.to/43nTiYt
Twotrees Laser Engraver Enclosure: amzn.to/3P9BeMG
Follow me on social media:
👉Facebook Group: / letsmakeathing
Disclaimer: The content presented in this video is for entertainment purposes only. The information provided is not intended to substitute or replace professional advice, and viewers should not rely solely on the information presented in this video. Viewers should always do their own research and consult with professionals in the appropriate fields before making any decisions based on the information presented. The creator of this video does not guarantee the accuracy, completeness, or usefulness of any information presented in this video.
#diy #Making #Longer #LongerB1 #LaserEngraver #LaserEngraving #LaserBusiness

Опубликовано:

3 сен 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 46

@LetsMakeAThing 10 месяцев назад

If you have other topics you'd like me to cover in future videos leave me a comment!

@OMagodasRespostas Месяц назад

Ola boa noite?? O meu recorte fica cerca de 1mm fora se "se nao escalar" e quando coloco para "escalar" sai cerca de 0,5 mm. Sabe o que poderia ser??

@Guitar_335 Месяц назад

Thank you for this video! I've been trying to help my dad (who is a beginner with LightBurn) figure out how to do exactly this! He had been struggling for a while and after I watched this video, I was able to set up a project with target points and it came out perfectly!

@LetsMakeAThing Месяц назад

Glad I could help!

@NegativeYoutube 8 дней назад

Thanks. This took me a couple tries to really understand the logistics of the process, but now I'm confident I can pull this off in the future with no problems. Good explanation.

@LetsMakeAThing 8 дней назад

Glad it helped!

@Dancopymus Месяц назад

Although it is a little difficult, you explained the subject very well. Thanks.

@LetsMakeAThing Месяц назад

Thank you!

@buxtor Месяц назад

03:10 I was today years old!

@dwwoodbuilds 10 месяцев назад

Very useful video!! Really appreciate the level of detail you show! Thank you!

@LetsMakeAThing 10 месяцев назад

Glad it was helpful!

@gokhankomurgoz9166 3 месяца назад

thank you curtis

@LetsMakeAThing 3 месяца назад

Hope you found it useful!

@51watty 9 месяцев назад

Thanks Curtis. As always, helpful and informative.

@LetsMakeAThing 9 месяцев назад

Glad it was helpful!

@stefano.modena 10 месяцев назад

Congratulations for the video, it was very useful, thank you!

@LetsMakeAThing 10 месяцев назад

Glad it was helpful!

@haxensalat 9 месяцев назад

Thanks for this very helpful video, I did not know this function.

@LetsMakeAThing 9 месяцев назад

Happy to help!

@donm1025 10 месяцев назад

Nice job...I wouldn't want to do this all the time but it's great to see that it can be done. I'm a newbie with a new machine and just learning lightburn too!.

@LetsMakeAThing 10 месяцев назад

Thank you!

@jackfitzgerald6927 10 месяцев назад

I got my email already. This is so cool and great.

@LetsMakeAThing 10 месяцев назад

Awesome! Hope you find it useful!

@steven67856 10 месяцев назад

Hi Curtis as usual your video was informative I can use this to print parts on three and 4 feet balsa wood for my model aircraft. Steven.

@LetsMakeAThing 10 месяцев назад

Awesome! Glad it was helpful!

@GIMMICKARTAS 2 месяца назад

Gracias por compartir tus conocimientos, esto hace que todos avancemos. Tengo una pregunta... Para que sirve el invento que has fabricado?

@LetsMakeAThing 2 месяца назад

It's a pendulum for a wooden clock I have plans for.

@d.-_-b 10 месяцев назад

don't wanna be picky but instead of saving the files as separate names, you could just click on the bottom bit and click on a layer at the bottom to swap it to a new one then untick output . then switch layers or configure that layer to what you need , to do the other part . Just feels cleaner to have parts that go together in the same file. especially if they are this simple

@LetsMakeAThing 10 месяцев назад

It may be fixed now, but in the past people had issues trying to do multiple part cuts when everything was in one file. Which is why I put mine in multiple files.

@anetrom 5 месяцев назад

Could you have done this with a previewcamera attached? Or would it not be accurat enough?

@LetsMakeAThing 5 месяцев назад

Honestly, I'm not sure. I don't have a preview camera so I haven't had a chance to test it.

@jimmyz566 5 месяцев назад

What about x and y by moving the machine And leaving piece stationary

@LetsMakeAThing 5 месяцев назад

Good question. You could move the machine and then run the print and cut routine again. You should get the same results.

@juliusmotocikli 20 дней назад

I am also interested in this, how to prepare large drawing to be cut on large plywood sheet. It needs to be cut on x and y axis. I only managed to find instruction on one axis. Actualy I would like to laser cut kayak parts from sheet of plywood with laser cutter that has working area of 600x600mm. If you do this kind of video, I am sure it will be the first on YT. 🙂

@ernestespinosa24 8 месяцев назад

Hello new follower excellent content,I have two questions,can i do this process of the split in multiple cuts for a larger piece?(for example 3,4,5 split parts) and my other question is if the laser set up options have to be user origin ? In order to apply the print and cut or I can do it in absolute coordinates too? Im rookie with the laser machine 😅, thanks!

@LetsMakeAThing 8 месяцев назад

Yes, you can do this with multiple splits. Lightburn will automatically set the origin type when you select print and cut.

@ernestespinosa24 8 месяцев назад

@@LetsMakeAThing thanks 🙏 for your help and knowledge.

@TheFalconJetDriver 10 месяцев назад

Wow I really enjoyed this video short and sweet and right the point with all the necessary details. I learned from this video about cut shapes and separating a part this a new tool for me on LB thank you!!

@LetsMakeAThing 10 месяцев назад

Glad it was helpful!

@robertpoynton9923 10 месяцев назад

Is there a reason for when you click jog to second position its so far off (for me at least) i would have thought that it would be bang on in at least one axis.

@LetsMakeAThing 10 месяцев назад

Try engraving a square and measure the dimensions of the engrave versus the dimensions in Lightburn. If the dimensions are significantly different in one or both axis you may have a belt tension issue with the laser.

@mikeledee8786 3 месяца назад

You say you are using the sandy ply, have you had good luck with cutting as well as engraving? I'm trying to find wood that is close to me for projects that I can use for both cutting out and engraving. Thanks.

@LetsMakeAThing 3 месяца назад

Yes I have had success with cutting and engraving both on the sande ply. For engravings I'm talking surface level marking basically, I haven't tried doing any deep engraves on the plywood.

@mikeledee8786 3 месяца назад

@@LetsMakeAThing thanks

@MarkWarbington 10 месяцев назад

You mentioned that you intentionally placed the crosshairs close to the cut line. Wouldn't it improve accuracy to space the crosshairs as far apart as possible?

@LetsMakeAThing 10 месяцев назад

In all my testing I found I didn't need a ton of distance between the crosshairs to get an accurate alignment. Your mileage may vary though.