Тёмный

Cutting PVC in Half: Tips and Techniques for DIY Enthusiasts 

Staveness Homestead Maker
Подписаться 800
Просмотров 17 тыс.
50% 1

In this video, you'll learn how to cut PVC in half safely and efficiently. Using a round PVC pipe can be tricky, but I've created a jig to hold the pipe in place, so it won't fly out and stab you in the neck. 😝 By following my technique, you'll be able to get the PVC perfectly in half, which I’m using on a fence post that holds wires. This way, I can weed eat around the post without damaging the wires. This tutorial is perfect for DIY enthusiasts who want to learn how to cut PVC in half safely and efficiently.

Хобби

Опубликовано:

 

30 май 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 22   
@ThanhLe-yh1dt
@ThanhLe-yh1dt 10 месяцев назад
Very smart, thank you for your dedication to the community and humanity. !
@frankligas2249
@frankligas2249 Год назад
Thanks for the video. Suggestion: Before you put the hot glue dots onto the jig, you could put a line of masking tape onto the inside of the jig. This will make it easier to remove the pipe from the jig after cutting.
@stavenessstudioshomestead
@stavenessstudioshomestead Год назад
That's a great idea!
@oviecyril6253
@oviecyril6253 2 месяца назад
Thanks for sharing☺
@stavenessstudioshomestead
@stavenessstudioshomestead 2 месяца назад
Absolutely!
@mateopresenta4999
@mateopresenta4999 Год назад
Very Clever Idea! Regards!
@stavenessstudioshomestead
@stavenessstudioshomestead Год назад
Thanks I love creating solutions I just wish they always worked as planned! Haha
@wildwoodtop
@wildwoodtop 10 месяцев назад
Nice work my friend 🍻
@stavenessstudioshomestead
@stavenessstudioshomestead 10 месяцев назад
Thanks 👍
@peterbarlow8912
@peterbarlow8912 Год назад
I had split some 1” schedule 40 shorts to make some curved hose saddles. I just ran some 3/8” bamboo through the PVC and screwed the protruding ends to the side of a 2X block. Set the saw fence checking to make sure the screws are short of the cut line.
@stavenessstudioshomestead
@stavenessstudioshomestead Год назад
That’s a great idea!
@Ledbringer67
@Ledbringer67 3 месяца назад
I have to cut one too, (PVC that is). Thanks - hot glue as a clamp is a good idea!
@stavenessstudioshomestead
@stavenessstudioshomestead 3 месяца назад
That’s great! Glad it helps. 😊
@majidsaeidi7760
@majidsaeidi7760 9 месяцев назад
Perfect
@stavenessstudioshomestead
@stavenessstudioshomestead 9 месяцев назад
Thanks man. Hope it helped
@x21xpress
@x21xpress Год назад
Hot glue tip... I use it extensively too. For removal, a few drops of denatured alcohol (or rubbing alcohol for that matter) will make it easily peel right off quickly and cleanly.
@stavenessstudioshomestead
@stavenessstudioshomestead Год назад
Great tip! I’ll try that!
@porkchop3094
@porkchop3094 Год назад
Genius! Have you though about using strong tape to attach the one half to the jig?🤔
@stavenessstudioshomestead
@stavenessstudioshomestead Год назад
Good idea!
@bobd5119
@bobd5119 Год назад
I can't see a riving knife on your saw. You live dangerously.
@stavenessstudioshomestead
@stavenessstudioshomestead Год назад
I know I had taken it off for a previous project. Can’t believe I missed that.
@mattwiley4530
@mattwiley4530 8 месяцев назад
Why not just glue a piece of wood on the side of the pvc pipe. Don’t net 3 pieces of wood .
Далее
How To Cut Any Pipe Straight - 2022
6:10
Просмотров 85 тыс.
Вы чего бл….🤣🤣🙏🏽🙏🏽🙏🏽
00:18
100 PVC Project Ideas - The Good, The Bad, The Stupid
6:29
How to Easily Cut PVC Pipe by DIYeasycrafts
5:32
Просмотров 137 тыс.
How to mark and cut PVC pipe neat and square
4:55
Просмотров 57 тыс.
A decent idea from an old tire!
9:36
Просмотров 21 тыс.