Dakotah Phend talks about winning the 4WD Short Course A-Main event for the second year in a row. Check out our full coverage of the 28th Annual Cactus Classic here: www.rccaraction...
The guy doing the interview seemed so in to that interview... *Sarcasm* But as far as the race, it was nice to watch. The camera person wasn't making you sick with the back and forth movements either, I could tell what was going on thanks to the camera guy/girl lol
Was he running just a 2s in their? I suppose he is running a Tekin RX8 with a pro 4 4600kv combo, but that kind of speed with just a 2s?!?!?! If thats true, thats crazy!
+Kaleb Moore I thought 550 wasn't roar legal? From my understanding you have to run a 540.. Or is that just for 4 pole motors? I understand Dakota runs 2 pole setups?
+Kaleb Moore Looks like your right, I just looked up the ROAR rule guide and found this> 8.6 10th scale 4×4 Short Course Truck (SCT) 550 Motor The rules contained in this section apply to the 550 motor for the SCT 4X4 class for only. 8.6.1 Can: 8.6.1.1 Maximum overall length is 73.0mm measured from the mounting face of the motor to the furthest most point on the endbell, not including solder tabs, lead 48 wires, sensor plug or housing, or the manufacture’s logo or name. Motor mounting holes must be on 1.00 inch (25.40mm) centers. Diameter is 36.02mm 8.6.1.2 Stator: Motor stator minimum length is 35mm (- 0.15mm tolerance) with maximum length of 42mm. The thickness of the laminations shall be 0.35mm. A ‘go-nogo’ gauge 14.500 +0.000/-0.005mm diameter shall pass into the stator, clearing the stator plus its windings and the electrical collection ring at the end of the stator. 8.6.1.3 Rotor: External shaft diameter may be either 0.125 inches (3.175mm) or 0.197 inches (5mm). Only one piece, two pole Neodymium sintered, or Ferrite (Ceramic) magnetic rotors are permitted. The magnet length shall be a minimum of 39.0mm and maximum of 46.0mm not including any nonmagnetic balancing material. The magnet outside diameter shall have a minimum of 12.3mm and a maximum of 14.0mm, no tolerance, for the entire length of the magnet.