I have a question dude. Are the shells from the colt single action fit the same in the dan Wesson? If it does. Could you make a video to see if is more powerful with them than the original ones.
Well someone may go mad and shoot you with a highly deadly gel ball, they could take out a whole mall full of people can you imagine the horror of folk covered in gel ? Oh the humanity. Yep it's fkn ridiculous l would like to know what's going on its nearly as bad over here dear old blighty. My sympathies to Australia.
I have a dan wesson 2.5 inch , is not very powerful but i have adapted a nut in the hammer spring to increase the fps, You can also try that with your dan wesson 8" that will increase the fps.
that dousnt inceease the fps 😀 The only way is to replace the parts there is a upgrade video on youtube. You will need the parts that are in the 8 inch version
Hello there. I recently received my Dan Wesson 715 Pellet version which I only used today. When I inserted the CO2 capsule into it and screwed it tight, I could still hear a small hissing sound (it's leaking out very slowly). The hissing sound stopped when I put a loaded cartridge into the barrel (to prevent the leak). Is that supposed to happen? Or does it mean the seal is failing?
@@HappyDude1 Hey there, I just tried another capsule today. I screwed it tight and fast before it could lose too much gas initially. But once it's screwed solidly and I put my ear near it, I can still hear the hissing sound. When I put my finger on the firing hole behind the drum, the hissing stops (since I plugged it with my finger). Do you think I should return it? I was still able to shoot around 60 rounds, but I'm thinking it shouldn't be leaking.
Happy dude pleaaaseee please buy a bersa thunder 9 pro it's a powerful cheap super cool co2 pistol it goes thru 2 sides of water bottle even with water and make dent in wood
How big are the inner barrels on these 4.5mm? In aus we got the same thing cept our inner barrels are 7mm, with the peacemaker the shells are 4. Sometning mm and on the end has been bored out to 7mm to stick a gel ball in ghe end i shot a 4mm steel bb out of it but its a little loose😊
@@user-lk3bi4yn1k I tried to get parts like barrels or gas valves to make a powerfull airgun but you can't The only way is to buy the guns with the parts you need
@HappyDude1 I'm happy with the power it's shooting over 400 fps I just want to change the barrel over to shoot BBS and pellets simple barrel and shell swap
@@HappyDude1 ty I subscribed. I want to order a Dan Weson 8" but has to be same as yours and I don't wanna mistake. There is a 8" version low power and there is no version with steel BB's but I saw your video where the box contains the steel BB box inside
Hey Happy dude , maybe u won’t believe but it’s possible to break glas with plastic bbs , shot an beer bottle In pieces with 0.12g bbs (1.5 joule the airsoft) , crazy right?
Apparently, you can get "rear loading" cartridges for the Dan Wesson revolver, that give you even more powerful shots, because there is no air space behind the BB and the barrel is effectively longer and also they are more convenient to load.
@@HappyDude1 The "rear loading" is for pellet with Dan Wesson 715, as far as I know (I have one, and this time it's not leaking). Every BB Dan Wesson looks like the BBs are loaded at the front of the cartridge.
I've had two silver peacemakers both shot 130/140 pellets to 1 bulb of co2 for some reason, the black ones l have would only average 60/70 which ain't bad, but it's weird they're the same gun but the nickel silver fire more pellets,
How,? How would it work without gas ? It's not spring loaded, the clue is in the gas, a portion of gas is blasted into the chamber holding the pellet which propels the pellet, turn off the gas and..? No it won't work without gas.
@@HappyDude1 helaas zonder resultaat, idem bij de vishandel. Gelukkig had Grimberg.me nog leuke spullen zoals de Grimberg Fsc met optionele 8 inch barrel. Kijk het even na , veel leuker dan deze speelgoedjes. Groeten!