Cybergun Colt 1911A1 airsoft unboxing | The best airsoft pistol??? 

I love metal gear, thank you for this comment. Snake eater was my first mgs game.

How much shots do you get withe one co2 12g?

@@marcoborg Depends how fast you shoot it. If you are pulling the trigger as fast as possible you will get about 50 shots. If you are taking your time between shots you will get about 70. I usually only load 7 or 8 BB's in a mag to discourage myself from mag dumping. Considering that I can get about 50 cartridges for fourty bucks it's pretty cheap but it definitely isn't easy on CO2. If you do pick one up just keep in mind that the biggest pain about it isnt the fact that it uses a lot of gas; but because you have to constantly clean it after use, so that it doesnt start jamming on you. Also do not get one with a BAXIS hopup system its a flimsy POS that hinders performance more than any other type of hopup I have seen.

@@marcoborg I once had a video on my channel all about the weapon but salty trolls kept posting nasty comments so I quit making videos.

@@thejayman1886 thanks very much for you help, i really appreciate.

@@marcoborg You're welcome. Glad to help.

Someone did mention that to me before but thanks for confirming that. You learn something new every day.

​@@DTWAIRSOFT where can I by this gun online?

​@@aricaallendelgado3968 literally any airsoft shop

Is there a link to this pistol?

Hi, yes a few have pointed out my mistake in that and I'm glad they did, obviously I need a few more history lessons but I'm glad people have told me. It's the only way to learn

I’m not a airsoft guy, but just browsing tonight, the First of the 1911’s were a walnut grip later changed to what people called “colt wood” AKA plastic for the war efforts cause of reliability in weather and mostly cost, but that’s been beaten into the bush by now!😂 Hey… I noticed you said you wish could shoot a real one, I’d take you out for a shoot if you were in Utah!! Wish you guys the best! Thanks for the entertainment tonight! Peace!!

@@bannanapancake I browse Utah and above all the most dust bowl states by google satelite pictures and street view. This is like holidays and I love all the old deteriorated buildings in all the small villages. I was totally amazed by all the well preserved traces of the settler and their cattle drawn wagons going to the west. Especially the Santa Fe trail/ Cimarron cutoff where you can follow the trail from satelite view down to Santa Fe. Btw. Shooting guns in germany means having a permission and being a member of a gun club. Not really difficult to obtain but rather unpopular since ww2.

@@rainerwahnsinn9423Other than having all the modern conveniences and tech, these western states still have a lot of history from those time periods just laying around, I recall a story of a Winchester rifle being found just leaning up against a tree somewhere in Nevada if I remember right, don’t recall how old it was, but it was a cool story/picture for sure(just google old rifle found next to tree Nevada, should pop up) There’s a lot of everything being talked about guns these days. I own quite a few, most of mine are historic, I own a m1 Garand, M1a, 1911’s, 1863 Springfield (civil war) and a host of modern firearms we go out to the dessert to shoot. I don’t have any inclination to wanna hurt anyone or be hurt either. I admire them for the entertainment, history, and the fun times it brings with family and friends. Looks like you guys a having a good time what your doing! Keep at it! Nothings better than keeping friendships alive no matter what it is or what the circumstance is.

They are one of the differences between the original 1911 (wood grips) and the 1911 A1 (bakelite/plastic grips)

The only down side to this pistol in my opinion are the magazines as they are prone to drying out and leaking over time, other than that you are right they are a very good pistol

I am just wondering, does the mag suppose to fit loosely? or should it be clicking when you slide it in?

Are you sure it's compatible with WE parts? My disconnector and leaf spring are worn out and Im struggling to find spare parts for KWC Colt.

Is this better than the Tokyo Marui version in terms of performance?

Hi I'm loving this pistol in cqb but I only have mag and can't find any more mags only 😢

I love my 1911, I hope you will too

I never knew the originals had plastic grips..... Live and learn, thanks for the knowledge bomb on that one 👍

The WW1-era 1911s and M1911A1 pistols up until 1940 had wood grips. In 1941 plastic grips were introduced and used all the way through 1945. After the war Colt continued to use plastic grips on the commercial models until 1970.

@@DK-gy7ll people tend to forget that bakealite Plastics were invented in 1907 BUT only widely available around 1940. Isn't it crazy to think that in the last 120 years there has been more technological development than in the past two hundred thousand??

I was just going to do this

I would love to shoot a real 1911

6mm airsoft bb's. It uses a 12 gram CO2 cannister to propel the BB. Hope this helps.

Isn't .20 reccomended for most guns like this?

I have one as a primary for cqb, everything is stock and has lasted me over 3 years with no problems. Maple leaf hop units and barrels will fit in this. As for steel hammer assembly parts I'm not sure

Thanks i have a good teacher

💀

That is a bargain! I do love 1911s

@@DTWAIRSOFT It looks amazing in an M7 tanker's shoulder holster as well.

@@allenkennedy99 oooooo very good choice

If you want to take the paint off best way is to strip it and use a very fine sand paper 1000 grit. Or try putting a clear coat over the top of it to try and protect the paint

@@DTWAIRSOFT Thank you so much !

Never do anything like that never!

That makes me sad. Hope you find it again

Where did you buy the gun at? his link don’t work anymore and I kinda wanna buy one now.

@@MonkeyNutsOnBigChoppersdid you find it by chance?

And beautiful.... Don't forget beautiful

Still the best One mate

Ma se sei Vodafone user devi essere italiano 😂

@@TM450FI not sure what you‘re saying but I got this model two months ago and it‘s amazing! :D

@@vodafoneuser1690 i tought you were italian because of your nickname haha great pistol

Sorry I can't help you, I'm in the UK and we don't have orange tips on our airsoft guns

I may be late to this comment but will say anyways. Pretty sure WE/AW mags work with it including the green gas mags from them too. Hope that helped

@@tomthegiant01 That would be amazing. How would that work if it did? Wouldn’t green gas be too weak to cycle the slide?

​@@mondaymotivator_ Well, you have WE Tech and you have AW (Armorer Works) which is the premium side of WE Tech so all mags from them will be usable (1911). As for the green gas, as the 1911 is full metal (excluding grips) so the gun can handle the pressure of green gas. Plastic Airsoft pistols is what can get damaged. Also, Green Gas has a bit of silicone oil in it which actually helps partly lubricates the slide. I have the Cybergun Colt 1911 from AW and that came with a Co2 mag but I use a AW green gas mag for it instead.

@@tomthegiant01 That sounds reasonable. Once I get the money, I'll give it a try. Thanks

I normally use the Abby silicon grease on my slides. This one did need a grease up out of the box. You can run them dry but trust me you don't want to do that.

Most airsoft pistols should have no problem hitting a can at 10M consistently as long as you have a clean inner barrel and good quality bbs. The best out of the box consistency I have seen was with a TM hi-capa with a grouping of about 1.5 inches at that sort of range

@@DTWAIRSOFT Thank you for your tip! Those also seem to have a nice blow-back effect, which for me is the main point with this type of gun. But I still want to hit things. (My replica Colt SAA 7'5".177 with a rifled bore groups 3/4 inch at 10m, and for precision target work, I have non-replica airpistols.)

@@andersgrassman6583 you will never get the same accuracy when compairing airsoft to air guns mainly because airsoft barrels are a smooth compared to the airguns that have bored barrels

What kinda problems? I have owned mine for about two and a half years. Only problems I have had is with leaky mags. When these brake it could easily be because you didn't clean or oil it. Shoot.

@@thejayman1886 I kept the gun in tip top shape and the problems I had were the hammer breaking ,the slide catch breaking and the mag leaking. And the accuracy is terrible on the gun I own

@@hardcoreairsoft5270 how long have you had the pistol? Yeah that is kinda shitty dude sorry to hear it gave you so much trouble.

@@hardcoreairsoft5270 the mag that came with mine started leaking so bad that it is enough to part your hair even after I used a cylinder access key to clean and re-tighten the piston in place. I feel your pain dude.

@@thejayman1886 I've only had it for 3 months but brought it to 3 airsoft games

Thank you

Only gas mags I can get to work with it are the KWC ones

No I Dont have that. Does it shoot OK?

Yes these work well with the hop adjusted,

No gas should not drain out of the mag, iv kept co2 in these for weeks without any problem

@@DTWAIRSOFT So it lasts for two weeks in the revólver without shooting it or you can Keep going with the co2 installed in the pistol?

@@brunofilipesoares8783 You could leave it in the pistol and the gas will stay in the mag but i wouldnt leave the mag in for safety reasons.

@@DTWAIRSOFT in my case i have a revolver wich uses cartridges and not mags so i just take out the cartridges and leave the co2 in there resting?

@@brunofilipesoares8783 In That case yes that is fine to keep the CO2 in the revolver.

Are you loading it from the top or bottom?

I’d assume so since it has an adapter thing

Got to love a 1911

Sorry bud but I can't find anywhere that has it now

Ok thank you anyway for looking

@@josephhession7681 hey Amazon has some for $166

Ok thank you

no these are for 6mm only. I think you can get them in 4.5

Yeah, lol same here.. its sucks loading this gun

@@kamamat530 did you test it on chrono? My replica has 0.5J with 0.25g bbs. My green gas glock thats supposed to be weaker than this is 0.9J lmao

@@razvan19010 i dont have chrono so no. My version is 1.0 J

Yeah thats relateable LOL. Make sure you dont trim the nail on your thumb to short of those feed lips and that spring will bite! Also be careful when loading 8 or nine rounds in a mag, because there is a 50/50 chance that when you push the spring back in place it will shoot a bb at your face. Also mine is 1.5 joules.

@@thejayman1886 mine says 1.0 joules but it only shoots at 0.5 joules, thats why im asking.

It's the 12g non threaded ones you use on this

It just comes straight off, if it leaves any glue just a small squirt of silicon spray will take it off

No you have to buy the Co2 separately

I haven't seen a crome co2 1911a1 but WE do a crome greengas version

sadly its not made of steal

@@DTWAIRSOFT Thanks for answer. I asked because JoergSprave said in one of his videos his Cybergun 1911 is made of steel, I asked and he confirmed. His 1911 looks same as yours, same blue box, but mag capacity is 15, not 17, so maybe is slightly different. But is still hard to believe among all those metal alloy 1911 replicas, was steel one, and no one even mentioned it.

@@CoRudickuNic You can get after market steel slides but iv not seen any steel 1911s come as standard in the airsoft world. I Might have to look for his video

​@@DTWAIRSOFTさん。楽しい動画ありがとうございます。イノカツというメーカーの商品はスチールですよ！

you will be very lucky to find a new one for less than £100

You should only use plastic bbs in this.

Yes they are

Thanks

No you can't on this one

At the moment the wholesalers are waiting for more to come into the country 😭

Amazon had some right now for $166

I believe its KWC

We do it for £134

No it's not but has the company have the license to have the full colt trademarks on it.

Thanks for letting me know also where can I get an extra magazine for the gun?

I saw it for 120, but that was prior to the US import price (45ish); Although I’m having troubles finding a US seller

That's a shame I'm sorry to hear that. Iv not seen that happen to this, it's normally mags leaking from the top.

finally! someone noticed one of my "easter eggs" well done 😁

@@DTWAIRSOFT good one 😆 I love it when channels put in the Easter eggs! Even better finding them!