Hi, a 2-in-1 Seat that grows with your little one throughout their childhood, from toddler to pre-teen. Your child is protected by an impact shield until they weigh 21 kg. Then, the impact shield is removed and the seat is secured by the vehicle seatbelt, providing reliable protection until your child is 150 cm tall (approx. 12 years old).
Hi, to change the Pallas to the 3-point vehicle belt configuration you only have to remove the impact shield. Please follow the instructions in the user guide on how to remove the impact shield and change the configuration. The child is then secured by the 3-point vehicle belt. You can convert the Pallas after your child exceeds a height of 100 cm. This is not mandatory however, and you can continue to use the Pallas car seat with the impact shield until your child reaches 105 cm in height. However it is obligatory to detach the impact shield once the child has reached 21 kg.
@@cybexglobal i understand that. But when the child is 100+cm I can use 3-belt with or without: " top teter anchor" connected? You have it connected! And you simultaneously say "only 3 point belt"
Once the impact shield is removed and your child reaches 105 cm or 21 kg, the car seat is installed using the vehicle's 3-point seat belt and isofix or alternatively only the vehicle's 3-point seat belt. In this configuration, the top tether is no longer required.
To remove the cover, unclip the press-studs and elastic bands holding it in place. Once the attachments are released, the cover can be washed at 30°C with a delicate wash program to prevent discoloration. Remember to wash the cover separately from other laundry and avoid drying it in the dryer or direct sunlight to maintain its fabric quality. If you have any other questions contact us via our contact forms: www.cybex-online.com/en/gb/service-hub/contact/contact_us.html