Cutting The Drip Rails Off Vtuned"s Mustang 

Love the Drip Rail Delete. Yuri you killed it with the welding as usual. Can't wait to see this build progress.

Totally doing this to my '66. I have seen a video on it yet. I agree, that's how it should have been from the factory. Great job doing the work and sharing the video. Thanks!

Nate killed it with the grinder!

Yuri…. Amazing welding. Watching you on your videos teaches me a lot. Do a segment on “how to mig weld”. Drip rail hummmmm. I am old school. I like the rails.

I would love to see Yuri and Nate always working with VTuned. Imagine the banger content and work they would do together. They would high speed cruisin on those built pulling them out in no time jumping from one car to another

GoGo - Tune 83! Awesome teamwork!

Good looking out for your brother, keep you work area clean don't forget vtuned likes it clean

A lot of skillful work to make something unique and you boys killed it. Joe

Freedom helmet and fireworks. . . party time

I love it when Yuri goes into Yurinator mode....💪 and now whe have the Fabu " Nate " tor....

Good clean work . Neat finish and RUST DELETE !!!!

Hi this nikko dizon from the countrt of philippines. I love watching you guys, collaboration of brothers youtuber in building this amazing car, hope to see more videos of you two.. Die hard fan here! 23rd garage, vtuned, & motohead co. 😊

man you bess b helping ,cause its great to see progress . keep going....

Great wk Yuri & Nate it turn out perfect, 👍.

Yuri putting in work

Great work boys!

Looks great without the drip rails. Nice welding see you brought the Miller back out

I am not a fan of cutting of these drip rails, but now it is done it is oke for me, looks more modern but the only risk is when it starts to rain when you are driving and get then out of the car.....Nate did a great job just like Yuri, you Guys are super !

Damn Yuri you killed it bro awesome job.

Its so cool to see you guys working together and the great work.

Yuri and Nate do an awesome job once again 👏

You are King dude. Start your own build. I will be glued to the tube. I like who you are and what you do.

Yuri your real impressive with your skills first class! 💙🏆

Well done Yuri, that was skilfully done... I was also impressed with Nates' cutting abilities...!

It looks better than I thought it would

Looks clean great job

Great to see you guys collaborating on this build.

We need to see the goonzquad boys come down and help you guys out...and vasili too. Now that would be worth seeing

Yur, you got some talent brother! I enjoy watching family work together!!!!!!!!!!!!

love your work bro'...but even better, is working with and for family..

Amazing work Yuri!

Yeah those are rust collectors. But when those cars were made the rest of the car rusted out long before the drip rails. Especially in states that used road salt in the winter time. Great job! Definitely looks better.

I agree, it looks great w/o the rails, nice work, Yuri.

Ben is lucky to have you guys help out with the build,I believe you are giving him opportunity to get other things accomplished.good for you and your brother.keep it up,very commendable for all.great video 👍👍👍😎😎😎

you brothers are so talented!

Love the collaboration of the channels, helping each other.Brings wide variety of content.Thanks for sharing and taking us along

two thumbs up great stuff thanks

That looks great 👍 !

Hi from uk guys👋👍 yuri you do well to just keep zapping and tapping 👌 you have no boundaries to your talent and skills 👍 mustang comingbon thanks to you buzzing all seems man👍 its give ben another boost and soon I think this mustang vendetta hes been on can finally get ticket of the list as completed task 👌 thanks for your time and support to the guys be safe and see you soon👍👋

Funny that in vtuned's channel a lot was worried about the drip rail being deleted while in here everyone loved it gone. the duality of man. And most custom/mod mustangs remove there drip rails.

Pretty work

Looking good

Good job it looks a whole better.. Enjoy your channel I watch all of your brothers channels also.

The Drip Channel delete sure looks good, but if it was done to prevent rust, you have guaranteed that it will rust now, from the burnt inside, unless you can get in there, clean it out and apply some rust preventative.

Excellent welding Yuri, Keep Crushing It!

Removing the drip rail didn't sound like a good idea, but it looks much better. Great job!

You guys are a great example for the younger folks, work hard play hard, that car is going to be a great testament to before and after and watch out for the completed mustang,great team work also👍

Looks sleek 🇺🇸

Nice work on the drip-rail delete. It looks pretty good. Can't wait to see the finished product!! Cheers!!

Yuri, I saw you using that grinder without wearing safety glasses so I’m deducting 3 points off your safety licence! 😊very nice work on Ben’s Mustang I like the way you seem to have each other’s backs. Peace 🖖

Brilliant work as usual, Yuri and Nate you’re a great duo 👍

Another great video and work!

Yuri always kill it well done guys

Love the videos. Good to see you helping others out

Playboy , your shit is on lock...keep shooting for that Milly Mill....you guys are becoming one of my favorite RU-vid channels....it's nice to see you helping out your brother on this build. Much respect playboy and keep grinding...God Bless you and your family..keep them coming.

Fantastic job, man!

Nice work . phenomenal🔥

Defiantly not a bad idea because it turned out great. They really didn't do much for drip protection and with the vent window not really needed because you just open the window. You and your brother would make a great freaking team to pump out crazy one off builds. Never stop dreaming or you'll be stuck in the past. Now you have proof you can do this to other cars 😁 good choice on the music, liked the industrial feel it gave. I did recommended the rail delete 😎 going to do this on my 73 4 door hornet for the exact reason said and seen. Rust gutter and it get up into the roof to cause worse problems. No door electronics to worry about and plan to do other modifications that I also suggested but may of been a little much for the style hes aiming for. Flush mount front and rear would need some work done because the trim hides alot of gap. If you are having to replace a roof or window frame its worth exploring. Customization or modification can't die out and we already lost a generation of coach builders that knew their way around an english wheel.

Down in pigeon forge.. hell of a car show last night. Stay safe and be well. Slava Ukraini

I dont care what they say..That Ruskey Yuri can throw some mean Dimes..

It would be neat to see y'all do a garage tour of different places all over.

Drip rail delete no doubt makes for a clean look, doubtful this will ever be driven in the rain. Yuri you and Nate produced an excellent result, it always amazes me to watch you lay down those perfect welds. Yuri, would you Nate and Ben consider building that C10 shorty you brought to the yard together? The possibilities are endless, bags, frame ,LS, ect. The colab would help all involved, just a thought. Peace.

Nice job 👍

smooth..

🔥

I have seen drip rails removed in sections and while your job turned out fine it is probably a good idea to it in two parts. They cut about 4-inch sections of drip rail leaving 4-inch sections intact. Weld up the newly created gaps then do the same for the remaining sections of drip rail.

Looks good homey.

👌

What a monk job. But result is greater than I thought Yuri.

tnx for the video

Looks slick

Good job Bro Vtuned!

i think it looks great

That weld is so strong Ben don't need no roll cage 💪😁

Nice work … give yuri a booth 🇸🇷

😎 cool

Come on Yuri. You were made for VTuned togetherness. An awesome team in the making. Not to mention the whole family working together, that's great in itself but I think you guys working together makes it that much better. What do you think?

Amazing to work with big brother together and mustang is going to be amazing projekt respekt from 🇦🇱🇽🇰

Good luck when it starts raining cause those drip rails are there for a reason , hope you get really good window seals , good luck

I would suggest putting a disclaimer on some videos where you have this type of welding, reason is that it could cause epileptic fits when seeing that many flashes, I am not affected, but some of your viewers could be, just sayin, trying to look out for your interests. Great content, great music and the welding is superb, Yuri and Nate, you guys are a great team!

Looks OK👍

Don't let him paint it yellow

Drip rail delete👍👌🤑

👍🤞

nice looking work but personally i'd have left the drip rail on.

Cool i Like it

the only other thing drip rails was used for back in the day was roof racks they locked onto the drip rails lol

Yeah big mistake, they are there to take the rain away from the occupants of the car when exiting the car when it's raining, don't get me wrong it looks good but it reminds me of my young mechanic neighbor a few years ago, he had a skoda fabia and he decided to move the air intake to behind one of the fog light blanks as if it would get more unrestricted air, the only problem came when he drove through a low area that was flooded due to the heavy rain we had and it instantly fucked his engine due to sucking all that water in. Cars designs are there for a reason, you need to think of the reason that the drip tray exists and then decide to change it, before you come back and mention the modern look, modern cars have roof rail channels and the roofs aren't domed as much as the old Mustang. Anyway, great upload and good luck with the project.

Damn fine job.

Thanks for showing this in detail. Just what I need. Noob question, what type welder and setting did you use? I'm gonna eventually have to do this to a beetle. Someone half finished the delete and I don't want to melt the roof off. Lots of practice first tho. Thanks 👍

Removing the drip rails on my 77 911.

His unicorn that he can't finish

It does look good the way you did it.I am wondering how he's going to get the Windshield wiper system in with that area welded shut though??They will be needed for inspection for tags.

It's a rust trap now where it's been welded and the doors won't be as weather proof. Modern designs carry a double seal when drip rails are deleted !

Nice work gotta make Ben help u more now haha

Hi you wow Love,s Like,s ♥️💯♥️💯♥️💯♥️♥️♥️💯💯♥️♥️💯♥️💯

Yuri jesteś kozak 😂🤣 pozdrawiam 🇵🇱

😎🤙🦅

Wait until it starts raining then open the door drip rails are there for a reason to. Anyhow what do I know. Hahaha

At 9:57 is a perfect example of how weak that flat sheet metal he has in that engine bay is. Had it been bead rolled, that noise would not have happened because it makes the metal much stronger. It is going to sound like a botls in a tin can going down the road. That is not taking account into the other, lets say errors of judgement to be kind that have been made.