CYMA MP5 Blue Edition UNBOXING - Is it WORTH it? 🤔 

Can you just drop in the M4 Prowin unit ? or do you need to modify it ?

@Hamish McIndy ty. Am gonna try a G&G green first. But have a prome, if it gives me trouble. What about the hop unit ? Any advice ?

wait.are you talking about an m4 hopup inside a mp5?

@@raitrometkuuse1083 yes

Hell Ei, i got the CM.041J BLUE EDITION a week ago and the hopup is driving me crazy. It's absolute shit. I am a mechanical and airsoft noob unfortunately and can't seem to find info on a good compatible hop up chamber to replace the ridiculous plastic strip hopup the gun came with. Could you give me the model of what chamber worked for you or any other hopup you would recommend for this gun?

What drum are you using please mate?

@@mehdib4871 hi mate it's a G&G mp5 1200rd drum mag, you manually wind it on the front but honestly it's mint. Problem with mp5s is even the high cap mags are only 200rd

Are you telling that Cyma Platinum mp5 are equipped with the same mosfet of the m4's models? Indeed had to put a titan in my m4 Cyma plat, mosfet burned in 3 games. 🤮😂

Hls survival and bushcraft accuracy is okay but you are limited to what you can do with the hop unit. For the price, it’s a great gun but it’s still a budget option. Upgrades help but there are no aftermarket hop units which is a shame.

@@BIGBIRDSAIRSOFT ok thank you 👍

TheFallenAngel you’re welcome 👍 have fun.

What material is it made of?

@@lr3m743 Mainly metal, but some plastic parts.

@@thefallenangel5190 ok thank you

Scott Gafney I’ve not had chance to do anything to it yet, but it is on my list of things to do. Not sue when though.

There is something very special with a full HK loadout especially if there is a bit of flecktarn too 😉👌 Everyone needs a bad gut AK though lol. Look out the Specna AK review soon.

Try putting a big of grease on the back of the selector, it just helps it move.

BIGBIRDSAIRSOFT , sounds like a good plan👍 thanks

This one is in package with mp5

Callumbia Snow this gun can be awesome, just needs a little tune. The mp5 is so cool.

Leo AP any14mm ccw threaded suppressor. There is a threaded cap on the end of the barrel. Or you can fit the bayonet type that I have. I can’t remember where I got it from though as I’ve had it 10 years. I just remember I got it from HK.

@@BIGBIRDSAIRSOFT That's great, thanks a lot for the quick answer!

Neverminf you answered in the end of the vid 👍 thanks mate. Complete review.

LinuxMeister I put 7.4 lipos in guns without mosfets all the time. This one is no different. I wouldn’t risk 11.1’s but 7.4 should be fine. Your trigger contacts will probably wear out a little faster but not like you’d notice. That’s my experience anyway.

I’ve tried literally only tried an SRC hand guard, and that fits but sorry, I haven’t tried any others.

Sorry mate I didn’t take it off mate.

@@BIGBIRDSAIRSOFT Ah! grim, time to hit it slightly harder and see if I can't get it loose :D

Because it would be illegal. Also most UK sites only allow 350fps on full auto.

Greenie I’ll be honest, I’ve done nothing with it as yet, I can’t keep up lol

BIGBIRDSAIRSOFT no problem.look forward to it when you get time😁👍

The Bolt mp5 mate. It’s an excellent replica if a little expensive.

The cyma.Bolt is a Bad brand, it will Break.Cyma however, while Feeling cheap, wont and for the left over money you can Upgrade it.

SerDaveOfRindyar over here the Elite force guns are called Umarex for some reason but they are solid builds form what I’ve seen, but quite expensive when compared to Cyma. Real shame you can’t get them. Licensing 😒

They won't make a metal receiver SD model for some reason, we're stuck paying $180 USD (currently) for the plastic more or less un-modifiable version

SerDaveOfRindyar that really sucks 🙁

Lunch They are indeed👍🏼 Recently I dug out my very first AEG (CYMA MP5SD6) from the closet and converted it to an SD5, put an Warfet in it and changed out a few things. IMO CYMA’s really, REALLY great base replicas to tinker with AND the externals a rather sturdy.

Mp5s are such a lovely platform

Simon Baeck sorry mate, I only have the SRC stock and not the Cyma. The SRC doesn’t fit without modifying.

It will fit.Although I would prefer the folding Stock over the minimal sliding stock

Dunstano I feel your pain! I’m waiting for a gun to arrive for a review 😬 honestly I have learned the hard way. I’m pretty good at mechanics as I spent many years building and racing motorbikes. When I started airsoft I thought “I can do this”. I made many mistakes, listened to bad advise and eventually found my own way around an Airsoft gun. You never stop learning. There are lots of “how to” videos and some are good and some are rubbish. Best thing to do is learn the basics of how the gearbox works. Shimming, air seal, motor height, and greasing the correct parts. Learn how the hop unit works and get a good quality hop rubber and nub. Don’t worry about all the R-hops, DSG setups as most of it will just cause you more pain and no gain. Lean to solder and get a good soldering iron, they’re not expensive. I do some stuff that I don’t really see anyone else do but I know works. 👍 go slow, don’t loose springs and take photos so you don’t forget.

BIGBIRDSAIRSOFT haha cheers for the advice and keep up the good work, love the in depth tear down videos gives me the confidence to look into mine because I know what I’m actually looking at now. Where do you source parts from and will most parts fit every v2 gearbox?

Dunstano I get my parts from all over the place but Bullseye Country Sport have a lot of what I use. Most V2 stuff fits but it is alway good to match parts. Some of the high end stuff is good but so are the SHS parts to save some money.

Skatarded if the screw is already tight, you can take it out and put a small o’ring on the screw and put it back in. The o’ring will grip the slide and stop it moving.

@@BIGBIRDSAIRSOFT thanks man! lucky i recently ordered some o rings

mark evans it was from one of the HK shops I can’t remember which one as I’ve had it about 10 yeas, sorry.

Eventually if you make a habit of it. Now and again will be fine.

No, not at all.

@@BIGBIRDSAIRSOFT thanks!

007alvareichon possibly but you’d have to change the selector plate and possibly the nozzle. I can’t imagine why you’d want to though.

Greenie 7.4 👍

Yeah but the scar will go a lot farther. To be honest, the 20m groupings are just for reference, I’m finding more and more that there are too many contributing factors to draw any major conclusions between guns. You live and learn I guess 👍 you’re right about Cyma though

BIGBIRDSAIRSOFT Aye, love what you’re doing man. Let’s see some gameplay!!

@@BIGBIRDSAIRSOFT hey man, sorry to peck. Did you use a SHS M4 nozzle in this?

@@ronlancs1874 hi mate, I’m really sorry but I can’t remember for sure, but I think it would have been an MP5 nozzle.

@@BIGBIRDSAIRSOFT cheers pal no worries. Just can’t seem to find an MP5 nozzle that’s got a good review and I’m getting ignored on AFUK 😂 cheers anyway mate

Cem KILIÇ I have one on order, hopefully it will arrive by the end of the week 👍

@@BIGBIRDSAIRSOFT nice.

pribor_333 probably but it depends on the dimensions.

Green Star Gaming Gunfire

BIGBIRDSAIRSOFT I couldn’t find it, can you post a link, please

Green Star Gaming apologies it’s actually Taiwan Gun www.taiwangun.com/en/electric-3/cm-041-blue-limited-edition-cyma?from=listing&campaign-id=14&q=Cyma

Looking at buying this gun from this. How long did postage take?

Yes mate, 1600mah 25c is the one I used.

@@BIGBIRDSAIRSOFT yo if I use a 8,4v is it good ?

@@AZ2UR1X_QC it will be okay but l prefer 7.4 liPo

@@BIGBIRDSAIRSOFT okay thx bro

Lol yeah, I always have something on in my room but turn it off when I’m speaking. This time I totally forgot. This week, it’s Rick and Morty lol

@@BIGBIRDSAIRSOFT nah it's fine I love your vids. Was gonna buy the specna e05 cause it was on sale but it's sold out :(

Karl Roadie it really comes down to details. The Cyma is cheaper than even the Specna Core series and so are the magazines. However, the Specna has some nice addition. It’s AR/M4 based so there is a mountain of accessories and upgrades such as hop units etc. they have a quick change spring gearbox (that’s only good if you work on them really) and usually a rail system dependant on the model. Not forgetting nearly all tactical gear is set up for AR mags. The MP5 is awesome because it’s not an M4! Lol. You’ll be good with earthier and a lot is to do with which you like the look of but, honestly, the Specna’s are hard to beat for value. Just makes sure you get the gearbox checked, greased and shimmed.

BIGBIRDSAIRSOFT thanks for info I am looking more to spencna for ability to upgrade parts.👍

👍 you can do a lot with them. Everyone thinks my 416 is a high end gun but I’ve just done lots to it.

BIGBIRDSAIRSOFT have bought a specna sa-eo1and fitted red scope and looking to get a pts stock.happy with purchase 👍

Aznaur Kasumov it’s okay. Maybe a little shiny compared to more expensive brands but still not bad at all. At this price too.

Check here, www.taiwangun.com/en/aeg-mid-cap/magazine-mid-cap-for-mp5-long-cyma?from=listing How do you like the SD?

What about king arms mags?

Robbie Sutherland I haven’t got any to try, so I’m not sure.

@@BIGBIRDSAIRSOFT i believe they will work